Delupet Dog Training Collar with Remote

Inngangur

The Delupet DT-68 Dog Training Collar is designed to assist in effective dog training through various corrective stimuli. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure safe and optimal use of the device.

Figure 1: Delupet DT-68 Dog Training Collar Remote and Receiver. The remote features a clear display and intuitive buttons for various training modes, while the collar receiver is compact and designed for comfort.

Helstu eiginleikar

• 4 þjálfunarstillingar: Beep, Vibration (1-9 levels), Shock (0-99 levels), and Shock Boost (10% higher).
• Lengri fjarstýringarsvið: Up to 2600 feet (approximately 800 meters) for effective outdoor training.
• Stillanlegur kraga: Fits dogs over 15 lbs with neck sizes 8-25 inches.
• IPX7 Vatnsheldur móttakari: Allows dogs to play in rain or swim with the collar on.
• Stuðningur við 4 rásir: One remote can control up to 4 receiver collars simultaneously.
• Öryggislyklaborðslás: Prevents accidental activation of commands.

Figure 2: Illustration of the four training modes: Vibrate, Beep, Shock, and Shock Boost. These modes offer varied levels of stimulation for different training needs.

Figure 3: The remote control offers an impressive 2600ft range, allowing for effective training even when your dog is at a distance.

Figure 4: The collar receiver is IPX7 waterproof, ensuring durability and functionality even when exposed to water during play or swimming.

Figure 5: The remote features a security keypad lock to prevent accidental activation of commands, ensuring safe handling.

Figure 6: The adjustable collar is suitable for a wide range of dog sizes, from 15 lbs up, with neck sizes between 8 and 25 inches.

Figure 7: The included 2-in-1 charging cable allows for convenient charging of both the remote and the collar receiver simultaneously.

Innifalið íhlutir

• 1 x Dog Training Collar Receiver
• 1 x fjarstýring
• 1 x 2-í-1 hleðslusnúra
• 1 x Leiðbeiningarhandbók (þetta skjal)
• Contact Points (short and long for different coat lengths)
• Silicone Protective Covers for Contact Points
• Prófa ljósverkfæri

Uppsetning

1. Hleðsla tækjanna

Before first use, fully charge both the collar receiver and the remote transmitter. Connect the 2-in-1 charging cable to a USB power source. The indicator lights will show charging status (e.g., red for charging, green for fully charged).

2. Að festa kragann

Ensure the collar fits snugly but comfortably around your dog's neck. You should be able to fit two fingers between the collar and your dog's neck. The contact points on the receiver should make direct contact with your dog's skin. Use the appropriate length contact points (short for thin hair, long for thick coats) and consider using the silicone protective covers for added comfort.

3. Að para fjarstýringuna og móttakarann

Typically, the remote and receiver come pre-paired. If re-pairing is needed, refer to the detailed instructions in the included paper manual. Ensure both devices are powered on during the pairing process.

Notkunarleiðbeiningar

1. Kveikja / slökkva á

To power on the receiver, press and hold the power button until the indicator light illuminates. To power off, press and hold the button until the light turns off. For the remote, slide the side switch to the 'ON' position to power on, and 'OFF' to power off.

2. Val á þjálfunarstillingum

The remote offers four training modes: Beep, Vibration, Shock, and Shock Boost. Use the dedicated buttons on the remote's front panel to activate the desired mode.

• Píphamur: Gefur frá sér heyranlegt hljóð.
• Titringsstilling: Gefur frá sér mildan titring.
• Shock Mode: Delivers a static correction.
• Höggdeyfing: Delivers a 10% higher static correction than the set Shock level.

3. Aðlögun styrkleikastiga

The Vibration mode has 9 adjustable levels, and the Shock mode has 99 adjustable levels. Use the '+' and '-' buttons on the side of the remote to increase or decrease the intensity for Vibration and Shock modes respectively. Start with the lowest effective level and gradually increase if necessary.

4. Rásarskipti

The remote supports up to 4 collars. Use the channel button on the side of the remote to switch between different collar channels if you are training multiple dogs.

5. Takkalás

To prevent accidental button presses, slide the lock switch on the side of the remote to the locked position. This will disable the command buttons until unlocked.

Viðhald

1. Þrif

Regularly clean the collar receiver and contact points with a damp cloth. Ensure the contact points are free of dirt or debris to maintain effective stimulation. Do not use harsh chemicals.

2. Umhirða rafhlöðu

Recharge the devices when the battery indicator shows low power. Avoid fully depleting the battery frequently to prolong its lifespan. Store the devices in a dry place when not in use.

3. Vatnshelding

While the receiver is IPX7 waterproof, ensure the charging port cover is securely closed before exposing it to water to prevent internal damage.

Úrræðaleit

• Kveikir ekki á tækinu: Gakktu úr skugga um að tæki séu fullhlaðin.
• No stimulation: Check collar fit, ensure contact points touch skin, verify battery levels, and confirm remote is on the correct channel. Use the test light tool to confirm shock functionality.
• Fjarstýring svarar ekki: Check remote battery, ensure it's powered on, and not in locked mode.
• Ósamræmi í frammistöðu: Re-pair the remote and receiver. Ensure no strong electromagnetic interference in the training area.

Tæknilýsing

Ábyrgð og stuðningur

For detailed warranty information and customer support, please refer to the official User Manual (PDF) provided with your product or visit the Delupet Store on Amazon. Multi-channel service including email, phone, and live chat support may be available as detailed in the user manual.

Notendahandbók (PDF): Sækja hér