Leiðbeiningarhandbók fyrir JET JSG-6DC borðslípvél með belti og diski

1. Inngangur og yfirview

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your JET JSG-6DC Benchtop Belt and Disc Sander. Please read and understand all instructions before operating the machine.

Figure 1: JET JSG-6DC Benchtop Belt and Disc Sander

The image displays the complete JET JSG-6DC Benchtop Belt and Disc Sander, showcasing its primary components including the belt sanding arm on the left, the disc sanding plate on the right, and the motor housing in the center with the power switch.

Helstu eiginleikar:

• Öflugur mótor: Equipped with a 1-1/2 HP motor for demanding sanding tasks.
• Dual Sanding Surfaces: Features a 6" x 48" belt and a 12" disc for versatile applications.
• Stillanleg beltisarmur: The belt can be used horizontally, vertically, or at any angle in between.
• Precision Tables: Cast iron tables with miter gauge slots and positive stops at 90 and 45 degrees.
• Skilvirk ryksöfnun: Single 4" dust port for effective dust extraction from both sanding surfaces.
• Graphite Platen: Graphite-covered steel platen for cooler operation and extended belt life.
• Auðveldar stillingar: Dual thumbscrew belt tracking adjustment and quick-release belt tension lever.

2. Öryggisleiðbeiningar

Fylgið alltaf grunnöryggisráðstöfunum til að draga úr hættu á eldsvoða, raflosti og meiðslum á fólki þegar rafmagnsverkfæri eru notuð. Geymið þessa handbók til síðari viðmiðunar.

Almennar öryggisreglur:

• Vinnusvæði: Haltu vinnusvæðinu hreinu og vel upplýstu. Ringulreið eða dökk svæði valda slysum.
• Rafmagnsöryggi: Do not expose power tools to rain or wet conditions. Avoid body contact with grounded surfaces.
• Persónulegt öryggi: Always wear eye protection. Use hearing protection when operating the sander. Wear appropriate clothing; avoid loose clothing, jewelry, and long hair that can get caught in moving parts.
• Rekstur vélar: Do not force the tool. Use the correct tool for your application. Ensure the power switch is in the OFF position before connecting to power.
• Viðhald: Taktu klóið úr aflgjafanum áður en þú gerir breytingar, skiptir um aukabúnað eða geymir verkfærið.
• Ryksöfnun: Always connect the sander to a dust collection system to minimize airborne dust and maintain a clear workspace.

3. Íhlutir og stjórntæki

Familiarize yourself with the various parts of the sander before operation.

Figure 2: Key Components of the JSG-6DC Sander

This diagram illustrates the main components of the sander, including the 6" x 48" belt, 12" disc, 1-1/2 HP motor, quick-release belt tension lever, dual thumbscrew belt tracking adjustment, positive stops at 45° & 90°, and the 4" dust port.

• Beltisslípunararmur: Holds the 6" x 48" abrasive belt. Can be adjusted for horizontal, vertical, or angled sanding.
• Disc Sanding Plate: The 12" diameter disc for flat sanding operations.
• Vinnuborð: Two precision-ground cast iron tables, one for the belt and one for the disc, with miter gauge slots.
• Mitra mælir: Used with the work tables for accurate angle sanding.
• Rofi: ON/OFF switch located on the motor housing.
• Rykhöfn: 4-inch diameter port for connecting to a dust collection system.
• Aðlögun beltismælingar: Dual thumbscrews for precise alignment of the sanding belt.
• Belt Tension Lever: Quick-release lever for easy belt changes.

4. Uppsetning og samsetning

Upptaka og skoðun:

Carefully remove the sander and all components from the packaging. Inspect for any shipping damage. Report any damage immediately to your dealer.

Staðsetning:

Place the sander on a sturdy, level workbench or an optional stand. Ensure adequate space around the machine for safe operation and material handling.

Rafmagnstenging:

• The JSG-6DC is prewired for 115V operation. It can be rewired for 230V by a qualified electrician if needed.
• Gakktu úr skugga um að aflgjafinn passi við voltage requirements of the sander.
• Connect the sander to a grounded outlet.

Dust Collection System Connection:

Connect a 4-inch dust collection hose to the dust port located at the rear of the sander base. Proper dust collection is crucial for safety and machine longevity.

