GEPRC-merki

GEPRC GEP-35A-F7 AIO flugstýring

GEPRC-GEP-35A-F7-AIO-Flight-Controller-product

Vörulýsing

  • Fyrirmyndarheiti: GEP-35A-F7
  • MCU: STM32F722
  • IMU: MPU6000 gyro/hröðunarmælir (SPI)
  • Fastbúnaðarmarkmið: GEPRCF722
  • OSD: Betaflight OSD með AT7456Ev
  • Núverandi skynjari:
  • OSD-stuðningur:
  • Pípari:
  • LED:
  • USB: ör USB
  • BEC framleiðsla: 5V @ 1A
  • Innbyggt LC sía
  • ESC MCU: BB21F16G
  • Stöðugur straumur: 35A
  • Hámarksstraumur: 45A (10s)
  • Inntak: 2 ~ 6S
  • Styður: Dshot600, Oneshot, Multishot
  • Núverandi mælir: 210
  • Markmið: G_H_30
  • Stærð: 32x32mm
  • Uppsetningarhola borðs: 26.5×26.5 mm, M2
  • Þyngd: 8.3g

Notkunarleiðbeiningar fyrir vöru

Uppsetning:

Ensure the ESC MCU is securely connected to the flight controller.

Stillingar:

  • Connect the micro USB to a compatible power source.
  • Use Betaflight OSD for configuration settings.

Kveikt á:

Apply power within the input range of 2~6S for optimal performance.

Flug:

  • Check all connections and settings before flight.
  • Utilize Dshot600, Oneshot, or Multishot as per your preference.

Leiðbeiningarskýringarmynd

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-1

DJI Digital FPV kerfi

Note: not all combinations are valid. When the flight controller firmware detects this the serial port configuration will be reset.
Note: Do NOT disable MSP on the first serial port unless you know what you are doing. You may have to reflash and erase your configuration if you do.

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-2

Móttökutæki

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-3

F. höfn

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-4

TBS Crossfire Nano RX

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-5

FlySky FSA8S V2

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-6

VTX

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-7GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-8

Myndavél

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-8

LED & Buzzer

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-10

GPS

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-11

Frekari upplýsingar

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-12

Algengar spurningar

Sp.: Hvernig uppfæri ég vélbúnaðinn á GEP-35A-F7?

A: To update the firmware, connect the device to a computer using the micro USB cable and use Betaflight Configurator to flash the latest firmware.

Sp.: Hvert er ráðlagt inntak binditagE-sviðið fyrir GEP-35A-F7?

A: Ráðlagt inntak binditage range is between 2 and 6 cells (2~6S) for optimal performance.

Sp.: Hvernig get ég athugað straumnotkun dróna míns með GEP-35A-F7?

A: The GEP-35A-F7 features a current meter that can be monitored through the Betaflight OSD during flight.

Skjöl / auðlindir

GEPRC GEP-35A-F7 AIO flugstýring [pdfLeiðbeiningarhandbók
GEP-35A-F7, ​​TEW27330000, R001, GEP-35A-F7 AIO flugstýring, GEP-35A-F7, ​​AIO flugstýring, Flugstýring, Stýring

Heimildir

Skildu eftir athugasemd

Netfangið þitt verður ekki birt. Nauðsynlegir reitir eru merktir *