Bearware B081HCF7WR

Leiðbeiningarhandbók fyrir stafrænan hitastilli frá Bearware (gerð B081HCF7WR)

1. Inngangur

1.1 Vara lokiðview

The Bearware Digital Thermostat Plug is designed for temperature-controlled switching of heating and cooling appliances. It allows you to set a desired room temperature, and the device will automatically turn connected appliances on or off to maintain that temperature. This programmable thermostat is suitable for use with various electric heaters, air conditioners, and other temperature-sensitive devices.

1.2 Helstu eiginleikar

  • Hitastýring: Regulates temperature between 1°C and 45°C with an accuracy of ±0.5°C.
  • Stór LCD skjár: Features a clear 5 cm LCD for easy reading of time, temperature, and mode settings.
  • Forritanlegt: Offers flexible programming options for daily schedules and temperature settings.
  • Frostvörn: Automatically activates heating if the room temperature drops below 2°C to prevent freezing.
  • Tvöfaldur hamur: Supports both heating and cooling modes.
  • Auðveld aðgerð: Simple button interface for setting time, temperature, and programs.

1.3 Innihald pakka

  • Bearware Digital Thermostat Plug
  • Leiðbeiningarhandbók

2. Öryggisleiðbeiningar

Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or injury.

  • Þetta tæki er eingöngu til notkunar innandyra.
  • Ekki láta tækið verða fyrir raka, beinu sólarljósi eða miklum hita.
  • Ensure the device is properly plugged into a grounded outlet.
  • Ekki ofhlaða rafmagnsinnstungu.
  • Ekki taka tækið í sundur eða reyna að gera við það sjálfur. Hafðu samband við hæft starfsfólk til að fá þjónustu.
  • Geymið þar sem börn ná ekki til.
  • Taktu tækið úr sambandi við rafmagnsinnstunguna áður en það er hreinsað.

3. Vöruhlutir

Familiarize yourself with the components of your Bearware Digital Thermostat Plug:

Framan view of the Bearware Digital Thermostat Plug, showing the display and control buttons.

Mynd 1: Framan view of the Bearware Digital Thermostat Plug, showing the display and control buttons. The display shows current time, day, room temperature, and set temperature. Buttons include Power, Set, OK, Up, and Down.

  • LCD skjár: Shows current time, day, room temperature, set temperature, and operating mode icons.
  • Aflrofi (⏻): Kveikir eða slekkur á tækinu.
  • SET hnappur: Enters programming mode and confirms selections.
  • OK hnappur: Confirms settings during programming.
  • Örvarhnappur upp (▲): Eykur gildi eða ferð í gegnum valmyndir.
  • Örvarhnappur niður (▼): Minnkar gildi eða ferð í gegnum valmyndir.
  • Innbyggður tengill: For connecting your heating or cooling appliance.

4. Uppsetning og upphafsstilling

4.1 Upphafsvirkjun

  1. Plug the Bearware Digital Thermostat Plug into a standard wall outlet.
  2. The display will light up, and the device will be in standby mode or show default settings.

4.2 Stilla tíma og dag

To ensure accurate scheduling, set the current time and day:

Quick start guide diagram for the Bearware Digital Thermostat Plug, illustrating time setting, mode selection, and timer programming.

Mynd 2: Quick start guide diagram showing steps for time setting, heating/cooling mode selection, manual temperature setting, and timer programming.

  1. Ýttu á og haltu inni SETJA button for approximately 3 seconds until the clock symbol on the display starts blinking.
  2. Notaðu Uppör (▲) or Ör niður (▼) hnappana til að stilla mínúturnar. Ýttu á OK að staðfesta.
  3. The hour display will start blinking. Use the Uppör (▲) or Ör niður (▼) buttons to adjust the hours. Press OK að staðfesta.
  4. The day of the week will start blinking. Use the Uppör (▲) or Ör niður (▼) hnappana til að velja núverandi dag. Ýttu á OK að staðfesta.
  5. The device will automatically exit the time setting menu after a few seconds, or you can briefly press the Kraftur (⏻) hnappinn til að hætta.

5. Rekstraraðferðir

5.1 Heating and Cooling Mode Selection

The thermostat can operate in either heating or cooling mode. By default, the device is set to heating mode.

  1. Ýttu á og haltu inni Uppör (▲) button for approximately 3 seconds to enter the basic settings menu.
  2. Notaðu Uppör (▲) or Ör niður (▼) buttons to toggle between the heating mode (indicated by a HITI icon, typically a flame) and cooling mode (indicated by a SVALT icon, typically a snowflake).
  3. After 5 seconds of inactivity, the setting will be saved, and the device will return to the main display.
  4. In Upphitunarstilling, the connected appliance will turn on if the room temperature is below the set target temperature.
  5. In Kælistilling, the connected appliance will turn on if the room temperature is above the set target temperature.

