AMD 199-999575

AMD Wraith Max Cooler with RGB LED Fan (Model 199-999575) User Manual

Gerð: 199-999575

1. Inngangur

This manual provides detailed instructions for the installation, operation, and maintenance of your AMD Wraith Max Cooler with RGB LED Fan. This high-performance CPU cooler is designed to efficiently dissipate heat from your processor, ensuring stable and optimal system performance. Please read this manual thoroughly before installation and use.

AMD Wraith Max Cooler with RGB LED fan, top-down view showing the fan and red LED ring.

Image 1.1: The AMD Wraith Max Cooler, featuring a black fan with an illuminated red RGB LED ring and a heatsink base with copper heat pipes.

2. Öryggisupplýsingar

  • Aftengdu alltaf rafmagnið frá tölvunni áður en þú setur upp eða fjarlægir nokkra íhluti.
  • Handle the cooler and CPU with care to avoid damage to pins or components.
  • Ensure proper grounding to prevent electrostatic discharge (ESD).
  • Geymið þar sem börn ná ekki til.
  • Do not operate the cooler if the fan blades are obstructed or damaged.

3. Innihald pakka

Gakktu úr skugga um að allir hlutir séu til staðar í pakkanum þínum:

  • AMD Wraith Max CPU Cooler with pre-applied thermal paste (or a small tube of thermal compound).
  • RGB LED connection cable (may vary by version, e.g., 4-pin or 5-pin).
  • Mounting brackets (if not pre-attached or integrated with the cooler). Note: Some versions may require existing motherboard mounting hardware.

4. Tæknilýsing

EiginleikiSmáatriði
VörumerkiAMD
Gerðarnúmer199-999575
Vörumál (L x B x H)3.15" L x 2.36" B x 3.15" H
Afl tengitegund4-pinna
Voltage12 volt
Hvaðtage140 vött
KæliaðferðLoft
Samhæf tækiDesktop (AMD AM4 platform compatible)
Hávaðastig38 desibel
EfniMálmur, plast
Þyngd hlutar1.2 pund
GTIN / UPC730143308779

5. Uppsetning og uppsetning

Follow these steps carefully to install your AMD Wraith Max Cooler. It is recommended to install the cooler with the motherboard removed from the PC case for easier access, especially if you are not experienced with CPU cooler installations.

  1. Undirbúið móðurborðið: Ensure your motherboard has the standard AMD AM4 retention bracket installed. If not, install the appropriate backplate and retention clips according to your motherboard's manual.
  2. Clean CPU Surface: If replacing an old cooler, carefully clean any old thermal paste from the CPU's integrated heat spreader (IHS) using isopropyl alcohol and a lint-free cloth.
  3. Berið á hitalíma: The Wraith Max Cooler often comes with pre-applied thermal paste. If not, apply a small pea-sized amount of thermal paste to the center of the CPU's IHS. Do not spread it manually; the pressure from the cooler will spread it evenly.
  4. Staðsetja kælinn: Carefully align the cooler over the CPU, ensuring the mounting clips on the cooler align with the retention bracket tabs on the motherboard.
  5. Festið kælinn:
    • Hook the non-lever side of the cooler's mounting clip onto the corresponding tab of the motherboard retention bracket.
    • While applying gentle, even pressure, push down the lever on the opposite side of the cooler until it locks onto the second tab of the retention bracket. This step may require firm pressure.
  6. Tengdu viftuaflið: Connect the 4-pin fan cable from the cooler to the "CPU_FAN" header on your motherboard.
  7. Connect RGB Cable: Connect the RGB LED cable from the cooler to the appropriate RGB header on your motherboard (e.g., 4-pin 12V RGB header). Refer to your motherboard manual for the correct header location and type.
Hlið view of the AMD Wraith Max Cooler, showing the heatsink fins and copper heat pipes extending from the base.

Mynd 5.1: Nánari mynd view of the AMD Wraith Max Cooler's heatsink and heat pipes, crucial for efficient heat transfer.

6. Notkunarleiðbeiningar

Once installed, the AMD Wraith Max Cooler operates automatically, adjusting fan speed based on CPU temperature. The RGB LED lighting can be controlled via your motherboard's RGB software.

  • Aðgerð aðdáenda: The fan speed is controlled by the motherboard's BIOS/UEFI settings or operating system software, typically based on CPU temperature. Ensure the fan is spinning freely after system startup.
  • RGB lýsingarstýring:
    • Install the RGB control software provided by your motherboard manufacturer (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).
    • Use the software to customize the color, effects, and brightness of the RGB LEDs on your Wraith Max Cooler.
    • If your motherboard lacks an RGB header or compatible software, the cooler may default to a specific color (e.g., red) or remain unlit, depending on the specific cooler version.

7. Viðhald

Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your cooler.

  • Rykhreinsun: Periodically (every 3-6 months, or more often in dusty environments) use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan does not spin rapidly during cleaning to prevent damage to the bearings.
  • Hitapasta: Thermal paste typically lasts for several years. If you notice increased CPU temperatures, consider reapplying fresh thermal paste. This involves carefully removing the cooler, cleaning old paste from both the CPU and cooler base, and applying new paste before reinstallation.
  • Viftuskoðun: Check the fan for any signs of damage, unusual noises, or obstructions. Replace the cooler if the fan is damaged or malfunctioning.

8. Bilanagreining

  • Hátt hitastig örgjörva:
    • Gakktu úr skugga um að kælirinn sé örugglega festur og að hann hafi góða snertingu við örgjörvann.
    • Verify that the fan is spinning. If not, check the fan power connection to the motherboard.
    • Check if thermal paste was applied correctly or needs reapplication.
    • Clean any dust buildup from the heatsink fins.
    • Tryggið nægilegt loftflæði í tölvukassanum.
  • Viftan snýst ekki:
    • Check the 4-pin fan cable connection to the "CPU_FAN" header on the motherboard.
    • Verify fan settings in the motherboard's BIOS/UEFI.
    • Gakktu úr skugga um að viftublöðin séu ekki hindruð.
  • RGB Lights Not Working/Incorrect Color:
    • Check the RGB LED cable connection to the motherboard's RGB header. Ensure it's connected to the correct type of header (e.g., 12V GRB for 4-pin).
    • Gakktu úr skugga um að RGB hugbúnaður móðurborðsins sé rétt uppsettur og stilltur.
    • Ensure the RGB cable is fully seated and not damaged.

9. Ábyrgð og stuðningur

Fyrir upplýsingar um ábyrgð og tæknilega aðstoð, vinsamlegast vísið til opinberu AMD websíðuna eða hafið samband við söluaðila. Geymið kaupkvittunina vegna ábyrgðarkröfu.

Fyrir frekari aðstoð, heimsækja AMD stuðningur websíða.