ECTY 1162

Notendahandbók fyrir ECTY LED litabreytandi reipljós

Model: 1162 | Brand: ECTY

Vara lokiðview

The ECTY LED Color Changing Rope Light is a versatile lighting solution designed for both indoor and outdoor use. This 18-foot rope light features 180 multicolor LEDs, offering a vibrant array of lighting options. It comes equipped with a remote control for convenient adjustment of its 8 distinct color settings and various animation modes.

  • 180 multicolor LED lights for dynamic illumination.
  • 8 distinct color settings to suit any mood or occasion.
  • Convenient remote control included for easy operation.

Innihald pakka

Vinsamlegast gangið úr skugga um að allir hlutir séu til staðar áður en haldið er áfram með uppsetningu:

  • 1 x 18 ft LED Rope Light
  • 1 x Remote Control (CR2025 Battery Included)
  • 1 x 2 feta rafmagnssnúra
  • 16 x Mounting Clips and Screws
  • 1 x leiðbeiningarhandbók

Uppsetningarleiðbeiningar

Follow these steps to set up your ECTY LED Color Changing Rope Light:

  1. Unpack the Rope Light: Carefully remove the rope light and all accessories from the packaging.
  2. Uncoil Completely: Before plugging in, fully uncoil the rope light to prevent overheating and ensure proper operation.
  3. Veldu staðsetningu: Select a suitable location for installation. While rated for indoor/outdoor use, ensure the environment is within the specified temperature range (greater than -18°C / 0°F).
  4. Festing (valfrjálst): Use the provided mounting clips and screws to secure the rope light in your desired position. Ensure the light is securely fastened to prevent accidental falls.
  5. Tengdu rafmagn: Connect the 2 ft power cord to the rope light and then plug it into a standard 120V/60Hz electrical receptacle.
ECTY LED Color Changing Rope Light in its packaging, showing the coiled light and remote control.

This image displays the ECTY LED Color Changing Rope Light, coiled within its retail packaging. The remote control is also visible, highlighting the product's key features.

Notkunarleiðbeiningar

Your ECTY LED Rope Light is controlled by the included remote. Ensure the remote's battery (CR2025) is properly installed.

Aðgerðir fjarstýringar:

  • Kveikt/slökkt: Notaðu Kraftur hnappinn til að kveikja eða slökkva á ljósunum.
  • Litaval: Press the colored buttons (Red, Green, Blue, White, Yellow, Cyan, Purple, Orange) to select a solid color.
  • Birtustilling: Notaðu Birtustig upp/niður hnappar til að auka eða minnka ljósstyrkinn.
  • Animation Modes: Cycle through various pre-programmed animation modes (e.g., Flash, Strobe, Fade, Smooth) using the dedicated mode buttons.
  • Hraðastýring: Adjust the speed of animation modes using the Hraði upp/niður hnappa.
Back of the ECTY LED Color Changing Rope Light packaging, showing product contents and warnings.

The back of the product packaging is shown, detailing the contents including the 18ft rope light, power cord, mounting clips, screws, and remote control. Important safety warnings and electrical specifications are also listed.

Viðhald

To ensure the longevity and optimal performance of your rope light, follow these maintenance guidelines:

  • Þrif: Gently wipe the rope light with a soft, damp cloth to remove dust or dirt. Do not use harsh chemicals or abrasive cleaners. Ensure the light is unplugged before cleaning.
  • Geymsla: When not in use for extended periods, coil the rope light neatly and store it in a cool, dry place away from direct sunlight and extreme temperatures.
  • Skoðun: Periodically inspect the rope light and power cord for any signs of damage, such as cuts, fraying, or exposed wires. Discontinue use if any damage is found.

Úrræðaleit

If you encounter issues with your ECTY LED Color Changing Rope Light, refer to the following common solutions:

VandamálMöguleg orsök/lausn
Ljós kvikna ekki.
  • Gakktu úr skugga um að rafmagnssnúran sé tryggilega tengd í virka innstungu.
  • Check if the remote control battery (CR2025) needs replacement.
  • Verify the power button on the remote has been pressed.
Fjarstýringin svarar ekki.
  • Point the remote directly at the sensor on the rope light's power unit.
  • Skiptu um CR2025 rafhlöðu í fjarstýringunni.
  • Ensure there are no obstructions between the remote and the sensor.
Sum LED ljós lýsa ekki upp.
  • This may indicate internal damage. Discontinue use and contact customer support.

Tæknilýsing

EiginleikiSmáatriði
Gerðarnúmer1162
VörumerkiECTY
Ljós TegundLED reipi ljós
Lengd18 fet (5.48 m)
Fjöldi LED180
Litastillingar8 (Multicolor)
AflgjafiRafmagn með snúru
Voltage120V / 60Hz
Hvaðtage18 vött
Gerð stjórnandaFjarstýring
Ytri rafhlaðaCR2025 (innifalið)
Inni/úti notkunInnandyra
EfniPlast
Þyngd hlutar1.83 pund
Vörumál4 x 9 x 8 tommur
UPC840072812206

Note: This device is not intended for use with emergency exits. For use in environments greater than -18°C / 0°F.

Ábyrgð og stuðningur

This ECTY LED Color Changing Rope Light comes with a 1 ára takmörkuð ábyrgð frá kaupdegi. Þessi ábyrgð nær yfir framleiðslugalla og vinnugalla við eðlilega notkun.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ECTY customer support. Refer to the product packaging or the manufacturer's websíðu fyrir nýjustu tengiliðaupplýsingar.

Mikilvægar öryggisupplýsingar:

  • Hætta á raflosti: Slökktu á rafmagni fyrir skoðun, uppsetningu eða fjarlægingu.
  • Ekki opna - engir hlutar sem notandi getur gert við inni.
  • Button Battery Warning: Þessi vara inniheldur hnapparafhlöðu. Ef það er gleypt getur það valdið alvarlegum meiðslum eða dauða á aðeins 2 klukkustundum. Leitaðu tafarlaust til læknis.

© 2024 ECTY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.