1. Inngangur
This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.
Innihald pakka
Gakktu úr skugga um að allir hlutir sem taldir eru upp hér að neðan séu innifaldir í pakkanum þínum:
- InFocus IN116 Projector
- Rafmagnssnúra
- RGB snúru
- A / V kapall
- Öryggisleiðbeiningar
- Notendahandbók (þetta skjal)
- Fjarstýring
- HDMI snúru
2. Vöru lokiðview
The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.
Helstu eiginleikar
- WXGA (1280 x 800) Native Resolution
- 2700 ANSI Lumens (2200 lumens in Eco Mode)
- 3000: 1 Andstæða hlutfall
- 3D-Ready functionality
- HDMI tenging
- Langvarandi lamp til lengri notkunar
- Easy maintenance with no filters to replace
Skjávarpa íhlutir
Mynd 1: Efst View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.
Mynd 2: Hlið View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.
Mynd 3: Framan View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.
Mynd 4: Aftan View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.
3. Uppsetningarleiðbeiningar
Staðsetning
Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.
Tengist við aflgjafa
- Tengdu rafmagnssnúruna við rafmagnsinntak skjávarpans.
- Stingdu hinum enda rafmagnssnúrunnar í jarðtengda rafmagnsinnstungu.
Tenging myndbandsgjafa
The IN116 projector offers multiple input options:
- HDMI: For digital video and audio. Connect an HDMI cable from your source device to the projector's HDMI port.
- VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
- Samsett myndband: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
- S-myndband: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.
For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.
4. Notkunarleiðbeiningar
Kveikt/slökkt
- Til að kveikja á, ýttu á Kraftur hnappinn á stjórnborði skjávarpans eða fjarstýringunni. Rafmagnsljósið mun kvikna.
- Til að slökkva á, ýttu á Kraftur button twice. The projector will enter a cooling cycle before shutting down completely.
Að velja inntaksgjafa
Ýttu á Heimild button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.
Að stilla myndina
- Fókus: Snúðu fókushringnum á linsunni á skjávarpanum þar til myndin er skörp og skýr.
- Aðdráttur: Stilltu aðdráttarhringinn á linsunni á skjávarpanum til að breyta myndastærðinni.
- Keystone leiðrétting: If the image appears trapezoidal, use the keystone correction function (usually found in the OSD menu or via dedicated buttons on the remote) to square the image.
- Myndastillingar: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.
Eco Mode
Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.
3D virkni
The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.
Video 1: InFocus IN110xv Series Overview. Þetta myndband veitir almenna yfirsýnview of the InFocus IN110xv series projectors, which includes the IN116 model. It highlights features such as lamp life, resolution options (including WXGA for IN116), brightness, vivid color technology, and 3D readiness. This video is provided by InFocus Corporation.
5. Viðhald
Lamp Skipti
Myndvarpi lamp hefur takmarkaðan líftíma. Þegar lamp Ef vísirljósið lýsir eða birta myndarinnar minnkar verulega er kominn tími til að skipta um það.amp. Hinn lamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.
- Power off the projector and disconnect the power cord.
- Allow the projector to cool down completely (at least 30 minutes).
- Finndu og opnaðu lamp door on the top of the projector.
- Fjarlægðu gamla l varlegaamp mát.
- Settu upp nýja lamp eininguna og vertu viss um að hún sé örugglega fest.
- Lokaðu lamp door and reconnect the power cord.
- Endurstilltu lamp tímastillirinn í OSD valmynd skjávarpans.
Varúð: Skjávarpa lamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.
Þrif
- Að utan: Notaðu mjúkan, damp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
- Linsa: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
- Síur: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.
6. Bilanagreining
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Engin mynd sýnd |
|
|
| Myndin er óskýr |
|
|
| Skjávarpinn ofhitnar og slokknar á sér |
|
|
| HDMI picture has a blue tint |
|
|
7. Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Gerðarnúmer | IN116 |
| Skjátækni | DLP |
| Innfæddur upplausn | WXGA (1280 x 800) |
| Birtustig | 2700 ANSI Lumens (2200 lumens Eco Mode) |
| Andstæðuhlutfall | 3000:1 |
| Lamp Líf (Venjulegt/Vinsamlegt) | 5,000 klst / 6,000 klst |
| Tengitækni | HDMI, VGA (x2), Composite Video, S-Video, Audio In (3.5mm), Audio Out (3.5mm), RS232C, USB B Mini |
| Sérstakur eiginleiki | 3D-tilbúin |
| Vörumál | 12.75 x 12.75 x 5.5 tommur |
| Þyngd hlutar | 4.78 pund (2.17 kg) |
| Framleiðandi | Upplýsingar |
| Dagsetning fyrst í boði | 1. maí 2011 |
8. Ábyrgð og stuðningur
Takmörkuð ábyrgð
All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:
- Myndvarpi: 5 ára takmörkuð ábyrgð
- Varahlutir og vinnu: 2 árs full ábyrgð
- Lamp: 6 mánaða ábyrgð
For detailed terms and conditions of the warranty, please refer to the official InFocus websíðuna eða hafðu samband við þjónustuver.
Þjónustudeild
For technical assistance, troubleshooting, or warranty claims, please contact InFocus customer support. Visit the official InFocus webvefsíða fyrir tengiliðaupplýsingar og frekari úrræði.
Opinber Websíða: www.infocus.com
