LiNKFOR XUNVC191

LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3 Instruction Manual

Model: XUNVC191

Inngangur

This manual provides detailed instructions for the installation, operation, and maintenance of your LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3. This device allows you to split a single digital optical audio source to three output devices simultaneously, enhancing your audio setup flexibility. Please read this manual thoroughly before use to ensure proper functionality and safety.

Innihald pakka

Vinsamlegast staðfestu að allir hlutir sem taldir eru upp hér að neðan séu innifaldir í pakkanum þínum:

  • 1x LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3
  • 1x Optical Cable (1 meter)
  • 1x USB rafmagnskapall
  • 1x Notendahandbók
Package contents including the splitter, optical cable, USB cable, and manual
Figure 1: Contents of the LiNKFOR Digital Audio Splitter package. Shown are the splitter unit, a 1-meter optical cable, a USB power cable, and the user manual.

Eiginleikar vöru

  • 1x3 Optical Audio Splitter: Divides one digital optical Toslink source to three output devices.
  • Stutt hljóðsnið: Compatible with LPCM2.0, DTS, and Dolby-AC3. Note: Does not support 7.1CH Dolby Digital Plus / Dolby TrueHD.
  • Lossless & Long-Distance Transmission: Supports signal transmission up to 25 meters (82 feet) with minimal signal loss (<0.2dB/m) via fiber optic cable.
  • Hönnun gegn truflunum: Álblöndu casing ensures good anti-interference performance and heat dissipation.
  • LED vísir: Provides clear operational status.
  • Yfirvoltage vernd: Prevents damage to the splitter.
  • Breið samhæfni: Works with PS3, STB, Xbox, DVD players, Blu-ray players, HDTVs, and power amplífskraftar.

Vara lokiðview

Familiarize yourself with the ports and indicators on your LiNKFOR Digital Audio Splitter.

Diagram of the LiNKFOR Digital Audio Splitter showing Micro USB power input, DC 5V input, Toslink IN port, LED indicator, and three Toslink OUT ports (OUT1, OUT2, OUT3).
Figure 2: Front and rear panel view of the splitter, highlighting the Micro USB power input, DC 5V power input, Toslink input, LED status indicator, and three Toslink output ports.
  • Micro USB / DC 5V: Rafinntakstengi.
  • LED: Power/Status indicator.
  • IN: Toslink optical audio input port.
  • OUT1, OUT2, OUT3: Toslink optical audio output ports.

Uppsetningarleiðbeiningar

Follow these steps to connect your LiNKFOR Digital Audio Splitter:

  1. Tengdu upprunann: Use a Toslink optical cable to connect your digital audio source (e.g., TV, PS3, Xbox, Blu-ray player) to the IN tengi á splitternum.
  2. Tengdu úttakstæki: Use up to three Toslink optical cables to connect your audio receiving devices (e.g., soundbar, amplifier, headphones with optical input, Bluetooth optical transmitter, DAC audio converter) to the OUT1, OUT2, og OUT3 ports on the splitter.
  3. Kveikt á: Tengdu meðfylgjandi USB-rafmagnssnúru við DC 5V or Ör USB port on the splitter and then to a 5V USB power adapter (not included) or a USB port on your source device. The LED indicator will illuminate when power is supplied.
  4. Staðfestu tengingu: Ensure all cables are securely connected. Power on all connected devices.
Setup diagram showing a TV connected to the splitter, which then connects to a soundbar and a Bluetooth optical transmitter for headphones.
Mynd 3: Dæmiample setup demonstrating how to connect a TV to the splitter, and then distribute the audio signal to a soundbar and a Bluetooth optical transmitter for wireless headphones.
Diagram illustrating the splitter's ability to support three types of output devices: a soundbar/digital amplifier, an optical Bluetooth transmitter, and a DAC audio converter.
Figure 4: The splitter supports simultaneous output to three different types of audio devices, such as a soundbar, a Bluetooth optical transmitter for headphones, and a Digital-to-Analog Converter (DAC).

Notkunarleiðbeiningar

Once the splitter is set up, operation is straightforward:

  • Ensure all devices (source, splitter, and output devices) are powered on.
  • The splitter will automatically distribute the digital optical audio signal from the input source to all three connected output devices.
  • Adjust the volume on your individual output devices as needed.
  • The LED indicator on the splitter will remain lit, indicating proper power supply and operation.
Rekstrarlegur view of the splitter connected to a TV, soundbar, and a headphone charging dock with optical input.
Figure 5: The splitter in operation, allowing audio from the TV to be simultaneously played through a soundbar and a pair of headphones connected via an optical input dock.

Viðhald

To ensure the longevity and optimal performance of your LiNKFOR Digital Audio Splitter, follow these maintenance guidelines:

  • Geymið tækið á köldum, þurrum stað, fjarri beinu sólarljósi, hitagjöfum og raka.
  • Þrífið tækið með mjúkum, þurrum klút. Notið ekki fljótandi hreinsiefni eða úðabrúsa.
  • Avoid placing heavy objects on top of the splitter.
  • Reynið ekki að opna eða gera við tækið sjálfur. Leitið til hæfs þjónustuaðila ef viðgerðir eru nauðsynlegar.
  • Þegar tækið er ekki í notkun í langan tíma skal aftengja straumbreytinn.

Úrræðaleit

If you encounter issues with your splitter, please refer to the following common problems and solutions:

VandamálMöguleg orsökLausn
No audio output from any device.
  • No power to the splitter.
  • Röng kapaltenging.
  • Source device not outputting optical audio.
  • Output device not configured correctly.
  • Ensure the USB power cable is connected and the LED is lit.
  • Check all Toslink cables are securely connected to the correct IN/OUT ports.
  • Verify your source device (TV, console) is set to output audio via Toslink/Optical.
  • Ensure your output devices (soundbar, amplifier) are set to receive audio from their optical input.
Audio output from some devices, but not others.
  • Faulty optical cable to specific output.
  • Output device not configured correctly.
  • Test the optical cable with another port or replace it.
  • Check the settings of the non-working output device.
Distorted or intermittent audio.
  • Damaged optical cable.
  • Unsupported audio format.
  • Laust samband.
  • Skiptu um ljósleiðara.
  • Ensure the audio format is LPCM2.0, DTS, or Dolby-AC3. 7.1CH Dolby Digital Plus / Dolby TrueHD are not supported.
  • Check all connections are firm.
LED-vísirinn er slökktur.
  • Engin aflgjafi.
  • Faulty power cable or adapter.
  • Ensure the USB power cable is connected to a working 5V power source.
  • Try a different USB power cable or adapter.

Tæknilýsing

EiginleikiSmáatriði
GerðarnúmerXUNVC191
Inntak1x Toslink Optical
Framleiðsla3x Toslink Optical
Stutt hljóðsniðLPCM2.0, DTS, Dolby-AC3
Hámarks sendingarfjarlægð25 meters / 82 feet (with optical cable loss <0.2dB/m)
AflgjafiDC 5V (í gegnum Micro USB)
Mál (L x B x H)61 x 57 x 16 mm
Þyngd140 grömm
HúsnæðisefniÁlblöndu
UpprunalandKína
Image of the LiNKFOR Digital Audio Splitter held in a hand, illustrating its compact size and dimensions of 61x57x16mm.
Figure 6: The compact dimensions of the LiNKFOR Digital Audio Splitter, measuring 61 x 57 x 16 mm, made from aluminum alloy.

Ábyrgð og stuðningur

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LiNKFOR websíða. Geymdu kaupkvittun þína fyrir ábyrgðarkröfur.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.