MEMBER'S MARK Infrared Tower Heater

Notendahandbók fyrir MEMBER'S MARK 23 tommu innrauða turnhitara

Model: Infrared Tower Heater

1. Mikilvægar öryggisleiðbeiningar

Please read and understand all safety information before using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury. Keep this manual for future reference.

  • Aðeins innanhússnotkun: This heater is designed for indoor use in residential living spaces. Do not use outdoors.
  • Rafmagnsöryggi: Always plug the heater directly into a wall outlet. Never use with an extension cord, power strip, or surge protector. Ensure the outlet is rated for the heater's power requirements.
  • Staðsetning: Place the heater on a firm, level surface. Maintain a minimum clearance of 3 feet (0.9 meters) from walls, furniture, curtains, bedding, and other combustible materials. Do not block air intakes or exhaust openings.
  • Eftirlit: Close supervision is necessary when the heater is used by or near children or individuals with reduced physical, sensory, or mental capabilities.
  • Ekki hylja: Hyljið aldrei hitara eða lokaðu loftræstingaropum hans, þar sem það getur valdið ofhitnun og eldsvoða.
  • Blautir staðir: Ekki nota hitarann ​​á baðherbergjum, þvottahúsum eða svipuðum stöðumamp staðsetningar. Settu hitarann ​​aldrei þar sem hann gæti fallið í baðkar eða önnur vatnsílát.
  • Öryggi við veltu: This heater is equipped with a tip-over safety switch that automatically shuts off the unit if it is accidentally knocked over. If this occurs, place the heater upright on a stable surface, and it will resume operation.
  • Svalt að snerta: While the exterior is designed to be cool to the touch, the heating elements inside become very hot. Avoid touching the heating elements.
  • Rafmagnssnúra: Ekki setja rafmagnssnúruna undir teppi eða hylja hana með gólfmottum, hlaupum eða álíka áklæði. Settu snúruna í burtu frá umferðarsvæðum þar sem henni verður ekki hrasað.
Member's Mark Infrared Tower Heater packaging showing key features like 3 adjustable heat settings and tip-over safety sensor.

Figure 1: Product packaging highlighting key features including the Tip-Over Safety Sensor.

2. Vöru lokiðview

The MEMBER'S MARK 23-inch Infrared Tower Heater provides supplemental heat for indoor living spaces. It features three infrared quartz tubes that generate gentle, even heat without drying out the room's air. The oscillating front panel louvers ensure a wider distribution of warmth. This heater includes 3 adjustable heat settings, an adjustable digital thermostat, and an electronic timer function. A remote control is provided for convenience.

Framan view of the Member's Mark 23-inch Infrared Tower Heater with its digital display showing 70 degrees Fahrenheit.

Mynd 2: Framan view of the Infrared Tower Heater, showcasinstafrænn skjár og glæsileg hönnun.

3. Uppsetning

  1. Upptaka: Carefully remove the heater from its packaging. Retain packaging materials for future storage or transport.
  2. Staðsetning: Place the heater on a stable, level, and heat-resistant surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, or other objects. Do not place it on carpeting or rugs that may obstruct airflow.
  3. Rafmagnstenging: Locate the power cord at the back of the unit. Ensure the main power switch (located on the back) is in the 'OFF' position. Plug the power cord directly into a grounded 120V AC wall outlet.
  4. Rafhlöður í fjarstýringu: The remote control requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, observing the correct polarity (+/-).
Til baka view of the Member's Mark Infrared Tower Heater showing the power cord and the main power switch.

Mynd 3: Aftan view of the heater, illustrating the power cord and the main power switch.

Member's Mark Infrared Tower Heater placed in a living room setting on a rug, next to a sofa.

Figure 4: Heater positioned in a room, demonstrating appropriate placement away from furniture.

4. Notkunarleiðbeiningar

Hægt er að stjórna hitaranum með stjórnborðinu á tækinu eða með fjarstýringunni sem fylgir.

Stjórnborð

Close-up of the digital control panel on the Member's Mark Infrared Tower Heater, showing buttons for power, temperature, timer, and oscillation.

Mynd 5: Ítarleg view of the heater's digital control panel.

