1. Inngangur
This instruction manual provides essential information for the proper installation, operation, and maintenance of your new DEUSES Carburetor. To ensure optimal performance and longevity, please read this manual thoroughly before attempting any installation or adjustment. This carburetor is designed as a replacement part for specific Lada models.
2. Vöru lokiðview
The DEUSES Carburetor (OEM 2105-1107010-20) is a high-performance engine component engineered for reliable fuel delivery. It features robust metal construction designed for durability and consistent operation. This unit is intended to directly replace the original equipment carburetor, aiming to restore or improve engine performance.
Helstu eiginleikar:
- Hágæða smíði fyrir endingu.
- Designed for direct replacement of original equipment.
- Aids in maintaining fuel efficiency while enhancing power output.
- Áreiðanlegt og auðvelt að setja upp.

Mynd 1: Ofan frá og niður view of the DEUSES Carburetor, showing the air intake and primary/secondary barrels.
3. Samhæfni
This carburetor is compatible with the following vehicle models and engine displacements. It is crucial to verify the OEM part number (2105-1107010-20) against your existing carburetor to ensure correct fitment.
- Lada 1200ccm
- Lada 1300ccm
- Lada Niva Base Sport Utility 2-Door 1.6L (1590CC, 97Cu. In. l4 GAS Naturally Aspirated) for model years 1988-1992.
- Lada 2101-2107 series.
Mikilvægt: Always cross-reference the part number 2105-1107010-20 with your vehicle's original equipment to confirm compatibility before installation.

Mynd 2: Hallandi framhlið view of the DEUSES Carburetor, showing various linkages and fuel inlet.
4. Uppsetning
Installation of a carburetor requires mechanical knowledge and appropriate tools. If you are not confident in your ability to perform this procedure, it is recommended to seek assistance from a qualified mechanic.
Almenn uppsetningarskref:
- Öryggi fyrst: Disconnect the vehicle's battery. Ensure the engine is cool.
- Tæming eldsneytis: Relieve fuel pressure and drain any fuel from the fuel lines to prevent spills.
- Remove Air Cleaner: Detach the air cleaner assembly from the old carburetor.
- Aftengja tengi og slöngur: Carefully disconnect all fuel lines, vacuum hoses, and throttle/choke linkages from the old carburetor. Label them if necessary for reassembly.
- Fjarlægðu gamla karburatorinn: Unbolt the old carburetor from the intake manifold. Remove the old gasket.
- Prepare for New Carburetor: Clean the intake manifold surface thoroughly. Place a new carburetor gasket onto the manifold.
- Setja upp nýjan karburator: Carefully place the new DEUSES Carburetor onto the gasket and secure it with the mounting bolts. Tighten bolts evenly to prevent warping.
- Tengdu íhluti aftur: Reattach all fuel lines, vacuum hoses, and throttle/choke linkages to the new carburetor. Ensure all connections are secure and free of leaks.
- Install Air Cleaner: Settu lofthreinsibúnaðinn aftur upp.
- Tengdu rafhlöðuna aftur: Tengdu rafhlöðu ökutækisins aftur.
- Initial Start-up and Adjustment: Start the engine and check for fuel leaks. Allow the engine to reach operating temperature. Perform initial idle speed and mixture adjustments as required for your specific vehicle model.

Mynd 3: Hlið view of the DEUSES Carburetor, highlighting the fuel inlet and various adjustment screws.
5. Rekstur
Once installed and properly adjusted, the carburetor will regulate the air-fuel mixture supplied to the engine. Proper operation relies on correct initial setup and regular maintenance.
Lykilatriði í rekstri:
- Kald byrjun: Utilize the choke mechanism (if applicable) for easier starting in cold weather.
- Upphitun: Allow the engine to warm up to operating temperature before driving to ensure stable idle and optimal performance.
- Inngjöf svar: The carburetor should provide smooth and responsive acceleration.
- Idle Stability: A properly adjusted carburetor will maintain a consistent engine idle speed.

Mynd 4: Aftan view of the DEUSES Carburetor, showing the throttle linkage and mounting points.
6. Viðhald
Regular maintenance is crucial for the longevity and efficient operation of your carburetor. Adhere to your vehicle's manufacturer recommendations for service intervals.
Ábendingar um viðhald:
- Loftsía: Skoðið og skiptið reglulega um loftsíuna til að koma í veg fyrir að óhreinindi og rusl komist inn í karburatorinn.
- Eldsneytissía: Ensure the fuel filter is clean and functioning correctly to prevent contaminants from reaching the carburetor.
- Smurning tengibúnaðar: Periodically lubricate throttle and choke linkages to ensure smooth operation.
- Sjónræn skoðun: Check for any loose connections, cracked hoses, or fuel leaks around the carburetor.
- Þrif: If performance issues arise, a professional carburetor cleaning may be necessary. Avoid using harsh chemicals that could damage seals or components.

Mynd 5: Framan view of the DEUSES Carburetor, showing the main body and various ports.
7. Bilanagreining
This section addresses common issues that may arise with carburetor operation. For complex problems, consult a qualified automotive technician.
Algeng vandamál og lausnir:
- Vélin sveiflast en ræsist ekki:
- Check fuel supply to the carburetor.
- Verify choke operation.
- Inspect for vacuum leaks.
- Óreglulegur lausagangur eða stöðvun:
- Adjust idle speed and mixture screws.
- Check for vacuum leaks.
- Ensure fuel filter is clean.
- Poor Acceleration or Hesitation:
- Inspect accelerator pump operation.
- Check for clogged fuel passages.
- Verify proper choke disengagement.
- Excessive Fuel Consumption:
- Check float level adjustment.
- Ensure mixture screws are correctly set.
- Inspect for fuel leaks.

Mynd 6: Neðst view of the DEUSES Carburetor, showing the base plate and mounting holes.
8. Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Framleiðandi | DEUSES |
| OEM hlutanúmer | 2105-1107010-20 |
| Compatible Engine Displacements | 1200ccm, 1300ccm, 1.6L (1590CC) |
| Samhæfðar gerðir ökutækja | Lada 2101-2107, Lada Niva (1988-1992) |
| Þyngd hlutar | 0.035 ounces (Note: This weight seems unusually low for a carburetor and may be a data entry error. Please refer to actual product for accurate weight.) |
| ASIN | B0CFTHSPG3 |
9. Ábyrgð og stuðningur
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the DEUSES customer service department. Keep your purchase receipt as proof of purchase.
For further assistance, please visit the DEUSES official websíðuna eða hafið samband við viðurkenndan söluaðila.