1. Inngangur
This manual provides essential information for the safe and efficient use of your Gewiss GW30411 Electronic 2-Channel Programmer. Please read these instructions carefully before installation and operation, and retain them for future reference. The GW30411 is designed for precise control of electrical circuits over time.
2. Öryggisupplýsingar
VIÐVÖRUN: Hætta á raflosti. Uppsetning og viðhald ætti aðeins að vera framkvæmt af hæfu starfsfólki.
- Aftengdu alltaf rafmagnið áður en tækið er sett upp eða viðhaldið.
- Gakktu úr skugga um að allar raflagnir séu í samræmi við gildandi rafmagnsreglugerðir og reglugerðir.
- Ekki láta tækið verða fyrir raka, miklum hita eða tærandi umhverfi.
- Do not attempt to open or modify the device; there are no user-serviceable parts inside.
- Geymið þar sem börn ná ekki til.
3. Vöru lokiðview
The Gewiss GW30411 is an electronic 2-channel programmer designed for managing electrical loads with timed switching. It features a clear digital display and intuitive controls for setting programs.
Mynd 1: Framan view of the Gewiss GW30411 Programmer. The display shows the current time (10:22), day (VE 13 GIU, likely Friday 13th June), and the 'ON' status, indicating an active program. Buttons for navigation and setting are visible on the right side.
Helstu eiginleikar:
- Digital display for time and program status.
- Two independent channels for flexible programming.
- Manual override function.
- Samþjappað hönnun fyrir auðvelda uppsetningu.
4. Uppsetning og uppsetning
Installation should be carried out by a qualified electrician. Ensure the main power supply is disconnected before proceeding.
4.1 Uppsetning
Mount the programmer in a suitable electrical enclosure or on a DIN rail, ensuring adequate ventilation and protection from environmental factors.
4.2 Raflögn
- Identify the power supply terminals (L and N) and connect them according to the wiring diagram provided with the product packaging.
- Connect the load wires for Channel 1 and Channel 2 to their respective output terminals.
- Double-check all connections for security and correctness before restoring power.
Refer to the detailed wiring diagram included in the product packaging for specific terminal assignments.
5. Notkunarleiðbeiningar
After successful installation and power-up, the device will display the current time or a default setting. Use the buttons on the right side of the unit to navigate menus and set parameters.
5.1 Upphafleg stilling tíma og dagsetningar
- Ýttu á MENU button (if available, or the primary setting button) to enter the settings mode.
- Farðu í TÍMI / DAGSETNING stilling með því að nota UPP/NIÐUR hnappa.
- Adjust the hour, minute, day, month, and year using the +/- or UPP/NIÐUR hnappa.
- Staðfestu hverja stillingu með ENTER or OK hnappinn.
5.2 Programming On/Off Cycles
The GW30411 allows you to set specific ON/OFF times for each of its two channels.
- Farðu í forritunarham með því að ýta á PROG hnappinn.
- Select the desired channel (Channel 1 or Channel 2).
- Stilltu viðkomandi ON time (hour and minute) for the first event.
- Stilltu viðkomandi SLÖKKT time (hour and minute) for the first event.
- Specify the days of the week for which the program should be active.
- Save the program and exit programming mode.
5.3 Handvirk hnekking
To temporarily override the programmed schedule, use the ON/OFF or HANDBÓK button. This typically cycles through ON, OFF, and AUTO modes. The display will indicate the current manual status.
6. Viðhald
The Gewiss GW30411 programmer requires minimal maintenance.
- Þrif: Þurrkið ytra byrðina með mjúkum, þurrum klút. Notið ekki slípiefni eða leysiefni.
- Skoðun: Periodically check for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.
7. Bilanagreining
If you encounter issues with your GW30411 programmer, refer to the following common problems and solutions:
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Skjárinn er auður. | Engin aflgjafi. | Athugaðu rofa og raflagnatengingar. |
| Programmed events are not activating. | Incorrect time/date setting; Program not saved; Manual override active. | Verify time/date; Re-enter and save program; Check manual override status. |
| Tækið svarar ekki. | Tímabundin hugbúnaðarvilla. | Disconnect power for 30 seconds, then restore. If problem persists, contact support. |
8. Tæknilýsing
- Vörumerki: Gewiss
- Gerð: GW30411
- Tegund: Electronic 2-Channel Programmer
- Framleiðandi: GEWISS
- ASIN: B00OM8R0GS
- Framboð á varahlutum: Upplýsingar ekki tiltækar
- Hugbúnaðaruppfærslur tryggðar til: Upplýsingar ekki tiltækar
- Date Listed on Amazon.com.be: 20. maí 2022
9. Ábyrgð og stuðningur
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Gewiss products are designed for reliability and performance.
If you require technical assistance or have questions not covered in this manual, please contact Gewiss customer support or your authorized distributor. Ensure you have your product model number (GW30411) and purchase details ready.
