Bogen BPA60 Power Amplíflegri notendahandbók

1. Vöru lokiðview

The Bogen BPA60 is a robust solid-state power amplifier engineered for professional and commercial sound system applications. It delivers a continuous 60 watts RMS output, ensuring high-quality audio amplification. This amplifier is designed for reliable performance across various audio environments.

Mynd 1: Framan view of the Bogen BPA60 Power Amplíflegri. The amplifier features a black chassis with a white border around the central panel, a red power switch, and the Bogen logo on the right side. The model number "MODEL BPA 60" is visible on the left.

2. Helstu eiginleikar

• Úttaksstyrkur: 60 watts RMS output.
• Sveigjanleiki í inntaki: Features 1 input Hi Z unbalanced, compatible with an accessory transformer (TL600) for Lo Z balanced input.
• Úttaksvalkostir: Supports 8 ohm, 25V, 16 ohm, 25VCT, and 70V outputs.
• Hljóðgæði: Provides continuous high-quality sound with total harmonic distortion less than 2% at rated output from 50Hz to 15 kHz.
• Stýringar: Includes an input level control and a lo-cut filter switch for audio shaping.

3. Innihald pakka

Upon opening the package, verify that all components are present and undamaged. The standard package for the Bogen BPA60 Power Amplifier inniheldur:

• Bogen BPA60 Power Amplifier Eining

Athugið: Any additional accessories, such as the TL600 accessory transformer, are sold separately unless specified by your vendor.

4. Öryggisupplýsingar

Before operating the Bogen BPA60 Power Amplifier, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or damage to the unit.

• Aflgjafi: Tengdu við ampeingöngu við tilgreindan aflgjafatage eins og tilgreint er á tækinu.
• Loftræsting: Tryggið næga loftræstingu í kringum tækið. Ekki loka fyrir loftræstiop.
• Raki: Ekki láta tækið verða fyrir rigningu eða raka. Ekki setja hluti sem eru fylltir með vökva, eins og blómavös, ofan á tækið.
• Þjónusta: Látið hæft þjónustufólk sjá um alla þjónustu. Reynið ekki að gera við þessa vöru sjálfur.
• Jarðtenging: Gakktu úr skugga um að tækið sé rétt jarðtengt til að koma í veg fyrir rafstuð.

5. Uppsetning og uppsetning

Proper setup is crucial for optimal performance and safety. Follow these steps for installing your BPA60 amplíflegri:

1. Staðsetning: Settu amplifier on a stable, flat surface with sufficient clearance for ventilation. Avoid placing it near heat sources or in direct sunlight.
2. Rafmagnstenging: Tryggðu að amplifier's power switch is in the OFF position. Connect the power cord securely to the amplifier's power inlet and then to a suitable AC power outlet.
3. Inntakstenging: Connect your audio source (e.g., mixer, pre-amplifier) ​​til amplifier's input. The BPA60 features a Hi Z unbalanced input. For Lo Z balanced input, an optional TL600 accessory transformer is required.
4. Úttakstenging: Connect your speakers or audio distribution system to the amplifier's output terminals. The BPA60 supports 8 ohm, 25V, 16 ohm, 25VCT, and 70V outputs. Ensure correct impedance matching for your speakers.
5. Fyrstu athuganir: Before powering on, double-check all connections to ensure they are secure and correctly wired.

For detailed wiring diagrams, please refer to the full technical specifications or consult a qualified audio technician.

6. Notkunarleiðbeiningar

Einu sinni sem amplifier is properly set up, follow these steps to operate it:

1. Kveikt á: Flip the power switch on the front panel to the 'ON' position. The power indicator light should illuminate.
2. Stilling inntaksstigs: Slowly adjust the input level control knob to achieve the desired volume. Start with a low setting and gradually increase it to prevent sudden loud sounds.
3. Lo-Cut sía: If desired, engage the lo-cut filter switch to reduce low-frequency rumble or feedback. This can be useful in certain acoustic environments.
4. Eftirlit: Monitor the audio output to ensure clarity and prevent distortion. If distortion occurs, reduce the input level.
5. Slökkva á: When finished, turn the input level down to minimum, then flip the power switch to the 'OFF' position.

Gakktu alltaf úr skugga um að amplifier is turned off before making any changes to input or output connections.

7. Viðhald

Regular maintenance helps ensure the longevity and optimal performance of your Bogen BPA60 amplíflegri.

• Þrif: Notaðu mjúkan, þurran klút til að þrífa ytra byrðina ampEkki nota fljótandi hreinsiefni eða úðabrúsa, þar sem þau geta skemmt áferðina eða innri íhluti.
• Loftræsting: Periodically check that the ventilation openings are clear of dust and debris. Blocked vents can lead to overheating.
• Tengingar: Occasionally inspect all input and output connections for looseness or corrosion. Re-secure any loose connections.
• Geymsla: Ef geymt er amplifier for an extended period, ensure it is in a cool, dry place, away from direct sunlight and extreme temperatures.

Varúð: Ekki opna ampléttari casing. Það eru engir hlutar inni í því sem notandinn getur gert við. Að opna casing voids the warranty and exposes you to dangerous voltages.

8. Bilanagreining

This section provides solutions to common issues you might encounter with your BPA60 amplifier. If the problem persists, contact Bogen customer support.

9. Tæknilýsing

Detailed technical specifications for the Bogen BPA60 Power Amplíflegri:

• Gerðarnúmer: BPA60
• Úttaksstyrkur: 60 Watt RMS
• Tíðnisvörun: 50 Hz - 15 kHz
• Total Harmonic Distortion (THD): Innan við 2% við matsframleiðslu
• Inntak: 1 x Hi Z unbalanced (accessory TL600 transformer for Lo Z balanced)
• Úttak: 8 ohm, 25V, 16 ohm, 25VCT, 70V
• Stýringar: Input Level, Lo-Cut Filter Switch
• Mál (L x B x H): 15 x 7.99 x 2.99 tommur (38.1 x 20.3 x 7.6 cm)
• Þyngd: 17 pund (7.7 kg)
• Gerð festingar: Yfirborðsfesting
• Fjöldi rása: 1

10. Upplýsingar um ábyrgð

Bogen products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen webGeymið kaupkvittunina sem sönnun fyrir kaup vegna ábyrgðarkröfu.

11. Þjónustudeild

If you require technical assistance, service, or have questions regarding your Bogen BPA60 Power Amplifier, please contact Bogen customer support. Contact information can typically be found on the Bogen websíðuna eða í vöruumbúðunum.

Bogen Websíða: www.bogen.com

When contacting support, please have your model number (BPA60) and serial number (if applicable) ready.