JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Inngangur

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Innihald pakka

Vinsamlegast staðfestu að allir hlutir sem taldir eru upp hér að neðan séu innifaldir í pakkanum þínum:

  • JEYI M.2 NVMe SSD Enclosure
  • Hitapúðar
  • Skrúfjárn
  • USB-A to USB-C Cable (10Gbps)
  • USB-C to USB-C Cable (10Gbps)
  • Snúra
JEYI I9-Seal M.2 NVMe SSD Enclosure package contents
Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Uppsetningarleiðbeiningar

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

  1. Undirbúið girðinguna: Gently slide open the enclosure to reveal the internal PCB.
  2. Berið á hitapúða: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
  3. Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
  4. Tryggið SSD diskinn: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
  5. Lokaðu girðingunni: Carefully slide the enclosure cover back into place until it clicks securely.
Sprungið view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement
Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.
Diagram showing compatibility with M.2 2280 NVMe SSDs only
Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Notkunarleiðbeiningar

Once your NVMe SSD is securely installed, connect the enclosure to your device:

  1. Tengjast tæki: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
  2. Rafmagnsvísir: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
  3. Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
  4. Gagnaflutningur: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.
JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet
Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.
Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2
Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Viðhald

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

  • Hitastjórnun: Ál casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
  • Þrif: Notið mjúkan, þurran klút til að þrífa ytra byrði kassans. Forðist að nota fljótandi hreinsiefni eða leysiefni.
  • Geymsla: Þegar hylkið er ekki í notkun skal geyma það á köldum, þurrum stað fjarri beinu sólarljósi og miklum hita.
  • Kapalumhirða: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Úrræðaleit

VandamálMöguleg orsökLausn
Enclosure not detected by computer.
  • Laus kapaltenging.
  • SSD diskur ekki rétt uppsettur
  • SSD diskurinn ekki frumstilltur/formataður.
  • Bilaður USB tengi eða snúra.
  • Gakktu úr skugga um að snúrur séu tryggilega tengdar.
  • Re-open enclosure and verify SSD is seated correctly and screwed in.
  • Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD.
  • Prófaðu aðra USB tengi eða snúru.
Hægur gagnaflutningshraði.
  • Tengdur við hægari USB tengi (t.d. USB 2.0).
  • Thermal throttling due to high temperature.
  • Takmarkanir á afköstum SSD diska.
  • Connect to a USB 3.2 Gen 2 (10Gbps) compatible port.
  • Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot.
  • Verify your NVMe SSD's rated speed.
Enclosure gets very hot.
  • Normal operation during heavy data transfer.
  • Ineffective thermal pad contact.
  • This is expected as the aluminum casing dissipates heat.
  • Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Tæknilýsing

EiginleikiSmáatriði
FyrirmyndI9-Seal
VörumerkiJEYI
VélbúnaðarviðmótUSB 3.2 2. kynslóð (USB-C)
GagnaflutningshraðiAllt að 10 Gbps
Samhæf SSD gerðNVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor2280 (80mm) only
Hámarks geymslugeta4 TB
FlísasettJMS583 A3
EiginleikarUASP Support, TRIM Support, Win to Go (WTG) Support
EfniÁlblöndu
LiturSilfur
Vörumál4.06 x 1.02 x 0.39 tommur (103 x 26 x 10 mm)
Þyngd hlutar0.317 aura (9 grömm)
Samhæft stýrikerfiWindows, macOS, Linux, iOS, Android
Diagram of the JMS583 A3 master chip
Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Ábyrgð og stuðningur

For warranty information or technical support, please refer to the official JEYI webvefsíðu eða hafðu samband við þjónustuver þeirra beint. Upplýsingar um tiltekin ábyrgðartímabil og stuðningsleiðir eru venjulega að finna í kaupskjölunum þínum eða á framleiðandahandbókinni. websíða.

Framleiðandi: JEYI

Websíða: Visit the JEYI Store on Amazon

© 2025 JEYI. All rights reserved.