Figure 3: 4-Inch Dust Port

Nærmynd view of the 4-inch dust port, designed for connecting to an external dust collection system to manage sanding debris.

5. Rekstur

Byrja og stöðva:

• To start the sander, press the green "ON" button.
• To stop the sander, press the red "OFF" button.

Notkun beltisslípvélarinnar:

• Belt Arm Adjustment: The belt arm can be positioned from horizontal to vertical. Loosen the locking knob, adjust the arm to the desired angle, and tighten the knob securely.
• Beltamælingar: Use the dual thumbscrew belt tracking adjustment to ensure the belt runs centrally on the rollers. Adjust while the sander is running (briefly) until the belt tracks correctly.


Figure 4: Dual Thumbscrew Belt Tracking Adjustment

A close-up of the dual thumbscrews used for precise adjustment of the sanding belt's tracking, ensuring it stays centered during operation.

• Stuðningur við vinnustykki: Utilize the belt work table for supporting your workpiece. The table can be adjusted for angle sanding.

Figure 5: Preset Stops for Work Tables
This image shows the mechanism for setting the work tables with positive stops at 90 and 45 degrees, facilitating accurate angle sanding.
• Slípunartækni: Apply light, even pressure. Move the workpiece smoothly across the belt to prevent uneven sanding and overheating.

Notkun diskaslípvélarinnar:

• Work Table Adjustment: The disc work table can be tilted and locked at various angles, with positive stops at 90 and 45 degrees.

Figure 6: Precision-Ground Cast Iron Tables
A view of the robust cast iron work tables, highlighting their precision-ground surface for stable and accurate workpiece support during sanding.
• Mitra mælir: Insert the miter gauge into the table slot for precise angle sanding on the disc.
• Slípunartækni: Slípið alltaf á þeirri hlið disksins sem snýr niður (vinstri hlið þegar snúið er að diskinum) til að koma í veg fyrir að vinnustykkið kastast til.

6. Viðhald

Regular maintenance ensures optimal performance and extends the life of your sander. Always disconnect power before performing any maintenance.

Þrif:

• After each use, clean dust and debris from the machine, especially around the motor vents, belt, and disc areas.
• Use compressed air or a brush. Do not use solvents that may damage plastic parts.

Beltiskipti:

• Aftengdu rafmagnið.
• Release the quick-release belt tension lever.
• Remove the old belt and install the new 6" x 48" belt, ensuring the directional arrow on the belt matches the arrow on the machine.
• Re-engage the tension lever and adjust belt tracking.

Skipti á diski:

• Aftengdu rafmagnið.
• Remove the quick-lock dust cover for access to the disc.
• Peel off the old adhesive-backed 12" sanding disc.
• Clean the disc plate thoroughly before applying a new disc.
• Align and firmly press the new disc onto the plate.

Figure 7: Graphite-Covered Steel Platen

Nærmynd view of the graphite-covered steel platen, which helps reduce friction and heat buildup, extending the life of the sanding belt.

7. Bilanagreining

Þessi kafli fjallar um algeng vandamál sem þú gætir lent í með slípivélinni þinni.

8. Tæknilýsing

Figure 8: Belt and Disc Speeds

This image highlights the operational speeds of the sander: the belt spins at 2,500 SFPM and the disc spins at 1,725 RPM.

9. Ábyrgð og stuðningur

Upplýsingar um ábyrgð:

The JET JSG-6DC Benchtop Belt and Disc Sander is covered by a 5 ára ábyrgðÞessi ábyrgð nær til galla í efni og framleiðslu við eðlilega notkun og þjónustu.

Figure 9: JET 5-Year Warranty

The image displays the official JET 5-Year Warranty logo, indicating the product's coverage period.

For full warranty details, terms, and conditions, please refer to the official JET websíðuna eða hafðu samband við þjónustuver.

Þjónustudeild:

For technical assistance, parts, or service inquiries, please contact JET customer support. Have your model number (JSG-6DC) and serial number ready when contacting support.

Heimsæktu embættismanninn JET verslun á Amazon fyrir frekari upplýsingar og fylgihluti fyrir vöruna.