1. Inngangur
Thank you for choosing the SENCOR SWS 4250 Weather Station. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read these instructions carefully before use and retain them for future reference.
2. Öryggisupplýsingar
- Ekki láta aðaleininguna eða skynjarann verða fyrir miklum hita, beinu sólarljósi eða raka.
- Use only the specified power adapter (DC 4.5V/150mA) for the main unit.
- Ensure correct battery polarity when inserting batteries into both the main unit and the sensor.
- Keep batteries out of reach of children. Do not mix old and new batteries or different types of batteries.
- Ekki reyna að taka tækið í sundur eða gera við það sjálfur. Látið hæft starfsfólk sjá um alla þjónustu.
3. Innihald pakka
- SENCOR SWS 4250 Main Unit
- Wireless Outdoor Sensor (SWS TH4250)
- DC 4.5V/150mA Power Adapter
- Notendahandbók
4. Vöru lokiðview
The SENCOR SWS 4250 Weather Station features a color LCD display for clear visibility of weather forecasts, indoor/outdoor temperature, humidity, time, and date. It supports up to three wireless outdoor sensors, with one included.
Image 1: SENCOR SWS 4250 Weather Station Main Unit and Wireless Sensor. The main unit features a color LCD display, while the compact outdoor sensor transmits data wirelessly.
5. Uppsetning
5.1. Uppsetning rafhlöðu
- Aðaleining: Open the battery compartment on the back. Insert 3 x 1.5V AAA batteries (not included), observing the correct polarity (+/-). Close the compartment.
- Útiskynjari: Open the battery compartment. Insert 2 x 1.5V AA batteries (not included), observing the correct polarity (+/-). Close the compartment.
5.2. Að knýja aðaleininguna
Connect the provided DC 4.5V/150mA power adapter to the main unit's power input and then plug it into a wall outlet. The display will illuminate.
5.3. Staðsetning skynjara og samstilling
Place the outdoor sensor in a shaded, dry location away from direct sunlight and rain, ensuring it is within 30 meters (open area) of the main unit. The main unit will automatically attempt to synchronize with the sensor. This may take a few minutes. Once connected, the outdoor temperature and humidity will appear on the display.
5.4. Uppsetningarvalkostir
- Borðplata: Use the integrated stand on the back of the main unit to place it on a flat surface.
- Veggfesting: Use the hanging hole on the back of the main unit to mount it on a wall using a screw (not included).
6. Notkunarleiðbeiningar
6.1. Birta upplýsingar
The color LCD display shows the following information:
- Weather forecast icons (sunny, partly cloudy, cloudy, rain)
- Hitastig og raki innanhúss
- Útihiti og raki
- Digital time (12/24 hour format)
- Dagsetning og vikudagur
6.2. Stillingar tíma og dagsetningar
The weather station automatically receives the DCF77 radio signal for accurate time and date synchronization. If the signal is not available or you prefer manual setting:
- Ýttu á og haltu inni SETJA button (location may vary, refer to device markings) to enter manual time/date setting mode.
- Notaðu UPP/NIÐUR hnappa til að stilla gildi.
- Ýttu á SETJA again to confirm and move to the next setting (e.g., hour, minute, year, month, day, 12/24 hour format).
6.3. Val á hitastigseiningu
Ýttu á ° C / ° F button (location may vary) to switch between Celsius and Fahrenheit temperature display.
6.4. Managing Additional Sensors
The SWS 4250 supports up to three outdoor sensors. To add additional sensors (purchased separately):
- Settu rafhlöður í nýja skynjarann.
- Á aðaleiningunni, ýttu á RÁS button to cycle through available sensor channels.
- The main unit will automatically search for and connect to new sensors on an unused channel.
7. Viðhald
7.1. Þrif
Þurrkið aðaleininguna og skynjarann með mjúkum klút.amp klút. Notið ekki slípiefni eða leysiefni, þar sem þau geta skemmt skjáinn eðaasing.
7.2. Skipt um rafhlöðu
Replace batteries in both the main unit and the sensor when the low battery indicator appears on the display. Always replace all batteries in a set with new ones of the same type.
7.3. Geymsla
If the device will not be used for an extended period, remove all batteries to prevent leakage and store the unit in a cool, dry place.
8. Bilanagreining
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Enginn skjár á aðaleiningunni | Batteries are dead or incorrectly inserted; power adapter not connected. | Check battery polarity and charge; ensure power adapter is securely connected. |
| Útihitastig/rakastig birtist ekki | Sensor batteries dead; sensor out of range; interference; sensor not synchronized. | Replace sensor batteries; move sensor closer to main unit; resynchronize sensor (remove and reinsert batteries in sensor, then main unit). |
| Rangur tími/dagsetning | DCF77 signal weak or unavailable; manual settings incorrect. | Move main unit to a location with better signal reception; set time/date manually. |
| Veðurspá röng | The forecast is based on atmospheric pressure changes and may not always match local conditions perfectly. | This is normal. The forecast is an estimation. |
9. Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Fyrirmynd | SWS 4250 |
| Vörumerki | SENCOR |
| Skjár Tegund | Litur LCD |
| Hitastig innanhúss | 0 °C til +50 °C |
| Útihitastig | -20 °C til +60 °C |
| Rakastigsbil (inni/úti) | 20% til 90% RH |
| Tímasnið | 12/24 klukkustunda valmöguleiki |
| Tímasamstilling | DCF77 Radio Controlled (Manual setting possible) |
| Wireless Sensor Support | Up to 3 sensors (1 SWS TH4250 included) |
| Sendingartíðni skynjara | 433 MHz |
| Sensor Transmission Range | Allt að 30 m (opið svæði) |
| Power Main Unit | 3 x 1.5V AAA batteries (not included) or DC 4.5V/150mA adapter (included) |
| Skynjarafl | 2 x 1.5V AA rafhlöður (fylgir ekki) |
| Stærð aðaleiningar (B x H x D) | 173 x 125 x 22 mm |
| Þyngd aðaleininga | 238 g |
| Litur | Svartur |
10. Ábyrgð og stuðningur
For warranty information and technical support, please refer to the documentation provided with your purchase or contact SENCOR customer service. Keep your proof of purchase for any warranty claims.