Himalayan Glow 1002

WBM Himalayan Salt Lamp Notendahandbók

Your guide to setting up, operating, and maintaining your natural Himalayan Salt Lamp.

WBM Himalayan Salt Lamp with its packaging box

The WBM Himalayan Salt Lamp, a natural crystal lamp designed to enhance your living space.

Inngangur

Thank you for choosing the WBM Himalayan Salt Lamp. Crafted from 100% natural Himalayan salt crystals, this lamp provides a warm, inviting glow and is believed to offer air-purifying benefits. Each lamp is uniquely carved, ensuring a distinctive piece for your home or office. This manual will guide you through the proper setup, operation, and care to ensure you get the most out of your salt lamp.

Vara lokiðview

Your WBM Himalayan Salt Lamp comes with the following components:

  • Himalayan Salt Crystal: Meginmál lamp, hand-carved from natural salt.
  • Viðarbotn: A sturdy and elegant base that supports the salt crystal.
  • LED ljósaperur: An energy-efficient LED bulb designed for long-lasting illumination.
  • USB Power Cable with Touch Dimmer Control: Allows for easy power on/off and brightness adjustment.
Diagram showing the LED bulb, E12 base, 5V USB power adapter, and dimmer switch components of the salt lamp

Illustration of the salt lamp's key components: the LED bulb, E12 base, USB power adapter, and dimmer switch.

Uppsetningarleiðbeiningar

Follow these steps to set up your Himalayan Salt Lamp:

  1. Taktu upp: Fjarlægðu alla íhluti varlega úr umbúðunum.
  2. Skoðaðu: Check the salt crystal and wooden base for any damage.
  3. Settu inn peru: Gently insert the LED bulb into the bulb holder located within the wooden base. Ensure it is securely seated.
  4. Staður Kristall: Carefully place the salt crystal onto the wooden base, aligning it so the bulb is centered within the crystal's cavity.
  5. Tengdu rafmagn: Plug the USB end of the power cable into a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank).
Diagram illustrating how to install the LED light into the salt lamp grunn

Visual guide for inserting the LED bulb into the lamp's wooden base.

Notkunarleiðbeiningar

Your WBM Himalayan Salt Lamp features a convenient touch dimmer control:

  • Kveikt/slökkt: Tap the power symbol on the dimmer control once to turn the lamp kveikt eða slökkt.
  • Stilla birtustig: Þegar lamp is on, press and hold the power symbol on the dimmer control. The brightness will gradually increase or decrease. Release your finger when you reach your desired brightness level.
Hand demonstrating the touch dimmer control on the salt lamp's USB cable

A hand operating the touch dimmer control on the lamp's USB cable to adjust brightness.

Person meditating in a room with the glowing Himalayan salt lamp, creating a relaxing ambiance

Saltið lamp provides a relaxing ambiance, ideal for meditation or creating a calming environment.

Viðhald

Proper care will ensure the longevity and effectiveness of your salt lamp:

  • Þrif: Til að þrífa lamp, gently wipe the salt surface with a dry or slightly damp klút. Do not use excessive water or immerse the lamp í vökva.
  • Raki: Salt lamps are hygroscopic, meaning they absorb moisture from the air. In humid environments, the lamp may appear to 'sweat'. Place a coaster or mat underneath to protect furniture. If sweating occurs, turn the lamp on for a few hours to dry it out.
  • Skipt um peru: Ef skipta þarf um LED-peru skal ganga úr skugga um að hún sé rétt.amp is unplugged. Carefully remove the salt crystal from the base, unscrew the old bulb, and screw in a new compatible LED bulb (E12 base, 15 watts recommended).
  • Geymsla: Ef geymt er lamp for an extended period, wrap it in a plastic bag or airtight container to protect it from moisture.

Úrræðaleit

VandamálMöguleg orsökLausn
Lamp kviknar ekki.Enginn rafmagn, laus tenging, biluð pera.Ensure USB cable is securely plugged in. Try a different USB port or adapter. Check if the bulb is properly seated or needs replacement.
Lamp is 'sweating' or dripping water.Mikill raki.This is normal in humid conditions. Keep the lamp on for several hours to dry it out. Place a protective mat underneath. Avoid placing in high-humidity areas like bathrooms.
Ekki er hægt að stilla birtustig.Dimmer malfunction.Ensure you are pressing and holding the touch control. If the issue persists, the dimmer unit may be faulty and require replacement.

Tæknilýsing

EiginleikiSmáatriði
Gerðarnúmer1002
EfniNatural Himalayan Salt Crystal
GrunnefniViður
Vörumál5" D x 5" B x 9" H
Þyngd hlutar6 Pounds (approx. 5-7 lbs)
Tegund ljósgjafaLED
Hvaðtage15 vött
Voltage120 volt
SkiptategundTouch Dimmer Control
Lengd snúru72 tommur
AflgjafiRafmagns með USB snúru
Inni/úti notkunAðeins innandyra
Samsetning krafistJá (minniháttar)
VottanirUL, ETL

Ábyrgð og stuðningur

Upplýsingar um ábyrgð

WBM LLC warrants its products to be free from defects in material and workmanship for 30 days from the shipment date unless otherwise noted. WBM LLC will replace any item returned within the parameters of this policy and found to be defective. All returned warranty-issue merchandise must be properly packed for a safe return shipment and in original purchase condition with the original packaging, the original receipt/invoice/packing slip, and an explanation of the item's problem. WBM LLC will not refund, credit, or cover shipping expenses for warranty item returns or warranty item replacements under any circumstances. WBM LLC is not liable for misuse of its products. This warranty does not cover damage due to abuse, neglect, alteration, failure to follow instructions, shipping damage, or damaged packaging. WBM LLC expressly disclaims all express warranties not stated herein and all implied warranties, including the implied warranties of merchantability and fitness for a particular purpose.

Þjónustudeild

For any questions, concerns, or technical assistance not covered in this manual, please refer to the contact information provided with your product packaging or visit the official Himalayan Glow websíða fyrir stuðningsúrræði.