UTRAI Jstar 5 Car Battery Jump Starter with Air Compressor User Manual

1. Inngangur

Thank you for choosing the UTRAI Jstar 5 Car Battery Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting for vehicles, inflate tires, and serve as a portable power bank and emergency light. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Öryggisupplýsingar

• Notið alltaf augnhlíf þegar unnið er með rafhlöður.
• Tryggðu nægilega loftræstingu meðan á notkun stendur.
• Do not smoke or allow sparks or flames near the battery or jump starter.
• Haltu tækinu fjarri börnum.
• Tengdu jumper clamps correctly: Red to positive (+), Black to negative (-). Incorrect connection can cause damage.
• Ekki reyna að ræsa frosna rafhlöðu með hraðræsi.
• Avoid prolonged use of the air compressor to prevent overheating. Allow it to cool down between uses.
• Ekki láta tækið verða fyrir rigningu eða miklum hita.

3. Innihald pakka

Gakktu úr skugga um að allir hlutir séu til staðar í pakkanum þínum:

• UTRAI Jstar 5 Jump Starter with Air Compressor
• Smart Jumper Clamps
• USB-C hleðslusnúra
• Rafmagns bílhleðslutæki millistykki
• Various Inflation Nozzles
• Notendahandbók
• EVA Protective Carrying Case

4. Vörueiginleikar

• Öflugur ræsir: 3500A peak current for 12V vehicles, capable of starting up to 8.0L gas and 8.0L diesel engines.
• Rafhlaða með mikla afkastagetu: 27000mAh internal battery for multiple jump starts and extended power bank use.
• Innbyggður loftþjöppu: 150 PSI maximum pressure with an inflation rate of 45 L/Min, suitable for various tires and inflatables.
• Fjölnota tæki: Combines jump starter, air compressor, portable power bank, and emergency LED light in one compact unit.
• 3 LED ljósstillingar: Features Normal, Flashing, and SOS modes for illumination and emergency signaling.
• Large LED Digital Screen: Provides clear display of battery status, tire pressure, and operational modes.
• Fjölhæf hleðslutengi: Includes QC3.0 USB Output (5V-2.4A), Type-C Input (5V-3A, 9V-2A), and EC5 Output.

5. Uppsetning

5.1 Upphafshleðsla

Before first use, fully charge the UTRAI Jstar 5. Connect the USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The LED screen will indicate the charging status. A full charge is recommended for optimal performance.

5.2 Skilningur á skjánum

The large LED digital screen displays important information:

• Rafhlöðustig: Indicates the remaining charge of the internal battery.
• Þrýstieiningar: Displays PSI, BAR, or KPA for the air compressor.
• Output/Input Status: Shows when USB or DC outputs are active, or Type-C input is charging.

6. Notkunarleiðbeiningar

6.1 Stökkræsing ökutækis

1. Gakktu úr skugga um að starthjálpin sé nægilega hlaðin.
2. Insert the smart jumper cable into the EC5 output port on the jump starter.
3. Tengdu rauða (+) clamp við jákvæða pól rafgeymis ökutækisins.
4. Tengdu svarta (-) clamp við neikvæða pól rafgeymis ökutækisins.
5. Once connected, the smart clamps will indicate readiness (e.g., a green light).
6. Ræstu bílvélina þína.
7. After the engine starts, immediately remove the smart clamps from the car battery, then disconnect the jumper cable from the jump starter.

6.2 Using the Air Compressor (Tire Inflator)

1. Locate the air hose stored on the back of the jump starter.
2. Screw the air hose connector onto the valve stem of the tire or inflatable item.
3. Turn on the jump starter. The screen will display the current pressure.
4. Press the 'M' button to cycle through different inflation modes (e.g., car, motorcycle, bicycle, ball) and select the appropriate one.
5. Notaðu '+' og '-' hnappana til að stilla tilætlaðan markþrýsting.
6. Press the 'OK' button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
7. Disconnect the air hose and store it back in the device.

6.3 Notkun sem flytjanlegur rafmagnsbanki

The UTRAI Jstar 5 can charge various electronic devices:

• Connect your device's USB charging cable to the USB Output port (QC3.0, 5V-2.4A) on the jump starter.
• For devices requiring a Type-C connection, use the Type-C input port for charging the jump starter itself, or if the device supports Type-C output from the jump starter (check device compatibility).
• The DC Output (12V-16V-10A) can power 12V accessories using the appropriate adapter.

6.4 Notkun LED vasaljóssins

The integrated LED light provides illumination and emergency signaling:

• Press the dedicated light button (often marked with a lightbulb icon) to turn on the light in Normal mode.
• Press the button again to cycle to Flashing mode.
• Ýttu í þriðja sinn fyrir SOS-stillingu.
• Ýttu fjórða sinn til að slökkva ljósið.

7. Viðhald

• Þrif: Þurrkið tækið með mjúkum, þurrum klút. Notið ekki sterk efni eða slípiefni.
• Geymsla: Store the UTRAI Jstar 5 in its protective carrying case in a cool, dry place, away from direct sunlight and moisture.
• Endurhleðsla: If the device is not used regularly, recharge it every 3-6 months to maintain battery health and prolong its lifespan.

8. Bilanagreining

9. Tæknilýsing

10. Ábyrgð og stuðningur

For warranty information, technical support, or any inquiries regarding your UTRAI Jstar 5, please refer to the warranty card included in your package or visit the official UTRAI webvefsíðu. Upplýsingar um þjónustuver eru venjulega að finna á framleiðandasíðunni. websíðuna eða í vöruskjölunum.