Neewer Pro Battery Grip for Nikon D5100 D5200 D5300 DSLR Camera

1. Inngangur

This Neewer Pro Battery Grip is designed to enhance the functionality and handling of your Nikon D5100, D5200, or D5300 DSLR camera. It allows for the use of two EN-EL14 Li-ion batteries, effectively doubling your camera's battery capacity and extending shooting time. The grip also features a vertical shutter release button, providing improved ergonomics and stability for vertical photography.

2. Innihald pakka

Vinsamlegast staðfestu að allir hlutir séu í pakkanum þínum:

• 1 x Neewer Pro Battery Grip for Nikon D5100/D5200/D5300
• 1 x Signal-Transferring Cable

3. Vöru lokiðview

Familiarize yourself with the components of your battery grip:

Figure 3.1: Battery Grip Components. This image illustrates the key parts of the battery grip, including the Electrode Contacts, Connection Screw, Battery Tray Holder, and Attach/Detach Knob.

• Electrode Contacts: These connect the grip to your camera's battery compartment.
• Connection Screw: Used to securely attach the battery grip to the camera's tripod socket.
• Battery Tray Holder: The compartment where EN-EL14 batteries are inserted.
• Attach/Detach Knob: Used to loosen or tighten the grip's connection to the camera.
• ON/OFF rofi: Controls the power supply from the grip to the camera.
• Vertical Shooting Shutter Button: Provides a convenient shutter release for vertical orientation.
• 1/4 skrúfugat: Located at the bottom, suitable for mounting the camera and grip onto a tripod.

Figure 3.2: Tripod Mount. This image shows the 1/4 inch screw hole on the bottom of the grip, allowing for tripod attachment.

4. Uppsetning

Follow these steps to install the battery grip onto your camera:

1. Remove Camera Battery Door: Carefully open your camera's battery compartment and remove the battery door. This door typically slides out or detaches by pulling it at a 45-degree angle. The battery grip often includes a storage slot for this door to prevent loss.
2. Insert Batteries into Grip: Open the battery tray holder on the grip. Insert one or two EN-EL14 Li-ion batteries into the tray, ensuring correct polarity. Close the battery tray securely.
3. Attach Grip to Camera: Align the battery grip's electrode contacts with your camera's battery compartment. Slide the grip into place and then use the connection screw to firmly attach the grip to the camera's tripod socket. Ensure it is tightened sufficiently to prevent movement.
4. Connect Signal-Transferring Cable (Optional): If you intend to use the vertical shutter release button, connect the small signal-transferring cable from the grip to your camera's remote shutter release port.

Figure 4.1: Battery Insertion. This image demonstrates the process of inserting EN-EL14 batteries into the battery grip's tray.

Figure 4.2: Grip Attached to Camera. This image provides front and back views of the battery grip properly installed on a Nikon DSLR camera.

5. Notkunarleiðbeiningar

Once the battery grip is installed, operate it as follows:

• Kveikt/slökkt: Use the ON/OFF switch located on the battery grip to control the power supply from the grip to your camera. Ensure your camera's power switch is also in the 'ON' position.
• Lóðrétt myndataka: For comfortable vertical photography, utilize the dedicated vertical shutter release button on the grip. This button functions identically to your camera's main shutter button when the signal-transferring cable is connected.
• Rafhlöðunotkun: The camera will draw power from the batteries in the grip. When two batteries are installed, the camera will typically use one until depleted, then switch to the second.

Figure 5.1: Key Controls. This image highlights the electrode contacts, ON/OFF switch, connection screw, and the vertical shooting shutter button on the grip.

Figure 5.2: Vertical Shooting. This image demonstrates the ergonomic advantage of the battery grip for vertical photography, providing a more stable hold.

6. Viðhald

To ensure the longevity and optimal performance of your battery grip:

• Þrif: Þurrkið handfangið með mjúkum, þurrum klút. Forðist að nota sterk efni eða slípiefni.
• Geymsla: When not in use for extended periods, remove batteries from the grip and store it in a cool, dry place away from direct sunlight.
• Tengiliðir: Keep the electrical contacts on both the grip and your camera clean and free of dust or debris.

7. Bilanagreining

Ef þú lendir í vandræðum skaltu vísa til eftirfarandi:

• Camera Not Detecting Battery / Battery Error:
  • Ensure batteries are correctly inserted into the grip with proper polarity.
  • Confirm the grip is securely attached to the camera and the connection screw is tightened.
  • Try powering on the camera with an original EN-EL14 battery directly in the camera, then power off, attach the grip with batteries, and power on again.
  • If the error occurs due to camera flex (e.g., adjusting a tripod), power off the camera, re-secure the grip, and power on again.
• Vertical Shutter Release Not Working:
  • Verify that the signal-transferring cable is securely connected between the grip and the camera's remote port.
  • Check your camera's menu settings to ensure the remote control function is enabled and configured correctly (e.g., set to 'photo' mode if applicable, not 'video').

8. Tæknilýsing

9. Ábyrgð og stuðningur

For warranty information or technical support, please contact NEEWER customer service through their official websíðuna eða söluaðilann sem þú keyptir vöruna af. Geymdu kaupkvittunina sem sönnun fyrir kaupunum.