Behringer DI800 V2 Signal Direct Box Instruction Manual

1. Inngangur

The Behringer DI800 V2 is a professional 8-channel direct injection (DI) box designed to connect instruments or other audio sources directly to a mixing console or amplifier. It converts unbalanced, high-impedance signals into balanced, low-impedance signals, suitable for long cable runs without signal degradation. The DI800 V2 offers flexible power options, including mains power or phantom power from a mixing console, and features an ultra-flat frequency response for transparent audio reproduction.

2. Mikilvægar öryggisleiðbeiningar

• Lesið þessar leiðbeiningar vandlega áður en tækið er notað.
• Geymdu þessar leiðbeiningar til síðari viðmiðunar.
• Fylgdu öllum viðvörunum á vörunni og í handbókinni.
• Ekki nota þetta tæki nálægt vatni eða raka.
• Hreinsið aðeins með þurrum klút.
• Ekki loka neinum loftræstiopum. Setjið upp í samræmi við leiðbeiningar framleiðanda.
• Ekki setja upp nálægt neinum hitagjöfum eins og ofnum, hitatöflum, ofnum eða öðrum tækjum (þ. amplyftara) sem framleiða hita.
• Ekki brjóta niður öryggistilgang skautaðrar eða jarðtengdrar klöppu. Skautuð kló hefur tvö blöð þar sem annað er breiðara en hitt. Jarðtengi hefur tvö hníf og þriðja jarðtengi. Breiða blaðið eða þriðja tindurinn eru til öryggis. Ef meðfylgjandi kló passar ekki í innstungu þína skaltu hafa samband við rafvirkja til að skipta um úrelta innstungu.
• Verndaðu rafmagnssnúruna gegn því að ganga á hana eða klemma hana, sérstaklega við innstungur, innstungur og staðinn þar sem þau fara út úr tækinu.
• Notaðu aðeins viðhengi/aukahluti sem framleiðandi tilgreinir.
• Taktu þetta tæki úr sambandi í eldingum eða þegar það er ónotað í langan tíma.
• Látið alla þjónustu til hæfs þjónustufólks. Þjónusta er nauðsynleg þegar tækið hefur skemmst á einhvern hátt, svo sem að rafmagnssnúra eða kló er skemmd, vökvi hefur hellst niður eða hlutir hafa fallið inn í tækið, tækið hefur orðið fyrir rigningu eða raka, virkar ekki eðlilega , eða hefur verið fellt niður.

3. Upptaka og frumskoðun

Upon receiving your Behringer DI800 V2, carefully unpack the unit and inspect it for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately. The package should contain the DI800 V2 unit and a power cable. Ensure all components are present before proceeding with setup.

4. Uppsetning

4.1 Framhlið yfirview

Mynd 1: Front panel of the Behringer DI800 V2. Each of the 8 channels features an input jack, a link output, a -20dB pad switch, and a ground lift switch. LED indicators show signal presence and phantom power status.

• INPUT (1-8): 1/4" TS/TRS input jacks for connecting instruments or line-level sources.
• LINK (1-8): 1/4" TS/TRS output jacks for connecting the input signal to an amplifier or monitor. This output is parallel to the input.
• -20dB PAD (1-8): Attenuates the input signal by 20dB. Use this for high-output sources to prevent clipping.
• GROUND LIFT (1-8): Disconnects the ground connection between the input and output, which can help eliminate hum or ground loops.
• POWER rofi: Kveikir eða slekkur á tækinu.
• PHANTOM POWER LED: Illuminates when phantom power is detected on an XLR output.
• SIGNAL LED: Lýsir þegar inntaksmerki er til staðar.

4.2 Bakhlið yfirview

Mynd 2: Rear panel of the Behringer DI800 V2. It features eight balanced XLR outputs and the AC power input.

• BAL OUT (1-8): Balanced XLR outputs for connecting to a mixing console's microphone inputs.
• AC INNGANGUR: Staðlað IEC rafmagnstengi fyrir tengingu við meðfylgjandi rafmagnssnúru.

4.3 Að knýja tækið

The DI800 V2 can be powered in two ways:

1. Rafmagn: Connect the supplied AC power cable to the AC INPUT on the rear panel and then to a suitable wall outlet.
2. Phantom Power: The unit can also be powered by 48V phantom power supplied from a mixing console via the XLR outputs. If phantom power is present on at least one XLR output, the unit will power on automatically. The PHANTOM POWER LED on the front panel will illuminate.

Athugið: If both mains power and phantom power are connected, the unit will prioritize mains power. It is recommended to use mains power for consistent operation, especially if phantom power sources are unreliable or vary.

4.4 Tengingar

• Connect your instrument (e.g., guitar, bass, keyboard) to an INNSLAG jack on the front panel using a 1/4" TS or TRS cable.
• If you need to send the signal to an amplifier or monitor on stage, connect a 1/4" TS or TRS cable from the corresponding LINK jack til þín ampinntak lífeyrisspartara.
• Tengdu við BALL ÚT XLR output on the rear panel to a microphone input on your mixing console using a balanced XLR cable.

5. Notkunarleiðbeiningar

5.1 Merkjaflæði

The DI800 V2 takes an unbalanced, high-impedance signal from your instrument, converts it to a balanced, low-impedance signal, and sends it to your mixing console. The LINK output provides a direct, unprocessed copy of the input signal for local monitoring.

5.2 Using the -20dB Pad

If your instrument or audio source has a very high output level, the input signal to the DI800 V2 might be too strong, leading to distortion. In such cases, engage the -20dB PAD switch for the corresponding channel. This will reduce the input signal level by 20 decibels, preventing clipping and ensuring a clean signal to the mixing console.

5.3 Ground Lift Function

Ground loops can cause an audible hum or buzz in your audio system. The JARÐLYFTING switch disconnects the ground connection between the input and output stages of the DI800 V2. If you experience hum, try engaging the GROUND LIFT switch for the affected channel. This often resolves ground loop issues without affecting the audio signal.

5.4 Monitoring Signal Presence

The Merki LED for each channel illuminates when an audio signal is detected at the input. This provides a quick visual confirmation that your instrument is connected and sending a signal to the DI box.

6. Viðhald

• Þrif: Disconnect the unit from power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Geymsla: Store the DI800 V2 in a cool, dry place away from direct sunlight and extreme temperatures.
• Þjónusta: There are no user-serviceable parts inside the DI800 V2. Refer all servicing to qualified service personnel.

7. Bilanagreining

8. Tæknilýsing

9. Ábyrgð

For detailed warranty information, please refer to the official Behringer website or contact Music Tribe US support. The warranty typically covers manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

Lýsing á ábyrgð: Musictribe. Support.

10. Stuðningur

If you encounter issues not covered in this manual or require further assistance, please visit the official Behringer support website or contact Music Tribe US customer service. You can find contact details and additional resources on their official websíða.

Stuðningur á netinu: Music Tribe Support