KOHLER Margaux Rite-Temp Bath and Shower Faucet Trim with Lever Handle Instruction Manual

Inngangur

This manual provides detailed instructions for the installation, operation, and maintenance of your KOHLER Margaux Rite-Temp Bath and Shower Faucet Trim with Lever Handle (Model K-T16233-4-BN). Please read all instructions carefully before beginning installation to ensure proper function and to avoid injury or product damage. Keep this manual for future reference.

Mikilvægar öryggisupplýsingar

• Lokaðu alltaf fyrir aðalvatnsrennslið áður en þú setur upp eða þjónustar kranann.
• Notið viðeigandi persónuhlífar, svo sem öryggisgleraugu, við uppsetningu.
• Ef þú ert óviss um einhvern hluta uppsetningarferlisins skaltu ráðfæra þig við hæfan pípulagningamann.
• Ensure all local plumbing and building codes are followed.
• Ekki herða tengingarnar of mikið, því það getur valdið skemmdum.

Required Rite-Temp® Valve System

This faucet trim requires a 1/2" pressure-balancing valve with a push-button diverter. For optimal performance, ensure you select the correct valve for your shower trim application.

Mynd: Selection guide for KOHLER Rite-Temp Valve Systems. The K-11748-K-NA valve is typically used in residential applications. The K-11748-KS-NA valve includes screwdriver stops for water shut-off during service or maintenance and is typically used in hospitality or multi-family applications.

• K-11748-K-NA: Typically used in residential applications.
• K-11748-KS-NA: Includes screwdriver stops, allowing water to be shut off at the valve for service or maintenance. Typically used in hospitality or multi-family applications.

Uppsetningarleiðbeiningar

1. Undirbúðu uppsetningarsvæðið: Ensure the rough-in valve (e.g., K-11748-K-NA or K-11748-KS-NA) is correctly installed according to its specific instructions and local plumbing codes. The valve body should be securely mounted and plumb.
2. Install the Trim Plate: Apply a bead of silicone sealant around the back of the trim plate to create a watertight seal against the finished wall. Position the trim plate over the valve body and secure it with the provided screws.
3. Install the Handle Assembly: Attach the handle adapter to the valve stem. Align the lever handle with the adapter and secure it with the set screw, typically located on the underside of the handle.
4. Install the Showerhead and Tub Spout: Thread the shower arm into the wall fitting and then attach the showerhead. For the tub spout, apply thread sealant to the pipe threads and screw the spout onto the pipe, ensuring it is properly aligned and tightened.
5. Próf fyrir leka: Turn on the main water supply and check all connections for leaks. Operate the faucet handle to ensure proper water flow and temperature control.

Note: Specific installation steps may vary slightly depending on the rough-in valve model and your specific plumbing configuration. Always refer to the detailed instructions provided with your KOHLER Rite-Temp valve.

Operating Your Faucet Trim

• Kveikt/slökkt: Rotate the lever handle to turn the water on or off.
• Hitastýring: Rotate the lever handle to adjust the water temperature. Typically, rotating counter-clockwise increases hot water, and clockwise increases cold water.
• Aðgerð fráleiðara: The Rite-Temp valve system includes a push-button diverter. Pull the button to divert water flow from the tub spout to the showerhead. Push the button back in to return water flow to the tub spout.

Umhirða og viðhald

To maintain the finish and performance of your KOHLER faucet trim, follow these guidelines:

• Þrif: Clean the faucet trim with a soft, damp klút. Forðist slípiefni, sterk efni eða skúringarsvampa, þar sem þau geta skemmt áferðina.
• Spot Removal: Fyrir þrjósk bletti skal nota milda sápu og vatnslausn, skola síðan vandlega og þurrka með mjúkum klút.
• Avoid Wax-Based Cleaners: Do not use cleaners containing wax, as they can build up and dull the finish.
• Showerhead Cleaning: Periodically clean the showerhead nozzles to remove mineral deposits. Many KOHLER showerheads feature flexible nozzles that can be rubbed to dislodge deposits.

Úrræðaleit

Tæknilýsing

• Vörumerki: Kohler
• Gerðarnúmer: T16233-4-BN
• Litur: Líflegt burstað nikkel
• Efni: Brass (Handle Material), Nickel (Faucet Material)
• Ljúka gerð: Burstað
• Fjöldi handföng: 1
• Gerð festingar: Veggfesting
• Þyngd hlutar: 5 pund
• Innifalið íhlutir: Margaux Rite-Temp Bath and Shower Faucet Trim with Lever Handle
• UPC: 650531483454

Product Features Video: Katalyst Air-Induction Spray

Ábyrgð og stuðningur

This KOHLER product is covered by a Lífstíma takmörkuð ábyrgð. For detailed warranty information, service, or technical support, please contact KOHLER customer service directly. You can find contact information on the official KOHLER webvefsíðunni eða með því að vísa til fylgigagna sem fylgja vörunni þinni.