Inngangur
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the Testo 400563 4354 IAQ Kit. This device is designed for simple and intuitive operation for reading, saving, and analyzing ventilation and indoor air quality parameters, including Relative Humidity (RH), Temperature, Carbon Dioxide (CO2), and Barometric Pressure.
Öryggisupplýsingar
Please read this section carefully before operating the device. Failure to comply with these instructions may result in injury or damage to the instrument.
- Always operate the device within its specified operating temperature and humidity ranges.
- Do not expose the device to extreme temperatures, direct sunlight, or corrosive environments.
- Forðist að missa tækið eða láta það verða fyrir miklum höggum.
- Only use specified batteries and dispose of them properly.
- Reynið ekki að opna eða gera við tækið sjálfur. Látið hæft starfsfólk sjá um alla þjónustu.
- Haltu tækinu hreinu og lausu við ryk og rusl.
Vara lokiðview
The Testo 400563 4354 IAQ Kit is a versatile instrument for environmental measurements. Familiarize yourself with its components:
Mynd 1: Testo 435-4 IAQ Meter. This image displays the handheld meter, featuring a large digital display at the top showing readings like "1037 ppm" and "934.4 m³/h". Below the screen are several control buttons: three orange circular buttons at the top, followed by two grey arrow buttons (up and down), another grey circular button, and finally a power button with a power symbol. The device has a sleek, ergonomic design with a black body and silver-colored accents.
Lykilhlutir:
- Skjár: Large LCD for clear reading of measurement values and menu navigation.
- Stjórnhnappar: Intuitive buttons for power, navigation, selection, and function activation.
- Inntak skynjara: Port for connecting various probes (e.g., CO2, humidity, temperature).
- Rafhlöðuhólf: Located at the rear for power supply.
Uppsetning
1. Uppsetning rafhlöðu:
- Finndu rafhlöðulokið aftan á tækinu.
- Open the cover by sliding or unscrewing it (refer to specific model instructions if screws are present).
- Insert the required batteries (e.g., AA or AAA, typically 3 or 4) ensuring correct polarity (+/-).
- Lokaðu rafhlöðuhólfinu tryggilega.
2. Tenging við rannsakanda:
- Connect the desired measurement probe (e.g., CO2 probe, humidity/temperature probe) to the designated input port on the device.
- Ensure the connection is firm and secure to prevent inaccurate readings.
Notkunarleiðbeiningar
1. Kveikt/slökkt:
- Til að kveikja á, haltu inni Kraftur button (usually marked with Ⓢ) þar til skjárinn lýsist upp.
- Haltu inni til að slökkva á Kraftur hnappinn aftur þar til skjárinn slokknar.
2. Að taka mælingar:
- Once powered on and a probe is connected, the device will typically display real-time measurements for the connected parameters (e.g., CO2 in ppm, Temperature in °C/°F, RH in %).
- Position the probe in the environment you wish to measure. Ensure proper air circulation around the sensor for accurate readings.
- Allow a few moments for readings to stabilize, especially for CO2 and humidity.
3. Navigating Menus and Saving Data:
- Notaðu Upp/niður arrow buttons to navigate through different measurement modes or menu options.
- Ýttu á Sláðu inn/Í lagi button (often a central circular button) to select an option or confirm a setting.
- To save a measurement, look for a Vista or Minni button/option. Follow the on-screen prompts to store data.
- To recall saved data, navigate to the Minni or Muna valmynd.
Viðhald
1. Þrif:
- Þurrkaðu tækið casing með mjúkum, damp klút. Ekki nota slípiefni eða leysiefni.
- Ensure no liquid enters the sensor openings or electrical connections.
- For probes, follow specific cleaning instructions provided with the probe itself.
2. Skipt um rafhlöðu:
- Skiptu um rafhlöður þegar vísirinn fyrir lága rafhlöðu birtist á skjánum.
- Always use new batteries of the specified type.
- Fargið gömlum rafhlöðum samkvæmt gildandi reglum.
3. Kvörðun:
- Regular calibration is essential for maintaining measurement accuracy.
- Refer to the device's on-screen calibration menu or consult Testo's official support for recommended calibration intervals and procedures.
- Some probes may require specific calibration gases or humidity standards.
Úrræðaleit
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Ekki kveikir á tækinu. | Rafhlöður sem eru tómar eða rangt settar í. | Check battery polarity; replace with new batteries. |
| Ónákvæmar lestrar. | Sensor dirty, damaged, or out of calibration; improper probe connection. | Clean sensor; ensure probe is securely connected; perform calibration. |
| Skjárinn sýnir „Villa“ eða „---“. | Sensor malfunction; out of measurement range; internal error. | Check probe connection; move to an environment within measurement range; restart device; contact support if persistent. |
| Cannot save data. | Memory full; incorrect save procedure. | Delete old data; refer to operating instructions for saving data. |
Tæknilýsing
The following specifications are for the Testo 400563 4354 IAQ Kit:
- Vörutegund: CO2/Temp/RH/Barometric Meter
- Gerð: 400563 4354
- Vörumerki: Testo
- Hlutanúmer: AO-10382-23
- Magn pakka: HVERT
- Stærðir pakka: 16.3 x 13 x 4.3 tommur; 8.2 pund
- ASIN: B00481RUUA
- Fyrsta fáanlegt: 18. júlí 2012
Note: Specific measurement ranges and accuracies depend on the probes used with the device. Refer to individual probe documentation for detailed specifications.
Ábyrgð og stuðningur
For warranty information, technical support, or service inquiries, please contact Testo customer service or visit their official websíða.
Þú getur fundið frekari upplýsingar og upplýsingar um tengiliði á Testo verslun á Amazon.
