HUNSN RJ03

HUNSN RJ03 Micro Firewall Appliance User Manual

Model: RJ03

Inngangur

This manual provides detailed instructions for the setup, operation, and maintenance of your HUNSN RJ03 Micro Firewall Appliance. The RJ03 is a compact, fanless mini PC designed for network security applications, including use as a firewall, VPN router, or other network appliance. It features an Intel Celeron N5105 processor and multiple 2.5GbE LAN ports.

Vinsamlegast lesið þessa handbók vandlega áður en tækið er notað til að tryggja rétta uppsetningu og bestu mögulegu virkni.

Öryggisupplýsingar

  • Ensure the device is placed on a stable, flat surface with adequate ventilation.
  • Use only the provided power supply. Using an incorrect power supply may damage the device and void the warranty.
  • Ekki láta tækið verða fyrir vatni, raka eða miklum hita.
  • Avoid opening the chassis unless performing authorized upgrades (RAM, SSD/HDD, WiFi module). Disconnecting internal components improperly can cause damage.
  • In case of malfunction, disconnect the power supply and contact support. Do not attempt repairs yourself.

Innihald pakka

Gakktu úr skugga um að allir hlutir séu til staðar í pakkanum:

  • HUNSN RJ03 Firewall Appliance
  • Power Supply (DC12V3A)
  • Rafmagnssnúra
  • Ábyrgðarkort

Vara lokiðview

The HUNSN RJ03 is a compact, fanless mini PC designed for robust network applications. Its aluminum chassis acts as a heatsink, ensuring silent operation.

Framhlið

Framan view of HUNSN RJ03 Micro Firewall Appliance

Mynd 1: Skipulag framhliðarinnar

The front panel provides essential user interfaces:

  • Kveikt/slökkt hnappur: Notað til að kveikja eða slökkva á tækinu.
  • CLR CMOS hnappur: A small button to clear CMOS settings, often requiring a pin to press.
  • USB 3.0 tengi (2x): Til að tengja USB tæki við háhraða.
  • Type-C höfn: Supports display output and USB connectivity.
  • TF kortarauf: For TransFlash (MicroSD) memory cards.
  • Antenna Connectors (2x): For optional WiFi antennas.

Bakhlið

Aftan view of HUNSN RJ03 Micro Firewall Appliance with ports labeled

Mynd 2: Skipulag bakhliðar

The rear panel houses the primary connectivity options:

  • USB 2.0 tengi (2x): Til að tengja venjuleg USB tæki.
  • HDMI tengi: Til að tengjast við skjá.
  • DisplayPort (DP): Til að tengjast við skjá.
  • LAN Ports (4x 2.5GbE I226-V): Four 2.5 Gigabit Ethernet ports for network connections (ETH0, ETH1, ETH2, ETH3).
  • DC_IN Port: For connecting the 12V power adapter.

Uppsetningarleiðbeiningar

1. Hardware Installation (Optional)

If you purchased a barebones unit or wish to upgrade, follow these steps to install RAM, SSD/HDD, or a WiFi module. Ensure the device is powered off and disconnected from the power source before proceeding.

  1. Opnaðu undirvagninn: Carefully remove the screws securing the bottom panel of the appliance.
  2. Setja upp vinnsluminni: The device supports 2 x SODIMM DDR4 2933MHz, up to 32GB. Insert the RAM modules into the SODIMM slots, ensuring they are seated correctly and the clips lock them in place.
  3. Setja upp geymslu:
    • M.2 NVMe SSD: Insert the M.2 2280 PCIe 3.0 x1 NVMe SSD into its dedicated slot and secure it with the provided screw.
    • 2.5 Inch SATA SSD/HDD: Connect a 2.5-inch SATA SSD or HDD using the internal SATA data and power cables (if included). Secure the drive within the chassis.
  4. Install M.2 WiFi Module (Optional): If installing a WiFi 6 module, insert it into the M.2 WiFi slot and connect the antenna cables.
  5. Lokaðu undirvagninum: Replace the bottom panel and secure it with the screws.

2. Tengja jaðartæki

  1. Rafmagnstenging: Connect the provided power adapter to the DC_IN port on the rear panel, then plug the power cord into an electrical outlet.
  2. Nettenging: Connect your network cables to the 2.5GbE LAN ports (ETH0-ETH3) as required for your network configuration (e.g., WAN, LAN, DMZ).
  3. Display and Input (Optional): For initial setup or direct interaction, connect a monitor via HDMI or DisplayPort, and a keyboard/mouse to the USB ports.

3. Upphafleg ræsing

Press the Power ON/OFF button on the front panel. The device should power on. If a display is connected, you will see the boot sequence.

Uppsetning stýrikerfis

The HUNSN RJ03 supports a variety of operating systems and network appliance software. It supports UEFI boot only.

