Sodola 24-Port 2.5Gb Easy Smart Managed PoE Switch User Manual

1. Inngangur

This manual provides detailed instructions for the installation, configuration, and operation of your Sodola 24-Port 2.5Gb Easy Smart Managed PoE Switch. This device is designed to provide high-speed network connectivity and Power over Ethernet (PoE) capabilities for various network devices.

The switch features 24 2.5Gb PoE ports and 2 10G SFP+ uplink ports, offering robust performance for demanding network environments. It supports web-byggð stjórnun fyrir auðvelda stillingu og eftirlit.

2. Innihald pakka

Staðfestu að pakkinn þinn inniheldur eftirfarandi hluti:

• 1 x Sodola 24-Port 2.5G Managed PoE Switch
• 1 x rafmagnsleiðsla
• 1 x Notendahandbók (þetta skjal)

3. Vöru lokiðview

The Sodola 24-Port 2.5Gb PoE Switch is a multi-gigabit managed switch designed for high-performance networking. It offers a combination of 2.5 Gigabit Ethernet ports with Power over Ethernet capabilities and 10 Gigabit SFP+ ports for high-speed uplinks.

3.1 Helstu eiginleikar

• 2.5G & 10G PoE Switch: 24x 2.5Gb PoE ports + 2x 10G SFP+ ports for high-speed network connectivity.
• IEEE 802.3bt/at/af Compliant: Ports 1-4 support up to 90W each, and ports 5-24 support up to 30W each, with an overall PoE power budget of 500W. Note: Does not support passive 24V PoE devices.
• Auðvelt Web Stjórn: Innsæi web interface for device status monitoring and configuration of features like Link Aggregation, VLAN, QoS, Multicast, MAC, and RSTP.
• 160 Gbps bandbreidd: Robust switching capacity for lag-free data transfers.
• Alhliða samhæfni: Compatible with various Ethernet devices such as 2.5G WiFi 6 APs, 2.5G NAS, 2.5G PCIe Adapters, and 2.5G Servers.
• 1U Rack Mounted Design: Supports 1U rack mounting and features a bilateral cooling design without a built-in fan for silent operation.

3.2 Skipulag framhliðar

Figure 1: Front Panel Layout with Port and Indicator Labels

• 1. 1G/10G or 2.5G/10G SFP+ Ports: Two ports for high-speed fiber optic uplinks.
• 2. 24x 10/100/1000M/2.5G PoE Ports: Twenty-four 2.5 Gigabit Ethernet ports with Power over Ethernet capabilities.
• 3. RESET Button: Haltu inni í 6 sekúndur til að endurheimta verksmiðjustillingar.
• 4. LINK/ACT & PoE Indicators: LEDs indicating link status, activity, and PoE power status for each port.
• 5. SYS Indicator: Stöðuljós kerfis.
• 6. PWR Indicator: Gaumljós aflgjafa.

3.3 Skipulag bakhliðar

Figure 2: Rear Panel Layout with Power Input and Grounding Screw

• 7. AC INPUT 100-240V: Power input for the switch.
• 8. Ground Screws: Til að tengja jarðvír til að tryggja rafmagnsöryggi.
• 9. PoE MAX Indicator: Shows the PoE power usage status (OFF: <90%, FLASHING: 90%-95%, ON: 95%-100%).

4. Uppsetning

Follow these steps to set up your Sodola PoE Switch:

4.1 Líkamleg uppsetning

• Staðsetning skjáborðs: Setjið rofann á slétt og stöðugt yfirborð. Tryggið næga loftræstingu í kringum tækið.
• Festing fyrir rekki: The switch supports 1U rack mounting. Use appropriate rack-mount brackets (not included unless specified) to secure the device in a standard 19-inch server rack.

Figure 3: Rack Mounting Example

4.2 Rafmagnstenging

1. Connect the provided power cord to the AC INPUT port on the rear panel of the switch.
2. Plug the other end of the power cord into a standard AC power outlet (100-240V).
3. The PWR indicator on the front panel should illuminate, indicating the switch is receiving power.

4.3 Nettengingar

Connect your network devices to the switch using Ethernet cables. For optimal 2.5GbE speeds, use Cat6 or higher pure copper cables. Ensure all connected devices (routers, NICs, etc.) also support 2.5GbE; otherwise, network speed will default to the slowest connected device.

• PoE tæki: Connect PoE-compatible devices (e.g., IP cameras, wireless access points) to ports 1-24. These ports will automatically detect and provide power to compliant devices.
• Non-PoE Devices: Non-PoE devices can also be connected to ports 1-24 for data connectivity.
• Uplink tengingar: Use the 10G SFP+ ports for high-speed connections to your core network, servers, or other 10G-capable devices.

