AudioCodes MP-118

AudioCodes MediaPack MP-118 VoIP Gateway User Manual

Model: MP118/4S/4O/SIP

Vörumerki: AudioCodes

Inngangur

This manual provides comprehensive instructions for the installation, operation, and maintenance of the AudioCodes MediaPack MP-118 Analog VoIP Gateway. The MP-118 is designed to connect traditional analog devices and PSTN/ISDN networks to VoIP services, supporting 4 FXS and 4 FXO analog lines.

Vara lokiðview

AudioCodes MediaPack MP-118 VoIP Gateway, front view með stöðuljósum

Mynd 1: Framan view of the AudioCodes MediaPack MP-118 VoIP Gateway. The front panel features status LEDs for channels, uplink, and power.

The AudioCodes MediaPack MP-118 is a robust analog VoIP gateway, facilitating the integration of legacy telephony equipment with modern IP communication systems. It includes 4 FXS ports for connecting analog phones or fax machines and 4 FXO ports for connecting to PSTN lines or PBX extensions. The device operates on a single 100/10 BaseT Ethernet connection and is powered by an AC power supply.

Uppsetning og uppsetning

Innihald pakka

Að tengja hliðið

  1. Rafmagnstenging: Connect the provided AC power adapter to the gateway's power input and then to a standard electrical outlet.
  2. Nettenging: Connect an Ethernet cable from the gateway's 100/10 BaseT port to your network switch or router.
  3. FXS Port Connection: Connect analog phones, fax machines, or other FXS-compatible devices to the FXS ports (typically labeled 1-4).
  4. FXO Port Connection: Connect PSTN lines or PBX extensions to the FXO ports (typically labeled 5-8).

Upphafleg stilling

Upon initial power-up, the gateway will perform a self-test. Refer to the Í rekstri section for details on LED indicators. Network configuration and SIP registration typically require access to the device's web-based management interface or command-line interface. Consult the full administration guide for detailed configuration steps, including IP address assignment, SIP server registration, and dial plan setup.

Að reka hliðið

LED Vísar

The front panel of the MP-118 features several LED indicators to provide status information:

Basic Call Operations

Once configured, analog devices connected to the FXS ports can make and receive calls via the VoIP network. FXO ports allow calls to be routed between the VoIP network and the PSTN. The gateway supports basic conference call capabilities and multi-line operation, depending on the connected devices and SIP server configuration.

Viðhald

Úrræðaleit

VandamálMöguleg orsökLausn
Engin LED-ljós fyrir aflgjafaRafmagnsbreytir aftengdur eða bilaður.Check power connections. Ensure the adapter is securely plugged into the gateway and a working electrical outlet. Test the outlet with another device.
Uplink LED is offEthernet cable disconnected or network issue.Verify the Ethernet cable is securely connected to both the gateway and the network device. Check network switch/router status. Try a different Ethernet cable.
Analog phone has no dial toneFXS port not connected, not configured, or SIP registration failure.Ensure the phone is correctly plugged into an FXS port. Check the channel status LED. Verify SIP registration status via the gateway's management interface. Consult your VoIP service provider.
Cannot make or receive calls via PSTNFXO port not connected, not configured, or PSTN line issue.Ensure the PSTN line is correctly plugged into an FXO port. Check the channel status LED. Verify FXO port configuration and dial plan settings. Test the PSTN line directly.

Tæknilýsing

EiginleikiSmáatriði
GerðarnúmerMP118/4S/4O/SIP
Analog Ports4 FXS (Foreign Exchange Subscriber) for analog devices, 4 FXO (Foreign Exchange Office) for PSTN/PBX lines
VoIP samskiptareglurSIP (Session Initiation Protocol), MGCP, H.323
Ethernet tengiSingle 100/10 BaseT
AflgjafiCorded Electric (AC Power Supply)
Mál (L x B x H)8.66 x 6.77 x 1.65 tommur (220 x 172 x 42 mm)
Þyngd1.1 pund (500 grömm)
Samhæf tækiVoIP services, PSTN/ISDN networks, analog devices (phones, fax machines, answering machines), computer systems
SímafundarmöguleikarBasic
FjöllínuaðgerðStuðningur

Upplýsingar um ábyrgð

AudioCodes products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official AudioCodes webGeymið kaupkvittunina vegna ábyrgðarkröfu.

Þjónustudeild

For technical assistance, advanced configuration guides, or further support, please visit the official AudioCodes support portal or contact their customer service department. You may find additional resources, FAQs, and software downloads on their websíða.