  • Samhæft kerfi: 5.10.x and above core-based FreeBSD router systems, Linux distributions, or Windows operating systems.
  • Firewall Software: Compatible with popular open-source solutions such as pfSense and OPNsense.
  • Uppsetningarferli:
    1. Prepare a bootable USB drive with your chosen operating system or firewall software.
    2. Connect the USB drive to a USB port on the RJ03.
    3. Power on the device and enter the BIOS/UEFI setup (usually by pressing DEL or F2 during boot) to configure the boot order, prioritizing the USB drive.
    4. Fylgdu leiðbeiningunum á skjánum til að setja upp stýrikerfið.
  • Network Driver Considerations: The Intel I226-V 2.5GbE LAN ports may require specific drivers or a newer kernel version for optimal performance, especially with certain older operating systems or firewall distributions (e.g., older pfSense versions). Ensure your chosen OS version supports these NICs or be prepared to install necessary drivers.

Rekstur

Once the operating system is installed and configured, the HUNSN RJ03 functions as a reliable network appliance. Specific operation details will depend on the software installed (e.g., OPNsense, pfSense).

  • Rafmagnsstjórnun: The device supports hardware auto power-on (enabled by default), network wake-up (Wake-on-LAN), and system power management features. These can typically be configured in the BIOS/UEFI settings.
  • Viftulaus hönnun: The fanless design ensures silent operation (0.00dB noise). The aluminum chassis acts as a large heatsink, dissipating heat efficiently.
  • Hitastjórnun: The device is designed to operate within a temperature range of 0°C to 70°C. While the chassis may feel warm to the touch, this is normal for fanless systems and indicates effective heat dissipation.

Viðhald

  • Þrif: Periodically clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation fins are free from dust accumulation to maintain optimal cooling.
  • Kæling: Although fanless, ensure the device has adequate airflow around its chassis. Avoid placing it in enclosed spaces without ventilation. If operating in consistently high ambient temperatures or under heavy load, consider adding an external USB fan for additional cooling, especially if system temperatures are a concern.
  • Uppfærsla vélbúnaðar: Check the HUNSN support website or contact customer service for any available BIOS/UEFI firmware updates, which may improve compatibility or performance.

Úrræðaleit

VandamálMöguleg orsökLausn
Ekki kveikir á tækinu.No power, faulty power supply, or internal connection issue.
  • Verify power cord and adapter are securely connected.
  • Test the power outlet.
  • Gakktu úr skugga um að rofinn sé alveg inni.
Engin skjáúttak.Incorrect display connection, monitor input, or BIOS settings.
  • Check HDMI/DisplayPort cable connections.
  • Ensure monitor is set to the correct input source.
  • Try connecting to a different display port (HDMI or DP).
  • Clear CMOS using the CLR CMOS button (refer to Product Overview).
Network interfaces (LAN ports) not working or slow.Missing or incorrect network drivers, incompatible OS kernel.
  • Ensure your operating system or firewall software has the correct drivers for Intel I226-V NICs.
  • Consider updating the OS kernel or using a newer version of your chosen software (e.g., pfSense 2.7 or OPNsense).
  • Staðfestið heilleika netsnúrunnar.
Device runs very warm.Normal operation for fanless design, or insufficient ventilation.
  • Tryggið nægilegt loftflæði í kringum tækið.
  • Avoid placing it in direct sunlight or confined spaces.
  • If consistently under heavy load, consider an external cooling fan.

Tæknilýsing

GerðarnúmerHUNSN RJ03
UndirvagnAluminum, Fanless Design
ÖrgjörviIntel Celeron N5105 (4M Cache, up to 2.90 GHz)
AES-NI SupportJá
Minni2 x SODIMM DDR4 2933MHz, max. 32GB (4GB installed in base model)
Geymsla1 x M.2 2280 PCIe 3.0 x1 NVMe SSD, 1 x 2.5 Inch SATA SSD/HDD (128GB SSD installed in base model)
Netkort4 x 2.5GbE Intel I226-V LAN
I/O tengiPower ON/OFF, CLR CMOS, 2 x USB 3.0, Type-C (Display/USB), TF Card Slot, 2 x USB 2.0, HDMI, DisplayPort, 4 x LAN, DC_IN
Stækkun1 x M.2 WiFi 6 slot
KrafturDC100-240V AC/50-60Hz input, 12V3A output
Rekstrarhitastig0°C ~ 70°C
Geymsluhitastig-20°C ~ 80°C
Hlutfallslegur raki10% ~ 90% óþéttandi
TDP10W
KælikerfiFanless, supports optional 12V 4-pin 8010 fan
Mál145.6 x 135.6 x 53.6 mm
Þyngd1.5 kg (u.þ.b.3.3 lbs)
KerfissamhæfiFreeBSD router systems (5.10.x+), Linux distros, Windows OS (UEFI support only)
Sérstakir eiginleikarHardware auto power on (default), network wake-up, system power management, temperature management

Ábyrgð og stuðningur

Your HUNSN RJ03 appliance comes with a warranty. Please refer to the included warranty card for specific terms and conditions. For technical support, troubleshooting assistance, or inquiries regarding parts and upgrades, please contact HUNSN customer service through the retailer where you purchased the product or visit the official HUNSN store online.

Fyrir frekari úrræði og upplýsingar um vörur, getur þú heimsótt HUNSN Store on Amazon.