1. Inngangur og yfirview
Thank you for choosing the CASIO DQD-80J-8JF Digital Radio Alarm Clock. This device is designed to provide accurate timekeeping through radio wave reception, along with convenient features such as a temperature display, alarm with snooze, and an LED backlight. This manual will guide you through the setup, operation, and maintenance of your new clock.

Mynd 1: Framan view of the CASIO DQD-80J-8JF Digital Radio Alarm Clock. The large LCD display shows the current time, date, and indoor temperature. Buttons for operation are located on the front panel for easy access.
2. Vörueiginleikar
- Radio-Controlled Timekeeping: Automatically corrects time by receiving standard radio waves (supports 2 stations for automatic selection).
- Stafrænn skjár: Large, easy-to-read LCD display for time, date, and temperature.
- Electronic Alarm: Features an electronic alarm sound that changes in 5 stages for effective waking.
- Blunda aðgerð: Allows for repeated alarms, approximately every 5 minutes, up to 7 times.
- LED baklýsing: Provides illumination for easy viewvið aðstæður við litla birtu.
- Full sjálfvirk dagatal: Displays month, day, and day of the week, automatically adjusting for leap years.
- 12/24 tíma skjár: User-selectable time format.
- Hitaskjár: Sýnir núverandi hitastig innandyra.
- Comfort Mark Function: Indicates with a mark when the temperature is within ±2℃ of a user-defined comfortable range.
- Front Operation: All primary operation buttons are conveniently located on the front panel.
3. Uppsetning
3.1. Uppsetning rafhlöðu
- Opnaðu hlífina á rafhlöðuhólfinu sem er aftan á tækinu.
- Insert two (2) AA size batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Lokaðu rafhlöðuhólfinu tryggilega.
Athugið: The clock comes with monitor batteries. These may have a shorter lifespan than standard batteries. Replace them with new alkaline batteries for optimal performance.
3.2. Initial Time Setting (Radio Wave Reception)
After battery installation, the clock will automatically attempt to receive radio waves to set the correct time. Place the clock in a location where radio wave reception is good, typically near a window and away from electronic devices that may cause interference.
- The clock will display a reception indicator during this process.
- Once successful, the time and date will be automatically adjusted. This may take several minutes.
3.3. Manual Time Setting (If Radio Reception Fails)
If the clock fails to receive radio waves or if you are in an area with poor reception, you can set the time manually.
- Ýttu á og haltu inni MODE button (location may vary, refer to diagram in full manual) until the time digits begin to flash.
- Notaðu STILLA or + / - hnappa til að stilla klukkustundina.
- Ýttu á MODE again to move to the minute setting, then use STILLA or + / - að stilla fundargerðirnar.
- Repeat this process for setting the year, month, and day.
- Ýttu á MODE í síðasta sinn til að fara úr stillingarham.
4. Notkunarleiðbeiningar
4.1. Stilla vekjarann
- Ýttu á VARMARASETT button (usually on the front or side). The alarm time will appear and flash.
- Notaðu STILLA or + / - hnappana til að stilla vekjaraklukkutíma sem óskað er eftir.
- Ýttu á VARMARASETT again to move to the minute setting, then use STILLA or + / - að stilla fundargerðirnar.
- Ýttu á VARMARASETT one last time to confirm and exit.
- To activate or deactivate the alarm, use the ALARM ON / OFF switch or button. An alarm indicator will appear on the display when activated.
4.2. Notkun á blundaraðgerðinni
Þegar vekjarinn hringir ýtirðu á SNOOZE / LIGHT button. The alarm will temporarily stop and sound again after approximately 5 minutes. This can be repeated up to 7 times.
4.3. Activating the LED Light
Ýttu á SNOOZE / LIGHT button to illuminate the display with an LED backlight for a few seconds.
4.4. Switching 12/24 Hour Display
Ýttu á 12/24H button (or a combination of buttons, refer to specific model instructions) to toggle between 12-hour (with AM/PM indicator) and 24-hour time formats.
4.5. Understanding the Comfort Temperature Display
The clock displays the current indoor temperature. You can set a preferred temperature range. When the ambient temperature falls within ±2℃ of your set comfort temperature, a special comfort mark icon will appear on the display, indicating ideal conditions.
5. Viðhald
5.1. Skipt um rafhlöðu
When the display becomes dim or the clock stops functioning, it is time to replace the batteries. Follow the steps in Section 3.1. Always replace both batteries at the same time with new ones of the same type (AA alkaline).
5.2. Þrif á einingunni
Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the casing eða skjá.
5.3. Geymsla
If you do not plan to use the clock for an extended period, remove the batteries to prevent leakage and damage to the unit.
6. Bilanagreining
- Rangt tímastig:
Ensure the clock is placed in an area with good radio wave reception. Try initiating manual reception (refer to full manual for specific button combination). If still incorrect, set the time manually as described in Section 3.3. - Engin móttaka útvarpsmerkja:
Move the clock closer to a window or to a different room. Avoid placing it near large metal objects, electronic devices (TVs, computers, mobile phones), or in concrete buildings which can block signals. - Viðvörun hringir ekki:
Check if the alarm is activated (alarm indicator on display). Ensure the alarm time is set correctly. - Dimmur skjár:
Skiptu um rafhlöður fyrir nýjar. - Temperature Reading Appears Incorrect:
Ensure the clock is not placed in direct sunlight, near heat sources, or in drafts, which can affect the sensor.
7. Tæknilýsing
| Gerðarnúmer | DQD-80J-8JF |
| Vörumerki | CASIO |
| Product Dimensions (H×W×D) | 73 × 96 × 58 mm |
| Þyngd aðaleininga | 130g |
| Efni | Plast |
| Skjár Tegund | Stafræn |
| Hreyfing | Útvarpsstýrður |
| Aflgjafi | 2 x AA rafhlöður |
| Gerð viðvörunar | Electronic sound (5-stage breyting) |
| Lengd blundar | Approx. 5 minutes (up to 7 repetitions) |
| Baklýsing | LED ljós |
| Dagatal | Full Auto Calendar (Month, Day, Day of Week) |
| Sýnasvið hitastigs | Specific range not provided, typically 0°C to 40°C (32°F to 104°F) |
| Upprunaland | Kína |
8. Ábyrgð og stuðningur
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official CASIO websíðuna. Þú getur einnig fundið frekari upplýsingar á CASIO Store on Amazon.





