SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8 User Manual

1. Inngangur

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Vöru lokiðview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

Mynd 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Uppsetning

3.1 Hleðsla tækisins

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Kveikt/slökkt

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• Til að slökkva á: Ýttu á og haltu inni aflrofanum í um það bil 3 sekúndur þar til vísirljósið slokknar.

3.3 Upphafleg Bluetooth-pörun

1. Ensure the AN-SX8 is powered off.
2. Ýttu á og haltu inni aflrofanum í um það bil 5-7 sekúndur þar til stöðuljósið blikkar hratt, sem gefur til kynna pörunarstillingu.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Notkunarleiðbeiningar

4.1 Bluetooth-tenging

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 AUX tenging

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Hljóðstyrkur

• Ýttu á Hljóðstyrkur (+) hnappinn til að auka hljóðstyrkinn.
• Ýttu á Hljóðstyrkur niður (-) hnappinn til að lækka hljóðstyrkinn.

4.4 Spilunarstýring (Bluetooth-stilling)

• Ýttu á Spila / gera hlé button once to play or pause audio.
• Ýttu tvisvar á Spila / gera hlé hnappinn til að fara í næsta lag.
• Ýttu þrisvar á Spila / gera hlé hnappinn til að fara í fyrra lagið.

4.5 Símtalsvinnsla (Bluetooth-stilling)

• Ýttu á Spila / gera hlé hnappinn einu sinni til að svara innhringingu.
• Ýttu á Spila / gera hlé button once during a call to end it.
• Ýttu á og haltu inni Spila / gera hlé hnappinn í 2 sekúndur til að hafna símtali.

5. Viðhald

5.1 Þrif

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Geymsla

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Umhirða rafhlöðu

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Bilanagreining

• Enginn kraftur: Gakktu úr skugga um að tækið sé fullhlaðið. Tengdu það við rafmagn og athugaðu hleðsluvísinn.
• Ekkert hljóð:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • Ef þú notar Bluetooth skaltu prófa að aftengja tækið og para það aftur.
• Vandamál með Bluetooth-tengingu:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Slökktu og kveiktu á Bluetooth á upprunatækinu þínu.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Bjagað hljóð:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Athugaðu hvort gæðavandamál séu á hljóðgjafanum.

7. Tæknilýsing

8. Öryggisupplýsingar

• Ekki láta tækið verða fyrir vatni, raka eða miklum hita.
• Forðist langvarandi hlustun á háum hljóðstyrk til að koma í veg fyrir heyrnarskaða.
• Ekki reyna að taka í sundur, gera við eða breyta tækinu.
• Geymið þar sem börn og gæludýr ná ekki til.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Ábyrgð og stuðningur

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

Fyrir frekari aðstoð, vinsamlegast farðu á SHARP Support Websíða (tdamptengill, raunverulegur tengill getur verið breytilegur).