Inngangur
The BRITA Marella water filter jug is designed to provide great-tasting filtered water by reducing impurities from tap water. It features MAXTRA+ filter technology, which utilizes MicroFlow technology, Micro Carbon Pearls, and Ion Exchange Pearls to reduce chlorine, organic impurities, lead, copper, and limescale. This manual provides instructions for the proper setup, operation, and maintenance of your BRITA Marella jug.
Image: BRITA Marella Cool Colours Jug in Teal, showcasing its design and filter compartment.
Uppsetning
- Taka upp íhluti: Carefully remove all parts from the packaging. Ensure you have the jug, lid, and MAXTRA+ filter cartridge.
- Hreinsið könnuna: Wash the jug (excluding the lid) in a dishwasher or by hand with warm, soapy water. Rinse thoroughly. The lid should be wiped clean with a damp klút.
- Prepare the MAXTRA+ Filter:
- Remove the filter from its protective wrapper.
- Submerge the filter in cold water for approximately 15 minutes to remove any air bubbles.
- Settu inn síuna: Place the prepared MAXTRA+ filter into the funnel of the jug. Press down firmly until it clicks into place.
- Upphafleg síun: Fill the jug with tap water. Discard the first two filtered fillings. This primes the filter and ensures optimal performance.
Notkunarleiðbeiningar
- Filling the Jug: Open the flip-top lid and fill the jug with cold tap water. The water will pass through the MAXTRA+ filter into the main reservoir.
- Filter Change Indicator: The electronic 'memo' reminder on the lid will indicate when it's time to replace the filter cartridge.
- To activate the indicator after inserting a new filter, press and hold the 'START' button until the display shows 100%.
- The indicator will gradually decrease over approximately one month, signaling the remaining filter life.
- Að hella vatni: Once the water has filtered through, you can pour it directly from the jug. The lid is designed to prevent unfiltered water from mixing with filtered water during pouring.
Mynd: Nærmynd view of the electronic 'memo' reminder on the BRITA Marella jug lid, showing the filter life indicator.
Viðhald
- Þrif: The BRITA Marella jug (excluding the lid) is dishwasher safe. For the lid, wipe it clean with a damp cloth. Do not immerse the lid in water or wash it in a dishwasher due to the electronic indicator.
- Síuskipti: Replace the MAXTRA+ filter cartridge approximately every four weeks (or when the electronic 'memo' indicator signals replacement) to ensure optimal filtration performance. Follow the filter preparation and insertion steps outlined in the "Setup" section.
Úrræðaleit
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Slow water filtration | Air bubbles trapped in the filter, or filter is nearing end of life. | Ensure the filter was properly pre-soaked. If the filter is old, replace it. |
| Filter indicator not resetting | Button not held long enough, or battery issue. | Press and hold the 'START' button firmly for several seconds until the display resets to 100%. If it still doesn't work, contact BRITA support. |
| Unpleasant taste in filtered water | Filter not properly primed, or filter needs replacement. | Discard the first two fillings after a new filter installation. If the issue persists, replace the filter. |
Tæknilýsing
- Vörumerki: BRITA
- Fyrirmyndarheiti: Marella
- Gerðarnúmer: 4006387076733
- Stærð: 2.4 Liters (Total), 1.4 Liters (Filtered Water)
- Efni: Plast
- Hreinsunaraðferð: Ion Exchange, Micro Carbon Pearls
- Sérstakur eiginleiki: Chlorine Reduction, Limescale Reduction, Lead & Copper Reduction
- Síugerð: MAXTRA+ (lasts approximately 1 month)
- Öruggt fyrir uppþvottavél: Yes (excluding lid)
Ábyrgð og stuðningur
For detailed warranty information and customer support, please refer to the official BRITA webvefsíðu eða hafðu samband við þjónustuver þeirra beint. Geymdu kaupkvittunina þína vegna hugsanlegra ábyrgðarkrafna.
You can find more information and contact details on the official BRITA websíða: www.brita.com