5. Notkunarleiðbeiningar

The Sodola PoE Switch is largely plug-and-play for basic network connectivity. Once powered on and devices are connected, it will begin forwarding data.

5.1 LED Vísar

Fylgstu með LED-ljósunum á framhliðinni til að sjá stöðu tækisins:

• PWR: Solid green when the switch is powered on.
• SYS: Indicates system status. Refer to the full user manual for specific blink patterns.
• LINK/ACT (per port): Solid green when a link is established, flashing green when data is being transmitted/received.
• PoE (per port): Solid green when PoE power is being supplied to a connected device.
• PoE MAX: Indicates total PoE power usage. OFF: <90%, FLASHING: 90%-95%, ON: 95%-100%.

5.2 Núllstilla í verksmiðjustillingar

To restore the switch to its factory default settings, press and hold the RESET button on the front panel for approximately 6 seconds. The switch will reboot with default configurations.

6. Web Stjórnun

The switch features an easy-to-use web-based management interface for advanced configuration and monitoring.

6.1 Aðgangur að Web Viðmót

1. Gakktu úr skugga um að tölvan þín sé tengd við rofann með Ethernet snúru.
2. Configure your computer's IP address to be in the same subnet as the switch's default IP address (e.g., if the switch is 192.168.2.1, set your computer to 192.168.2.x, where x is not 1).
3. Opna a web vafrinn og sláðu inn sjálfgefna IP-tölu rofans: 192.168.2.1
4. Sláðu inn sjálfgefin innskráningarupplýsingar: Notandanafn: admin, Lykilorð: admin.
5. Þegar innskráning hefur tekist færðu aðgang að web stjórnendaviðmót.

Mynd 4: Web Management Interface Login

6.2 Configuration Features

The web interface allows you to configure various network settings, including:

• Tenglasöfnun (LACP): Sameina margar efnislegar tengingar í eina rökrétta tengingu til að auka bandvídd og afritun.
• VLAN: Create Virtual Local Area Networks to segment your network for improved security and performance.
• Þjónustugæði (QoS): Forgangsraða netumferð til að tryggja að mikilvæg forrit fái næga bandvídd.
• Multicast (IGMP Snooping): Optimize multicast traffic delivery to reduce network congestion.
• MAC Address Management: Aðgangsstýring byggð á MAC-tölum.
• RSTP (Rapid Spanning Tree Protocol): Prevent network loops and ensure network stability.
• Portspeglun: Fylgstu með netumferð með því að senda afrit af pökkum frá einni tengingu til annarrar.
• Jumbo Frame Stuðningur: Increase data transfer efficiency for large packets.

Important: After making any configuration changes in the web interface, navigate to the 'Tools' or 'Save' section and save your settings to ensure they are retained after a power cycle.

7. Tæknilýsing

8. Bilanagreining

• Enginn kraftur: Ensure the power cord is securely connected to both the switch and a working power outlet. Check the PWR LED.
• Enginn tengill/virkni: Verify that Ethernet cables are properly connected to both the switch and the network device. Check the LINK/ACT LED for the respective port. Ensure the connected device is powered on and functioning correctly.
• Hægur nethraði: For 2.5GbE connections, ensure you are using Cat6 or higher pure copper cables and that all devices in the network path support 2.5GbE.
• PoE tækið kveikir ekki á sér: Confirm the connected device is PoE-compatible (IEEE 802.3af/at/bt). Check the PoE LED for the port. Ensure the total PoE power budget of 500W is not exceeded. Passive 24V PoE devices are not supported.
• Ekki er hægt að nálgast Web Tengi: Verify your computer's IP address is in the same subnet as the switch's default IP (192.168.2.1). Ensure the correct default username and password ('admin'/'admin') are used. Try resetting the switch to factory defaults if the IP address has been changed and forgotten.
• Configuration Changes Not Saved: Remember to explicitly save configurations through the web interface after making changes.

9. Viðhald

• Þrif: Notið mjúkan, þurran klút til að þrífa ytra byrði rofans. Notið ekki fljótandi hreinsiefni eða úðabrúsa.
• Loftræsting: Ensure the ventilation openings on the sides of the switch are not obstructed to allow for proper heat dissipation.
• Uppfærsla vélbúnaðar: Athugaðu reglulega upplýsingar framleiðanda webvefsíða fyrir uppfærslur á vélbúnaði til að tryggja bestu mögulegu afköst og öryggi.

10. Ábyrgð og stuðningur

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official Sodola websíða. Geymdu kaupkvittun þína fyrir ábyrgðarkröfur.