YESWELDER FLUX-135 MINI 135Amp 3-in-1 Welder Instruction Manual

1. Vöru lokiðview

The YESWELDER FLUX-135 MINI is a versatile 135Amp 3-in-1 welding machine designed for various welding tasks. It supports Flux Core Gasless MIG, Stick, and Lift TIG welding processes. This machine is suitable for both beginners and experienced welders due to its intuitive controls and synergic features.

Mynd 1: Framan view of the YESWELDER FLUX-135 MINI welding machine.

Helstu eiginleikar:

• Fjölferlisgeta: Supports Flux Core Gasless MIG, Stick, and Lift TIG welding.
• Samverkandi stjórnun: Automatically matches recommended voltage when adjusting wire feed speed for optimized welding parameters.
• Auðveld aðgerð: Intuitive control panel for straightforward adjustment of welding modes, voltage, and current/wire feed speed.
• Fyrirferðarlítil hönnun: Mini size for portability and convenience.

Figure 2: The 3-in-1 multi-function welding machine illustrating Flux Cored, Lift TIG, and Stick welding capabilities.

2. Öryggisupplýsingar

Welding can be hazardous. Always follow safety precautions to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

Almennar öryggisráðstafanir:

• Raflost: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the welding machine is properly grounded.
• Gufur og lofttegundir: Can be hazardous to your health. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes from the breathing zone and general area.
• Bogageislar: Can burn eyes and skin. Wear a welding helmet with a proper shade filter and protective clothing.
• Eldur og sprenging: Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
• Heitir hlutar: Getur valdið alvarlegum brunasárum. Leyfið búnaðinum að kólna áður en hann er snert.
• Hávaði: Of mikill hávaði getur skaðað heyrnina. Notið eyravernd.
• Vinnusvæði: Keep the work area clean, dry, and free from clutter. Ensure adequate lighting.

3. Uppsetning og uppsetning

3.1 Rafmagnstenging

Connect the welder to a standard 110V AC power outlet. Ensure the power source is capable of providing sufficient current for the welding operations.

3.2 Welding Wire Installation (Flux Core MIG)

1. Opnaðu vírmatarhólfið.
2. Place a 2LB (4-inch spool diameter) welding wire spool onto the spindle. The FLUX-135 MINI is compatible with .030"/.08mm flux cored wire.
3. Þræddu vírinn í gegnum leiðarrörið og inn í drifrúllubúnaðinn.
4. Close the drive roller tension arm and adjust the tension appropriately.
5. Feed the wire through the MIG torch liner until it exits the nozzle.

Figure 3: Installation of a 2LB gasless flux cored welding wire spool.

3.3 Electrode/Torch Connections

• MIG suðu: The MIG torch is typically pre-connected. Ensure the ground clamp er örugglega fest við vinnustykkið.
• Stafsuðu: Tengdu rafskautshaldarann ​​við jákvæða (+) tengið og jarðtenginguna.amp to the negative (-) terminal for most common electrodes. Refer to electrode manufacturer specifications.
• Lyftu TIG suðu: An additional Lift TIG torch (not included) is required. Connect the TIG torch to the negative (-) terminal and the ground clamp að jákvæðu (+) skautinu.

4. Notkunarleiðbeiningar

4.1 Stjórnborð yfirview

The FLUX-135 MINI features a simple and intuitive control panel. It includes a digital display, mode selection knob, and adjustment knobs for voltage/current and wire feed speed.

Mynd 4: Ítarleg view of the control panel, highlighting synergic control and efficiency.

4.2 Stillingarval

Use the mode selection knob to choose between Flux MIG, Stick, or Lift TIG welding processes.

4.3 Synergic Control and Parameter Adjustment

The synergic control feature simplifies parameter setting. When operating in Flux MIG mode, adjusting the wire feed speed knob will automatically suggest the corresponding voltage for optimal welding performance. For Stick and Lift TIG modes, the knobs will adjust current (ampaldur).

4.4 Welding Processes

• Flux Core Gasless MIG Welding:
  This mode uses flux-cored wire, eliminating the need for external shielding gas. Select Flux MIG mode, set your wire feed speed (voltage will adjust synergically), and begin welding. Ensure proper stick-out and travel speed for best results.
• Stick Welding (SMAW):
  Select Stick mode. Insert the appropriate electrode into the electrode holder. Adjust the current (amperage) based on the electrode type and material thickness. Maintain a consistent arc length and travel speed.
• Lift TIG Welding (GTAW):
  Note: Requires an additional Lift TIG torch (not included). Select Lift TIG mode. Connect the TIG torch and ground clamp as described in Section 3.3. Use ER70S-6 mild steel TIG welding rods for fabrication of mild steel. Initiate the arc by gently touching the tungsten electrode to the workpiece and then lifting it slightly. Adjust current (amperage) as needed.
  

  Figure 5: YESWELDER ER70S-6 mild steel TIG welding rods.
  

  Figure 6: ER70S-6 TIG welding rods available in 1/16", 3/32", and 1/8" diameters, all 16" long.

  

  Figure 7: An operator performing Lift TIG welding.

5. Viðhald

Reglulegt viðhald tryggir endingu og bestu mögulegu afköst suðuvélarinnar.

5.1 Þrif

• Hreinsið reglulega ytra byrði vélarinnar með þurrum, mjúkum klút.
• Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is unplugged before cleaning.

5.2 Skoðun á kaplum og tengingum

• Regularly inspect all welding cables, torch leads, and ground clamps for signs of wear, damage, or loose connections. Replace damaged components immediately.
• Gakktu úr skugga um að allar raftengingar séu þéttar og öruggar.

5.3 Viðhald vírmatara (MIG)

• Clean the drive rollers and wire guide tubes to prevent wire feeding issues.
• Check the MIG torch liner for blockages or wear. Replace if necessary.

6. Bilanagreining

Þessi hluti býður upp á lausnir á algengum vandamálum sem þú gætir lent í.

Ef þú lendir í vandamálum sem ekki eru talin upp hér eða ef vandamálið heldur áfram skaltu hafa samband við þjónustuver.

7. Tæknilýsing

Technical specifications for the YESWELDER FLUX-135 MINI.

8. Upplýsingar um ábyrgð

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official YESWELDER webvefsíðunni fyrir ítarlegar ábyrgðarskilmála. Geymið kaupkvittunina vegna ábyrgðarkröfu.

9. Þjónustudeild

For technical assistance, spare parts, or any inquiries regarding your YESWELDER FLUX-135 MINI, please contact YESWELDER customer support. You can typically find contact information on the official YESWELDER websíðunni eða í gegnum söluaðila þinn.

Tilföng á netinu: Heimsæktu YESWELDER Store on Amazon fyrir upplýsingar um vörur og aðstoð.