Inngangur
The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.
Vara lokiðview
The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:
- DECAY hnappur: Stýrir lengd endurómshalans.
- TONE hnappur: Adjusts the brightness or darkness of the reverb.
- MIX hnappur: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
- Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
- Fótrofi: Virkar eða framhjá áhrifunum.
- Inntak / útgangstengi: For connecting your instrument and amplíflegri.
- Rafmagnsinntak: For connecting a 9V DC power supply.
Uppsetning
- Rafmagnstenging: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
- Tækjatenging: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- AmpLiifier Tenging: Tengdu úttaksinnstunguna vinstra megin á pedalanum við þinn ampInntak liftara með venjulegri 1/4 tommu tækjasnúru.
- Stereo Operation (Optional): For stereo output, connect the second output jack to a second amplifier or stereo input device.
Gakktu úr skugga um að allar tengingar séu öruggar áður en þú kveikir á tækinu amplyftari og pedali.
Notkunarleiðbeiningar
Grunnaðgerð
- Kveikt á: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
- Að velja gerð eftirklangs: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
- Adjusting Reverb Parameters:
- Notaðu RÖNNUN knob to control the duration of the reverb.
- Notaðu TÓN knob to adjust the frequency content of the reverb, making it brighter or darker.
- Notaðu BLANDA knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.
TonePrint Feature
The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.
Viðhald
- Þrif: Notið mjúkan, þurran klút til að þrífa ytra byrði pedalsins. Forðist slípiefni eða leysiefni.
- Skipt um rafhlöðu: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
- Geymsla: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.
Úrræðaleit
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Ekkert hljóð eða veikt merki | Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp hafnaði. | Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately. |
| Óæskilegur hávaði eða suð | Ground loop, faulty cables, interference from other electronics, improper power supply. | Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices. |
| Effect not engaging (LED off) | Enginn rafmagn, bilaður fótrofi. | Verify power connection and battery status. If problem persists, contact support. |
| TonePrint not loading | Incorrect app usage, connection issues. | Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance. |
Tæknilýsing
- Gerð: T2
- Þyngd hlutar: 1 pound (approximately 454 grams)
- Vörumál: 4.61 x 2.48 x 2.91 tommur (11.7 x 6.3 x 7.4 cm)
- Aflgjafi: 9V DC (center negative) power adapter or 9V battery
- Voltage: 9 volt
- Merki snið: Analog
- Vélbúnaðarviðmót: HP-HSC
Ábyrgð og stuðningur
TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic websíðuna eða hafðu samband við þjónustuver þeirra beint. Geymdu kaupkvittunina þína vegna ábyrgðarkröfu.
Opinber Websíða: www.tcelectronic.com