Alloyman 16-Line 4D Green Self-Leveling Laser Level

1. Öryggisupplýsingar

Please read and understand all safety instructions before operating this laser level. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, and/or serious injury.

1.1 Laser öryggi

• This product is a Class II laser device. Do not stare directly into the laser beam.
• Forðist beina útsetningu fyrir augum fyrir leysigeisla.
• Do not disassemble the laser level. Repairs should only be performed by authorized service personnel.
• Do not operate the laser level in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep the laser level out of reach of children.

1.2 Öryggi rafhlöðu

• Use only the specified rechargeable lithium-ion batteries and charger provided with the device.
• Ekki útsetja rafhlöður fyrir háum hita eða beinu sólarljósi.
• Ekki skammhlaupa rafhlöðuna.
• Fargið rafhlöðum á réttan hátt í samræmi við staðbundnar reglur.

2. Innihald pakka

Gakktu úr skugga um að allir hlutir séu til staðar og í góðu ástandi þegar pakkinn er opnaður:

• Alloyman 16-Line 4D Green Laser Level
• 95 cm Tripod
• Segulsvið
• 2 x 4.0V Lithium-ion Rechargeable Batteries
• Tegund C hleðslutæki
• Fjarstýring
• Laser Target Plate

3. Vöru lokiðview

The Alloyman 16-Line 4D Green Laser Level is designed for precise alignment in various indoor and outdoor applications. It features four 360-degree laser lines, offering comprehensive coverage for leveling, plumbing, and squaring tasks.

Image: The Alloyman 16-Line 4D Green Laser Level shown with its tripod, magnetic bracket, batteries, charger, remote control, and target plate.

3.1 Helstu eiginleikar

• 4x360° Green Laser Lines: Provides two horizontal and two vertical 360° laser planes for full room coverage.
• Mikil nákvæmni: Vertical and horizontal accuracy of ±1 mm/5 m.
• Sjálf-jöfnunarstilling: Automatically levels within ±3° tilt.
• Handvirk stilling: Allows projection of laser lines at any angle.
• Lengra vinnusvið: Up to 45 meters in diameter, with remote control capability.
• Langvarandi kraftur: Equipped with 2 x 3600 mAh lithium-ion batteries for up to 12 hours of continuous operation.
• Varanlegur hönnun: IP54 waterproof and dustproof rating, drop resistance up to 1.2m.
• Fjölhæfur festing: Includes a 95 cm tripod and a 360° magnetic bracket.

4. Uppsetning

4.1 Uppsetning og hleðsla rafhlöðu

1. Open the battery compartment cover on the side of the laser level.
2. Insert the 4.0V lithium-ion battery, ensuring correct polarity. Close the cover securely.
3. To charge the battery, connect the Type-C charger to the charging port on the battery or the device, then plug the charger into a power outlet. The battery indicator will show charging status.

Image: The laser level connected to its Type-C charger, with a spare battery also shown. This illustrates the charging process and battery capacity of 3600 mAh, providing up to 12 hours of operation.

4.2 Uppsetning á leysigeisla

The laser level can be mounted using the included tripod or magnetic bracket.

Notkun þrífótsins:

1. Extend the tripod legs to the desired height. The tripod can extend up to 95 cm.
2. Secure the laser level onto the tripod's 1/4" (6.35 mm) universal thread.
3. Adjust the tripod head to achieve the approximate desired angle.

Image: The portable tripod shown at different heights (43 cm, 60 cm, 95 cm), demonstrating its adjustable nature for various home use scenarios. Details of the rotating handle, locking knob, adjustable buckle, and anti-slip feet are also visible.

Using the Magnetic Bracket:

1. Attach the magnetic bracket to a metallic surface.
2. Mount the laser level onto the bracket's 1/4" (6.35 mm) universal thread.
3. The 360° rotating feature of the bracket allows for flexible positioning.

Image: The laser level demonstrating its dual mounting options: a 360° magnetic bracket for attaching to metal surfaces and a universal 1/4" (6.35 mm) thread for tripod mounting. This highlights its versatility for different applications.

5. Notkunarleiðbeiningar

5.1 Kveikt/slökkt

Slide the ON/OFF switch to the 'ON' position to power on the device. Slide it to 'OFF' to power off.

5.2 Sjálfjöfnunarstilling

When the pendulum is unlocked (ON position), the device automatically enters self-leveling mode. It will self-level within a 3° range. If the tilt exceeds 3°, the laser lines will flash and an audible alarm will sound, indicating that the device is out of level. Adjust the device's position until it is within the self-leveling range.

Image: A person hanging a picture on a wall, guided by the green laser lines from the Alloyman laser level in self-leveling mode. The image emphasizes the device's ±3° leveling compensation range.

5.3 Handvirk ham

To activate manual mode, long-press the mode button (often labeled 'M' or a similar icon) while the device is powered on. In manual mode, the laser lines can be projected at any desired angle, which is useful for tasks like installing handrails on stairs or other non-level applications. The laser lines will not flash in manual mode, even if the device is tilted beyond 3°.

Image: The laser level projecting an angled line along a staircase, demonstrating its manual mode capability. The image also shows a hand pressing the button to switch modes, indicating how to activate this feature.

5.4 Skipta um leysilínur

Use the 'V' button to activate/deactivate vertical laser lines and the 'H' button to activate/deactivate horizontal laser lines. You can combine different lines as needed for your project.

Image: Diagrams illustrating the various 4x360° laser line configurations, including vertical (V), horizontal (H), and combinations like H+H, V+V, V+V+H, and V+V+H+H. This shows the multi-mode functionality of the laser level.

5.5 Notkun fjarstýringar

The included remote control allows you to switch laser lines and modes from a distance, up to 33 feet (10 meters), enhancing convenience for large projects.

Image: The laser level projecting green lines across a large room, with a hand holding the remote control. This demonstrates the extended working range of up to 45 meters and the convenience of remote operation.

5.6 Púlshamur

The device features a pulse emission mode, which can be activated for use with a laser receiver (not included) to extend the working range and improve visibility in bright conditions.

6. Viðhald

• Þrif: Notaðu mjúkan, damp klút til að þrífa tækið. Notið ekki slípiefni eða leysiefni.
• Geymsla: Store the laser level in its carrying case in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods.
• Kvörðun: Regular calibration checks are recommended to ensure accuracy, especially after drops or impacts.

7. Bilanagreining

• Laser lines are flashing and alarm sounds: The device is likely out of its self-leveling range (more than 3° tilt). Adjust the position of the laser level until it is within the acceptable range.
• No laser lines: Ensure the device is powered on and the battery is charged. Check if the pendulum lock is in the correct position for the desired mode (unlocked for self-leveling, locked for manual).
• Weak laser lines: The battery might be low. Recharge the battery. Also, ensure you are not operating in excessively bright environments without a laser receiver.
• Fjarstýring virkar ekki: Athugaðu rafhlöðu fjarstýringarinnar. Gakktu úr skugga um að engar hindranir séu á milli fjarstýringarinnar og leysigeislans.

8. Tæknilýsing

Image: Three panels illustrating the durability of the laser level: IP54 waterproof rating, drop resistance up to 1.2m, and an operating temperature range of -20°C to +50°C.

9. Ábyrgð og stuðningur

Alloyman products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Alloyman webGeymið kaupkvittunina vegna ábyrgðarkröfu.