Alloyman 12V 3/8-inch Cordless Electric Ratchet Wrench Set Instruction Manual

1. Öryggisupplýsingar

Lestu allar öryggisviðvaranir, leiðbeiningar, myndir og upplýsingar sem fylgja þessu rafmagnsverkfæri. Ef ekki er fylgt öllum leiðbeiningum hér að neðan getur það valdið raflosti, eldi og/eða alvarlegum meiðslum.

Almennar öryggisviðvaranir fyrir rafmagnsverkfæri:

• Öryggi vinnusvæðis: Keep work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Rafmagnsöryggi: Rafmagnsverkfærastungur verða að passa við innstungu. Breyttu aldrei innstungunni á nokkurn hátt. Ekki nota nein millistykki með jarðtengdum rafverkfærum. Óbreytt innstungur og samsvarandi innstungur munu draga úr hættu á raflosti.
• Persónulegt öryggi: Always wear eye protection. Use appropriate safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection for relevant conditions. Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Notkun verkfæra og umhirða: Do not force the power tool. Use the correct power tool for your application. It will do the job better and safer at the rate for which it was designed. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.
• Notkun og umhirða rafhlöðuverkfæra: Endurhlaða aðeins með hleðslutækinu sem framleiðandi tilgreinir. Hleðslutæki sem hentar fyrir eina tegund rafhlöðupakka getur skapað eldhættu þegar það er notað með öðrum rafhlöðupakka. Notaðu rafmagnsverkfæri eingöngu með sérmerktum rafhlöðupökkum. Notkun annarra rafhlöðupakka getur skapað hættu á meiðslum og eldi.

2. Innihald pakka

Verify that all items listed below are present and in good condition upon opening the package.

• 1 x Alloyman 3/8-inch Cordless Electric Ratchet Wrench
• 2 x 12V 2.0Ah Power Batteries
• 1 x hleðslutæki
• 6 x Sockets (10mm, 12mm, 13mm, 14mm, 15mm, 17mm)
• 1 x 3-inch Extension Rod
• 1 x 1/4-inch Drive Adapter
• 1 x 1/2-inch Drive Adapter
• 1 x Notendahandbók
• 1 x geymslukassi

3. Vörueiginleikar

• Extended Reinforced Alloy Head: Features a 5.5-inch long neck profile and an ultra-slim 3/8-inch compact head for accessing tight spaces. The head is constructed from steel alloy for enhanced durability and impact resistance.
• Mikil togkraftur: Delivers up to 60 ft-lbs (80 Nm) of torque, suitable for tightening and loosening most nuts and bolts.
• Öflugur 12V mótor: Equipped with a 12V pure copper motor for efficient performance.
• Breytilegur hraði kveikja: Allows for precise speed control from 0 to 250 RPM based on trigger pressure.
• Long-lasting Batteries: Includes two 12V 2.0Ah rechargeable lithium-ion batteries, designed for extended use and 500 charge cycles.
• Innbyggt LED ljós: Illuminates the work area for improved visibility in dark or confined spaces.
• Rafhlöðuvísir: Displays the remaining battery charge level, allowing for timely recharging.
• Ergonomic Soft Grip: Designed for comfortable handling and reduced hand fatigue during prolonged use.
• Rofi fyrir fram/aftur: Skiptu auðveldlega á milli herði- og losunarstillinga.

4. Uppsetning

4.1 Hleðsla rafhlöðunnar

Before first use, fully charge both 12V 2.0Ah batteries. Connect the charger to a standard power outlet and insert the battery pack. The charger indicator light will show the charging status (e.g., red for charging, green for fully charged). Ensure the battery is securely seated in the charger.

4.2 Attaching Sockets and Adapters

1. Ensure the ratchet wrench is turned off and the battery is removed before attaching or detaching accessories.
2. Select the appropriate socket size (10mm, 12mm, 13mm, 14mm, 15mm, 17mm) or drive adapter (1/4-inch, 1/2-inch) for your task.
3. Align the square drive of the socket or adapter with the square drive on the ratchet head.
4. Push the socket/adapter firmly onto the drive until it clicks into place, ensuring it is securely fastened.
5. To use the 3-inch extension rod, attach it to the ratchet head first, then attach the desired socket to the extension rod.

5. Notkunarleiðbeiningar

5.1 Rafhlaðan sett upp

Slide a charged 12V battery pack into the base of the ratchet wrench handle until it locks securely into place. Ensure it is fully seated to prevent accidental disconnection during operation.

5.2 Kveikt og slökkt

Verkfærið er virkjað með því að ýta á kveikjuna fyrir breytilegan hraða. Slepptu kveikjunni til að slökkva á verkfærinu.

5.3 Breytileg hraðastýring

The speed of the ratchet wrench is controlled by the amount of pressure applied to the trigger. A lighter press results in lower RPM, while a firmer press increases the speed up to 250 RPM. This allows for precise control depending on the application.

5.4 Ganga áfram/aftur á bak

To change the direction of rotation, use the forward/reverse lever located on the head of the ratchet. Push the lever to the left for forward (tightening) and to the right for reverse (loosening). Always ensure the tool has come to a complete stop before changing direction.

5.5 Notkun LED vinnuljóssins

The built-in LED light automatically illuminates when the trigger is pressed, providing visibility in dimly lit work areas. This feature is particularly useful when working in engine bays or other confined spaces.

5.6 Rafhlöðuvísir

The battery indicator lights on the tool provide a visual representation of the remaining battery charge:

• Grænn: 80% - 100% hleðsla
• Yellow: 50% - 80% hleðsla
• Rauður: Below 50% charge (recharge soon)

6. Viðhald

6.1 Þrif

Hreinsið reglulega ytra byrði verkfærisins með mjúkum, þurrum klút.amp cloth. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings clear of dust and debris to prevent overheating.

6.2 Umhirða og geymsla rafhlöðu

• Geymið rafhlöður á köldum, þurrum stað fjarri beinu sólarljósi og miklum hita.
• Geymið ekki rafhlöður í tómum ástandi í langan tíma. Endurhlaðið þær reglulega ef þær eru ekki í notkun.
• Protect batteries from physical damage.

6.3 Almenn skoðun

Periodically inspect the tool for any signs of damage, loose parts, or wear. If any issues are found, discontinue use and contact customer support for assistance.

7. Bilanagreining

If the problem persists after attempting these solutions, please contact Alloyman customer support.

8. Tæknilýsing

9. Ábyrgð og stuðningur

Alloyman provides a warranty of up to 365 days for this product. If you encounter any issues with your Alloyman 12V 3/8-inch Cordless Electric Ratchet Wrench Set within this period, please contact our customer support team.

For warranty claims, technical assistance, or any other inquiries, please refer to the contact information provided in your product packaging or visit the official Alloyman websíða.

Please have your model number (12vRED) and purchase details ready when contacting support.

10. Sýnikennsla á vörumyndbandi