5.2 Handvirk hitastýring

To set a specific target temperature manually:

  1. Ýttu stuttlega á SETJA button until the manual mode icon (a hand with an index finger) appears on the display.
  2. Notaðu Uppör (▲) or Ör niður (▼) hnappar til að stilla æskilegt hitastig.
  3. The connected heating or cooling appliance will switch on or off according to the selected mode and the newly set temperature.
  4. To exit manual mode, briefly press the SETJA hnappinn aftur.

5.3 Programmable Timer Mode (ON/OFF Times)

You can program specific ON and OFF times for your connected appliance:

  1. Ýttu á og haltu inni SETJA button for approximately 3 seconds to enter the time setting menu.
  2. Ýttu á SETJA button once briefly to activate the ON time setting. The 'ON' symbol will blink.
  3. Notaðu Uppör (▲) or Ör niður (▼) buttons to set the desired ON hour, then press OK.
  4. Notaðu Uppör (▲) or Ör niður (▼) buttons to set the desired ON minute, then press OK.
  5. Ýttu á SETJA button twice briefly to activate the OFF time setting. The 'OFF' symbol will blink.
  6. Notaðu Uppör (▲) or Ör niður (▼) buttons to set the desired OFF hour, then press OK.
  7. Notaðu Uppör (▲) or Ör niður (▼) buttons to set the desired OFF minute, then press OK.
  8. The device will automatically save the settings and exit the menu after a few seconds.

5.4 Frostvörn

The thermostat includes an anti-frost function to protect your space from freezing temperatures. If the room temperature drops below 2°C, the device will automatically activate the connected heating appliance to raise the temperature above the freezing point, preventing damage from cold.

6. Viðhald

6.1 Þrif

  1. Taktu tækið alltaf úr sambandi við rafmagnsinnstunguna áður en það er hreinsað.
  2. Wipe the exterior of the thermostat with a soft, dry cloth.
  3. Notið ekki slípiefni, leysiefni eða sterk efni, þar sem þau geta skemmt yfirborðið.
  4. Gætið þess að enginn vökvi komist inn í tækið.

6.2 Geymsla

If storing the device for an extended period, unplug it and store it in a cool, dry place away from direct sunlight and extreme temperatures.

7. Bilanagreining

If you encounter issues with your Bearware Digital Thermostat Plug, refer to the following common problems and solutions:

  • Enginn skjár:
    • Ensure the thermostat is securely plugged into a working power outlet.
    • Athugaðu hvort rafmagnsinnstungan sjálf virki með því að stinga í samband annað tæki.
  • Rangt hitastigsmælingar:
    • Ensure the thermostat is not placed near heat sources (e.g., direct sunlight, appliances) or cold drafts, which can affect its sensor.
    • Allow some time for the sensor to stabilize after initial plug-in or relocation.
  • Tækið kveikir/slokknar ekki:
    • Verify that the thermostat is in the correct operating mode (heating or cooling) for your appliance.
    • Check that the set target temperature is appropriate for the desired action (e.g., for heating, set temperature higher than room temperature).
    • Ensure the connected appliance is switched on and functioning correctly.
    • Review your programmed ON/OFF times if using timer mode.
  • Hnappar svara ekki:
    • Try unplugging the device from the wall outlet for a few seconds and then plugging it back in to reset it.

Ef vandamálið heldur áfram eftir að þessar lausnir hafa verið prófaðar, vinsamlegast hafið samband við þjónustuver.

8. Tæknilýsingar

Dimensional drawing of the Bearware Digital Thermostat Plug, illustrating its length, width, and depth.

Mynd 3: Dimensions of the Bearware Digital Thermostat Plug, showing measurements in millimeters.

  • Gerðarnúmer: B081HCF7WR
  • Aflgjafi: 200-240 V ~ AC / 50 Hz
  • Hámark Hlaða: 16 A
  • Stillanlegt hitastigssvið: 1°C - 45°C
  • Nákvæmni hitastigs: ±1°C (as per specifications, A+ content states ±0.5°C)
  • Hitaskynjari: NTC
  • Self-Consumption Power: 1.3 W
  • Inntak: 1x Type E plug
  • Framleiðsla: 1x Type F female socket
  • Gerð tengi: EU (Euro)
  • Skjár: 5 cm (2 inch) LCD
  • Mál (L x B x H): Um það bil 14 x 3 x 8 cm
  • Þyngd: Um það bil 246 g
  • Litur: Hvítur

9. Ábyrgð og stuðningur

Fyrir upplýsingar um ábyrgð eða tæknilega aðstoð, vinsamlegast skoðið umbúðir vörunnar eða hafið samband beint við framleiðandann. Geymið kaupkvittunina sem sönnun fyrir kaupunum.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.