Womier SK75 75% Keyboard Instruction Manual

1. Uppsetningarleiðbeiningar

1.1 Innihald pakka

Þegar þú tekur kassann úr kassanum skaltu ganga úr skugga um að allir íhlutir séu til staðar:

• Womier SK75 75% Keyboard (Full Aluminum CNC body)
• USB-C til USB-A snúru
• Keycap Puller
• Switch Puller
• 2.4 GHz þráðlaus móttakari
• Additional Keycaps (e.g., Mac modifiers)
• Notendahandbók

Figure 1.1: Contents of the Womier SK75 Keyboard package.

1.2 Tengingaraðferðir

The Womier SK75 keyboard supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.0. Ensure the battery switch, located underneath the Caps Lock key, is in the "ON" position for wireless modes.

1.2.1 2.4GHz þráðlaus tenging

1. Insert the 2.4GHz receiver into an available USB port on your computer.
2. Ýttu á FN + TAB to switch to F4 blinking. The indicator light will become steady when the connection is successful.

1.2.2 Bluetooth-tenging

1. Ýttu á FN + TAB to switch to F1-F3 blinking.
2. Ýttu lengi FN + F1 / F2 / F3 to initiate pairing. The indicator light will flash rapidly.
3. On your device (Laptop, PC, Tablet, Smartphone, Mac), search for Bluetooth devices and select "Womier SK75".
4. The keyboard can store up to three different wireless devices. Switch between them by pressing FN + F1 / F2 / F3.

1.2.3 hlerunarbúnaðartenging

1. Insert the USB-C connector of the cable into the keyboard's USB-C port.
2. Connect the other end of the USB-A cable to your computer's USB port.
3. Ýttu á FN + TAB to switch to the ESC indicator light. A rotating light effect indicates a successful connection.

Mynd 1.2: Yfirview af þremur tengistillingum.

2. Notkunarleiðbeiningar

2.1 VIA Programmable Customization

The Womier SK75 is a VIA programmable keyboard, allowing for extensive customization of key layouts, macros, and lighting effects. VIA is an open-source firmware that provides a user-friendly graphical interface for programming your keyboard.

• Download the VIA software from the official website (search "VIA keyboard software").
• Tengdu lyklaborðið þitt með USB-C.
• Use the VIA interface to remap keys, create custom macros, and adjust lighting settings.

Figure 2.1: VIA software for keyboard customization.

2.2 RGB baklýsingarstýring

The keyboard features 16.8 million RGB cool backlighting with south-facing LEDs for brighter illumination. You can control various lighting effects directly from the keyboard using the following key combinations:

Figure 2.2: RGB lighting control shortcuts.

3. Viðhald

3.1 Þrif á lyklaborðinu

To maintain the performance and appearance of your Womier SK75 keyboard, regular cleaning is recommended:

• Aftengdu lyklaborðið frá tölvunni þinni.
• Notið mjúkan bursta eða þrýstiloft til að fjarlægja ryk og rusl á milli lyklaborðanna.
• For stubborn dirt, gently wipe the keycaps and case with a slightly damp, lólaus klút. Forðist mikinn raka.
• Ekki nota sterk efni eða slípiefni.

3.2 Rofar og lyklaborð sem hægt er að skipta um án hita

The Womier SK75 features a hot-swappable PCB, allowing you to easily change 3-pin or 5-pin mechanical switches without soldering. The keyboard comes pre-installed with high-quality POM linear switches, which are factory-lubed for a smooth typing experience.

To replace switches or keycaps:

1. Notaðu meðfylgjandi lyklakipputrekkjara til að fjarlægja varlega viðkomandi lyklakippu.
2. Use the included switch puller to carefully grip the switch from the top and bottom clips, then pull it straight up to remove.
3. Stilltu pinnunum á nýja rofanum saman við götin á prentplötunni og þrýstu fast niður þar til þeir smellpassa. Gakktu úr skugga um að pinnarnir séu ekki beygðir.
4. Place the new keycap onto the switch stem and press down until secure.

Figure 3.1: Hot-swapping switches on the Womier SK75.

Figure 3.2: Details of the Full POM Linear Switches.

Figure 3.3: Internal structure and components of the Womier SK75.

4. Bilanagreining

If you encounter issues with your Womier SK75 keyboard, please refer to the following common problems and solutions:

4.1 Tengingarvandamál

• Lyklaborð tengist ekki þráðlaust: Ensure the battery switch under the Caps Lock key is in the "ON" position. For 2.4GHz, verify the receiver is properly inserted and try a different USB port. For Bluetooth, ensure the keyboard is in pairing mode (rapid flashing F1/F2/F3) and your device's Bluetooth is enabled.
• Hlerunartenging ekki þekkt: Try a different USB-C cable or a different USB port on your computer. Ensure the cable is fully inserted into both the keyboard and the computer.
• Stöðug tenging: Ensure the keyboard is within range of the receiver/Bluetooth device. Avoid sources of interference (e.g., other wireless devices, large metal objects).

4.2 Lykilatriði varðandi virkni

• Lyklar svara ekki: Check if the switch is properly seated. If not, remove the keycap and switch, then reinsert the switch firmly. If the issue persists, try replacing the switch with a spare one.
• Double typing or missed keystrokes: This can sometimes be resolved by reseating the switch. If the problem continues, the switch may be faulty and require replacement.
• Rangt lykilúttak: Verify your key mappings in the VIA software. Reset to default settings if necessary.

4.3 Vandamál með lýsingu

• RGB ljós virka ekki: Ensure the backlight is turned on using FN + Til baka. Check brightness settings using FN + ↑.
• Ósamræmi í lýsingu: This might indicate a loose switch or LED. Try reseating the switch.

5. Vörulýsing

Figure 5.1: Womier SK75 Keyboard Dimensions.

6. Ábyrgð og stuðningur

For any product inquiries, technical support, or warranty claims, please contact Womier customer service through the platform where you purchased the product or visit the official Womier websíða fyrir upplýsingar um tengiliði.

Vinsamlegast geymið kaupkvittunina vegna ábyrgðar.