Sealey RE006 6 stk. soghreinsiefniamp Stilltu notendahandbók

1. Vöru lokiðview

The Sealey RE006 6pc Suction Clamp Set is designed to assist in automotive bodyshop tasks. This set provides a reliable method for securing various components such as panel trims, decals, badges, window trims, and sensors during preparation or while adhesives cure. The clamps feature a non-marking, composite construction and offer adjustable reach and clamping force, ensuring precise and damage-free application.

Figure 1: The Sealey RE006 6pc Suction Clamp Sett.

2. Öryggisupplýsingar

Always observe the following safety precautions when using the Sealey RE006 Suction Clamp Sett:

• Lestu leiðbeiningar: Familiarize yourself with all instructions before use.
• Hreint yfirborð: Ensure surfaces where suction cups are applied are clean, dry, and free from dust, grease, or debris to ensure maximum suction.
• Skoðaðu Clamps: Before each use, inspect the suction cups and clamp mechanisms for any signs of damage or wear. Do not use damaged clamps.
• Forðastu að herða of mikið: Apply appropriate clamping force. Excessive force may damage the clamped item or the clamp sjálft.
• Hitastig: Suction performance may be affected by extreme temperatures. Use in moderate conditions for best results.
• Örugg staðsetning: Ensure the suction cups are firmly attached before applying clampþrýstingur.
• Geymsla: Verslun clampGeymið á hreinum, þurrum stað fjarri beinu sólarljósi og miklum hita.

3. Innihald pakka

The Sealey RE006 6pc Suction Clamp Set includes the following items:

• 6 x Sealey RE006 Suction Clamps (Blue, composite construction)

4. Uppsetning

The Sealey RE006 Suction Clamps are ready for use directly out of the package. No assembly is required. Prior to first use, and before each subsequent use, ensure the following:

1. Hreinsaðu sogskála: Wipe the rubber suction cups with a clean, damp cloth to remove any dust or residue. Allow them to dry completely.
2. Undirbúðu yfirborðið: Gakktu úr skugga um yfirborðið þar sem clamp will be applied is clean, dry, and smooth. Any dirt, oil, or texture can compromise suction.
3. Inspect the Mechanism: Check that the adjustable clamp mechanism operates smoothly and that all components are intact.

5. Notkunarleiðbeiningar

Follow these steps to effectively use the Sealey RE006 Suction Clamps:

1. Settu Clamp: Place the suction cup firmly against the clean, smooth surface of the vehicle panel or window.
2. Virkjaðu sog: Press down on the suction cup to expel air and create a vacuum seal. Ensure the cup is fully adhered.
3. Adjust Reach: Klamp features an adjustable arm. Position the arm to align with the item you wish to secure (e.g., trim, decal, badge).
4. Apply Clamping Force: Use the screw mechanism to gently tighten the clamp, applying sufficient pressure to hold the item in place without causing damage. The non-marking composite construction helps prevent scratches.
5. Monitor During Curing: If used for adhesive setting, periodically check the clamps to ensure they maintain suction and pressure throughout the curing period.
6. Gefa út Clamp: To remove, loosen the screw mechanism, then gently lift the edge of the suction cup to break the vacuum seal.

Mynd 2: Clamps securing a trim on a car door.

Mynd 3: Clamps used to hold a window trim in place.

6. Viðhald

Proper maintenance ensures the longevity and optimal performance of your Sealey RE006 Suction Clamp Sett:

• Þrif: After each use, wipe down the suction cups and clamp bodies with a clean, damp cloth to remove any adhesive residue, dust, or grime. Avoid harsh chemicals that could damage the composite material or rubber.
• Þurrkun: Ensure all parts are completely dry before storage to prevent degradation of materials.
• Geymsla: Geymið clamps in their original packaging or a suitable storage container in a cool, dry place, away from direct sunlight and extreme temperatures. This helps preserve the integrity of the rubber suction cups.
• Smurning: Periodically apply a small amount of silicone-based lubricant to the screw threads of the clamping mechanism to ensure smooth operation.

7. Bilanagreining

8. Tæknilýsing

9. Ábyrgð og stuðningur

For information regarding warranty coverage, product support, or spare parts, please contact Sealey customer service directly or refer to the official Sealey webvefsíða. Geymið kaupkvittunina sem sönnun fyrir kaupunum.

Upplýsingar um Sealey:

• Sealey Official Websíða
• Refer to product packaging for specific contact details or regional support numbers.