Generic LED Driver 300mA 18-36W Constant Current Power Supply Module User Manual

1. Inngangur

This manual provides essential information for the safe and efficient use of the Generic LED Driver 300mA 18-36W Constant Current Power Supply Module. Please read these instructions carefully before installation and operation. Keep this manual for future reference.

2. Öryggisupplýsingar

• Rafmagnshætta: Installation and wiring should only be performed by qualified personnel. Ensure power is disconnected before any installation or maintenance.
• Non-Isolated Design: This is a non-isolated LED driver. Exercise extreme caution during handling and operation to avoid electrical shock. Do not touch the circuit board when power is applied.
• Voltage Samhæfni: Staðfestu að inntak voltage of the driver matches your local power supply (AC200-240V for this model).
• Álagssamsvörun: Ensure the connected LED load's voltage and current requirements are within the driver's specified output range (DC54-110V, 300mA). Overloading can damage the driver and LEDs.
• Umhverfisskilyrði: Do not expose the driver to excessive moisture, dust, or extreme temperatures outside its operating range.

3. Vöru lokiðview

The Generic LED Driver is a compact, constant current power supply module designed for various LED lighting applications. It features a lightweight design for easy installation and efficient heat dissipation for long-term operation. Its durable shell provides resistance to impact and corrosion, and it is designed for silent operation.

Helstu eiginleikar:

• Létt hönnun: Compact size for easy installation and space saving.
• Lág hitamyndun: Efficient heat dissipation ensures long-term operation without overheating.
• Hljóðlaus aðgerð: No noise interference, suitable for use in quiet environments.
• Endingargott skel: Resistant to impact and corrosion, extending service life.
• Waterproof and Moisture-proof: Adaptable to various environments.

4. Tæknilýsing

Refer to the image below for detailed electrical and physical specifications.

Image 1: LED Driver dimensions and electrical specifications. This image shows the driver's physical dimensions (33mm x 20mm x 13mm) and key electrical parameters: Power (18-36W), Input voltage (AC200-240V), Output voltage (DC54-110V), Output current (300mA ±5%), and No load output voltage (DC314V max).

• Gerðarnúmer: JCUIUCCCC-18-36W-300MA
• Inntak Voltage: AC200-240V
• Output Voltage: DC54-110V
• Úttaksstraumur: 300mA ±5%
• Kraftur: 18-36W
• Engin hleðsla framleiðsla Voltage: DC314V (max)
• Stærðir: Um það bil 33 mm x 20 mm x 13 mm
• Þyngd: Um það bil 13g
• Efni: Smart IC + PCB

5. Uppsetning og raflögn

Follow these steps for proper installation and wiring. Ensure all power is disconnected before proceeding.

Image 2: LED Driver wiring diagram. This diagram illustrates the connection points for the LED driver. The input wires (white) connect to the AC200-240V voltage input terminal. The output wires (red and white) connect to the LED load, with the red wire being the DC positive pole (+) and the white wire being the DC negative pole (-).

1. Aftengdu rafmagn: Turn off the main power supply to the circuit where the LED driver will be installed.
2. Þekkja víra: The driver has two sets of wires:
   • Inntaksvír: Typically white, these are for connecting to the AC power supply (AC200-240V).
   • Úttaksvír: Typically red and white, these are for connecting to the LED load. The red wire is the DC positive (+) output, and the white wire is the DC negative (-) output.
3. Tengingarinntak: Connect the input wires of the LED driver to your AC200-240V power source. Ensure secure connections using appropriate connectors or terminal blocks.
4. Tengdu úttak: Connect the red output wire of the driver to the positive (+) terminal of your LED load. Connect the white output wire of the driver to the negative (-) terminal of your LED load. Ensure correct polarity to prevent damage to the LEDs.
5. Örugg uppsetning: Mount the LED driver in a suitable, well-ventilated location, away from direct heat sources or flammable materials. Ensure it is protected from physical damage.
6. Endurheimta kraft: Þegar allar tengingar eru öruggar og staðfestar skal koma rafmagninu aftur á.

6. Notkunarleiðbeiningar

Once properly installed, the LED driver operates automatically. It converts the AC input voltage to a constant DC current suitable for powering compatible LED loads.

• Kveikt á: Apply AC power to the input terminals. The connected LEDs should illuminate.
• Constant Current Output: The driver maintains a stable 300mA output current, ensuring consistent brightness and extending the lifespan of your LEDs within its specified voltage svið.
• Eftirlit: Observe the LEDs for proper illumination. If they do not light up or flicker, refer to the troubleshooting section.

7. Viðhald

The LED driver is designed for minimal maintenance. However, periodic checks can help ensure its longevity and performance.

• Þrif: Ensure the driver remains free of dust and debris. If cleaning is necessary, disconnect power and use a dry, soft cloth. Do not use liquid cleaners.
• Tengingarathuganir: Skoðið reglulega víratengingar til að tryggja að þær séu þéttar og lausar við tæringu.
• Umhverfisskilyrði: Verify that the operating environment continues to meet the recommended conditions (temperature, humidity).
• Tjónaskoðun: If the driver's casing appears damaged or if you notice any unusual odors or sounds, disconnect power immediately and replace the unit.

8. Bilanagreining

If you encounter issues with your LED driver, consult the following table:

If the problem persists after attempting these solutions, contact customer support or a qualified electrician.

9. Ábyrgð og stuðningur

For warranty information and technical support, please refer to the product's purchase documentation or contact the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.