  • Aðalrofa: Gakktu úr skugga um að aðalrofinn aftan á tækinu sé í „ON“ stöðu.
  • Aflhnappur (U): Press to turn the heater ON or OFF. The digital display will illuminate when ON.
  • Hitastilling (^/v): Use the Up (^) and Down (v) arrows to set your desired temperature. The temperature range is typically between 50°F (10°C) and 90°F (32°C).
  • Heat Settings (Mode/Fan): Press the 'Mode' or 'Fan' button to cycle through the 3 available heat settings (e.g., Low, High, Eco). The display will indicate the current setting.
  • Timer Function (Klukkutákn): Press the 'Timer' button to activate the auto shut-off timer. Each press increases the timer by one hour, up to a maximum of 12 hours. The heater will automatically turn off after the set time.
  • Oscillation (Sveiflutákn): Press the 'Oscillation' button to start or stop the internal louvers from oscillating, distributing heat more widely.

Fjarstýring

Close-up of the remote control for the Member's Mark Infrared Tower Heater, showing buttons for power, temperature, time, and oscillation.

Figure 6: Remote control for convenient operation of the heater.

The remote control duplicates the functions of the control panel. Point the remote control directly at the heater's display panel for optimal response.

  • ON/OFF: Kveikir eða slekkur á hitaranum.
  • HITI UPP/NIÐUR: Stillir æskilegt hitastig.
  • HI/LO/ECO: Cycles through heat settings.
  • TÍMI: Stillir sjálfvirka slökkvunartíma.
  • OSC: Activates or deactivates oscillation.

5. Viðhald

Reglulegt viðhald tryggir bestu mögulegu virkni og endingu hitara þíns.

  • Þrif: Before cleaning, always turn off the heater, unplug it from the wall outlet, and allow it to cool completely. Use a soft, damp klút til að þurrka ytra byrði. Notið ekki slípiefni eða leysiefni. Gætið þess að vatn komist ekki inn í hitarann.
  • Air Intake/Filter: Periodically check the air intake vents at the back of the heater for dust and debris. Use a vacuum cleaner with a brush attachment to gently clean these areas.
  • Geymsla: Þegar hitarinn er ekki í notkun skal geyma hann á köldum og þurrum stað. Mælt er með að geyma hann í upprunalegum umbúðum til að vernda hann fyrir ryki og skemmdum.

6. Bilanagreining

Ef þú lendir í vandræðum með hitaranum þínum skaltu skoða eftirfarandi algeng vandamál og lausnir:

VandamálMöguleg orsökLausn
Hitari kviknar ekki.
  • Rafmagnssnúra ekki vel tengd.
  • Aðalrofa er SLÖKKT.
  • Enginn straumur í innstungunni.
  • Veltihnappur virkjaður.
  • Ofhitavörn virkjuð.
  • Ensure cord is firmly plugged into a grounded outlet.
  • Turn the main power switch on the back to 'ON'.
  • Athugaðu rofann á heimilinu eða prófaðu aðra innstungu.
  • Place heater upright on a flat, stable surface.
  • Unplug the heater, wait 10 minutes for it to cool, then plug back in.
Hitari gefur frá sér engan hita.
  • Stilling hitastigs er of lág.
  • Heat setting is on 'Fan Only' or 'Eco' mode.
  • Hækkið æskilegt hitastig.
  • Cycle through heat settings to 'Low' or 'High'.
Fjarstýring virkar ekki.
  • Rafhlöður eru tómar eða rangt settar í.
  • Hindrun milli fjarstýringar og hitara.
  • Skiptu um rafhlöður (2 AAA) og gætið þess að þær séu rétt pólaðar.
  • Fjarlægið alla hluti sem loka fyrir merkjaleiðina.

Ef vandamálið er enn til staðar eftir að þessar lausnir hafa verið prófaðar skaltu hafa samband við þjónustuver.

7. Tæknilýsing

EiginleikiSmáatriði
VörumerkiMEÐLIMSMERKI
FyrirmyndInnrautt turnhitari
ASINB084YVXJGL
Mál (L x B x H)10.5 x 9.5 x 23.25 tommur (26.67 x 24.13 x 59.06 cm)
Þyngd23 lbs (10.43 kg)
UpphitunarsvæðiAllt að 1000 fm
Hitastillingar3 (Low, High, Eco)
Sérstakir eiginleikarDigital Thermostat, Timer Function, Remote Control, Oscillation, Cool-to-Touch Exterior, Tip-Over Safety Switch
HitaefniInfrared Quartz Tubes
LiturBrúnn

8. Ábyrgð og stuðningur

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.

For further assistance or inquiries, please visit the MEMBER'S MARK official websíðuna eða hafðu samband við þjónustudeild þeirra.

© 2025 MEÐLIMSMARK. Allur réttur áskilinn.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.