Scotch C60-ST

Scotch Desktop Tape Dispenser, Silvertech Two-Tone (C60-ST) User Manual

1. Vöru lokiðview

The Scotch Desktop Tape Dispenser, Model C60-ST, is designed for convenient, one-handed tape dispensing in office or home environments. It features a durable construction with a weighted, non-skid base to ensure stability during use. The dispenser accommodates standard 1-inch core tape rolls, up to 3/4 inch wide and 36 yards long. Its two-tone silver and black design offers a sleek aesthetic suitable for various desk decors.

Scotch Desktop Tape Dispenser, Silvertech Two-Tone (C60-ST)

Figure 1: Scotch Desktop Tape Dispenser, Silvertech Two-Tone (C60-ST)

2. Uppsetningarleiðbeiningar

2.1 Loading Tape

Follow these steps to load a new roll of tape into your dispenser:

  1. Gently pull up the tape hub (the central part where the tape roll sits) from the dispenser base.
  2. Place a new roll of tape onto the hub, ensuring the adhesive side of the tape is facing down and will unroll from the back of the dispenser.
  3. Push the tape hub back down into the dispenser until it securely snaps into place.
  4. Pull the leading edge of the tape forward and across the cutting blade.
Scotch Desktop Tape Dispenser with tape loaded

Figure 2: Tape dispenser with tape correctly loaded

3. Notkunarleiðbeiningar

3.1 Dispensing Tape

To use the tape dispenser:

  1. Hold the dispenser firmly on a flat surface. The weighted base and non-skid pads will help keep it stable.
  2. Pull the desired length of tape forward from the roll.
  3. Once the desired length is achieved, press the tape down against the cutting blade with a swift, downward motion to cleanly cut the tape.
Hand pulling tape from Scotch Desktop Tape Dispenser

Figure 3: Dispensing tape from the unit

4. Viðhald

4.1 Þrif

To maintain optimal performance, periodically clean your tape dispenser:

  • Þurrkið ytra byrði skammtarans með mjúkum klút.amp klút. Forðist slípiefni.
  • Remove any adhesive residue or small pieces of tape that may accumulate around the cutting blade or tape path. Use a non-sharp tool for this to prevent damage.

4.2 Umhirða blaðs

The dispenser is equipped with a high-quality cutting blade designed for longevity. If the blade's effectiveness diminishes over time, ensure it is free from tape residue. The blade is not user-replaceable.

5. Bilanagreining

ÚtgáfaMöguleg orsökLausn
Tape does not cut cleanly.Residue on blade; dull blade.Clean the cutting blade. Ensure tape is pulled firmly against the blade.
Dispenser slides during use.Surface is too smooth; non-skid base is dirty.Ensure the surface is clean and dry. Clean the non-skid pads on the base.
Tape roll falls out of place.Tape hub not properly seated.Ensure the tape hub is pushed down until it snaps securely into the dispenser base.

6. Tæknilýsing

EiginleikiSmáatriði
GerðarnúmerC60-ST
Mál (L x B x H)3 x 2.25 x 6.25 tommur
Þyngd hlutar15.8 aura
LiturSvartur/silfur
Tegund efnisPlast
Kjarnastærð1 tommur
Max Tape Width3/4 tommur
Max Tape Length36 metrar
Hlið view of Scotch Desktop Tape Dispenser

Mynd 4: Hlið view of the tape dispenser, highlighting its compact design

7. Ábyrgð og stuðningur

For information regarding product warranty or technical support, please refer to the official Scotch brand webvefsíðu eða hafðu samband við þjónustuver þeirra beint. Geymdu kaupkvittunina vegna hugsanlegra ábyrgðarkrafna.

Samskiptaupplýsingar:

  • Websíða: www.scotchbrand.com
  • Þjónustudeild: Vísa til websíða fyrir svæðisbundnar tengiliðaupplýsingar.