Televes 5363 Multiband Amplíflegri notendahandbók

1. Inngangur

The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.

Helstu eiginleikar:

• Breiðband amplification.
• Incorporates switched-mode power supplies.
• Allows mixing of MATV signals via an independent input.
• Lítið mál: 180 x 110 x 55 mm.
• High-shielding chassis, manufactured from Zamak.
• Aðskilið amplification with very low noise figure, preserving signal quality.
• Ultra-reduced ergonomic design.

Mynd 1: Aftan view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.

2. Öryggisupplýsingar

Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Aflgjafi: Ensure the device is connected to a power outlet with the correct voltage and frequency as specified in the technical specifications.
• Loftræsting: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
• Raki: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp umhverfi.
• Þrif: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
• Þjónusta: Ekki reyna að þjónusta þessa vöru sjálfur. Vísaðu allri þjónustu til viðurkennds þjónustufólks.
• Uppsetning: Ensure the device is securely mounted on a stable surface to prevent it from falling.

3. Innihald pakka

Gakktu úr skugga um að allir hlutir séu til staðar í pakkanum:

• Televes 5363 Multiband Amplíflegri
• Power cable (integrated or separate, depending on model variant)
• Leiðbeiningar (þetta skjal)
• Festingarbúnaður (skrúfur, veggpluggar)

4. Uppsetning og uppsetning

The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:

4.1. Uppsetning Amplíflegri

1. Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
2. Mark the positions for the mounting screws on the wall or surface.
3. Drill pilot holes if necessary and insert wall plugs.
4. Tryggðu þér amplyftaranum með viðeigandi skrúfum.

4.2. Connecting Signals

The amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.

Figure 2: Detail of the input connections and configuration switches on the Televes 5363 amplíflegri.

1. VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
2. SAT inntak: Connect your satellite dish signal cable to the designated SAT input.
3. Framleiðsla: Tengdu úttakið á amplifier to your SMATV distribution network or directly to your television/receiver.

4.3. Rafmagnstenging

Tengdu rafmagnssnúruna við amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.

Mynd 3: Framan view of the Televes 5363 Multiband Amplifier, showing the power input.

5. Rekstur

The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.

5.1. Signal Mixing

The amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.

5.2. Aðlögun hagnaðar

The amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.

6. Viðhald

To ensure optimal performance and longevity of your Televes 5363 Multiband AmpLifier, fylgdu þessum einföldu viðhaldsleiðbeiningum:

• Þrif: Hreinsið reglulega ytra byrði ampÞurrkið af með mjúkum, þurrum klút. Notið ekki slípiefni eða leysiefni.
• Loftræsting: Ensure that the ventilation slots are free from dust and obstructions to prevent overheating.
• Tengingar: Athugið reglulega allar kapaltengingar til að tryggja að þær séu öruggar og lausar við tæringu.
• Umhverfi: Haltu ampGeymið vökvann á þurrum, köldum stað, fjarri beinu sólarljósi og miklum hita.

7. Bilanagreining

If you encounter issues with your Televes 5363 Multiband AmpLifier, vísaðu til eftirfarandi algengra vandamála og lausna:

• Ekkert samband:
  • Check all cable connections to ensure they are properly seated.
  • Staðfestu að amplifier is receiving power (check power indicator light if available).
  • Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
• Weak or Poor Quality Signal:
  • Check the quality of the input signals before they reach the amplíflegri.
  • Ensure all connections are tight and free from damage or corrosion.
  • Staðfestu að amplifier's gain settings (if adjustable) are appropriate for your installation.
• Enginn kraftur:
  • Check the power cable connection to both the amplifier and the electrical outlet.
  • Prófaðu rafmagnsinnstunguna með öðru tæki til að ganga úr skugga um að hún virki.

If the problem persists after attempting these solutions, contact qualified technical support.

8. Tæknilýsingar

9. Ábyrgð og stuðningur

This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes websíða.

For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes websíða.