Einhell Rotary Hammer TC-RH 800 E Instruction Manual

1. Inngangur

Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.

2. Almennar öryggisleiðbeiningar

Fylgið alltaf eftirfarandi öryggisráðstöfunum þegar rafmagnsverkfæri eru notuð:

• Öryggi vinnusvæðis: Haldið vinnusvæðinu hreinu og vel upplýstu. Rúm eða dimm svæði geta leitt til slysa. Notið ekki rafmagnsverkfæri í sprengifimu andrúmslofti, svo sem þar sem eldfimir vökvar, lofttegundir eða ryk eru til staðar.
• Rafmagnsöryggi: Klóar á rafmagnsverkfærum verða að passa við innstunguna. Breytið aldrei klónum á nokkurn hátt. Forðist snertingu við jarðtengda fleti eins og pípur, ofna, eldavélar og ísskápa.
• Persónulegt öryggi: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Notkun verkfæra og umhirða: Ekki þvinga rafmagnsverkfærið. Notið rétt rafmagnsverkfæri fyrir notkunina. Aftengdu klóna frá aflgjafanum áður en þú gerir stillingar, skiptir um fylgihluti eða geymir rafmagnsverkfæri.
• Þjónusta: Látið viðurkenndan viðgerðaraðila viðhalda rafmagnsverkfærinu þínu sem notar aðeins eins varahluti. Þetta mun tryggja að öryggi rafmagnsverkfærisins sé viðhaldið.

3. Vöruhlutir

Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:

• SDS Plus Chuck
• Aukahandfang
• Dýptarstopp
• Mode Selector Switch (Drill, Hammer Drill, Chisel)
• Rotation Direction Switch (Forward/Reverse)
• On/Off Trigger with Speed Control
• Lock-on Button (for continuous operation)

Mynd 1: Yfirview of the Einhell TC-RH 800 E Rotary Hammer.

Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.

Mynd 3: Nærmynd view of the SDS Plus chuck, designed for quick and secure bit changes.

Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.

Figure 5: The ergonomic main handle designed for comfortable and secure grip.

Figure 6: The adjustable depth stop, used to set a precise drilling depth.

Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.

4. Uppsetning

4.1 Að festa hjálparhandfangið

The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.

4.2 Uppsetning dýptarstopps

Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.

Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.

4.3 Inserting SDS Plus Drill Bits/Chisels

1. Clean the shank of the drill bit or chisel and apply a thin layer of grease.
2. Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
3. Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5. Notkunarleiðbeiningar

5.1 Stillingarval

The mode selector switch allows you to choose the appropriate operating mode:

• Borun (aðeins snúningur): For drilling in wood, metal, or plastics.
• Hammer Drilling (Rotation with Impact): Til að bora í steinsteypu og múrsteini.
• Chiseling (Impact Only): For light chiseling work, such as removing tiles or plaster.

To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.

5.2 Kveikja/slökkva og hraðastýring

Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.

5.3 Snúningsátt

Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.

6. Viðhald

Reglulegt viðhald tryggir langlífi og bestu mögulegu afköst snúningshamarsins.

• Þrif: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp klút. Ekki nota sterk hreinsiefni eða leysiefni.
• Viðhald á spennuhylki: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
• Snúruskoðun: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
• Geymsla: Store the tool in its original case in a dry, secure place, out of reach of children.

7. Bilanagreining

8. Tæknilýsingar

9. Upplýsingar um ábyrgð

Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell websíða.

10. Stuðningur

Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official websíðuna til að fá frekari aðstoð og úrræði.

Opinber Websíða: www.einhell.com