1. Inngangur
This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine CDE-151 CD/MP3/WMA Receiver. Please read this manual thoroughly before using the unit to ensure proper operation and to prevent damage.
2. Öryggisupplýsingar
- Aflgjafi: This unit is designed for 12V DC negative ground electrical systems. Ensure proper voltage til að koma í veg fyrir skemmdir.
- Raflögn: Connect all wires correctly and securely. Incorrect wiring can cause fire or malfunction. Refer to the wiring diagram carefully.
- Uppsetning staðsetning: Setjið tækið upp á stað þar sem það hindrar ekki aðgang ökumanns að view or interfere with vehicle operation. Avoid locations exposed to direct sunlight, extreme heat, or moisture.
- Hljóðstyrkur: Do not operate the unit at excessively high volume levels for extended periods, as this may cause hearing damage or distract from driving.
- Í sundur: Do not attempt to disassemble or modify the unit. This may result in electric shock, fire, or other accidents. Refer all servicing to qualified personnel.
3. Innihald pakka
Gakktu úr skugga um að allir hlutir séu til staðar í pakkanum:
- Alpine CDE-151 Head Unit
- Raflið
- Festingarhylki og skrauthringur
- Installation Hardware (screws, removal keys)
- Notendahandbók (þetta skjal)
4. Uppsetning
4.1 Raflagnatengingar
Before making any connections, disconnect the vehicle's negative battery terminal to prevent short circuits. Refer to the wiring diagram below for proper connections. Each wire is color-coded for identification.
Figure 1: Rear Panel and Wiring Connections. This image displays the rear of the Alpine CDE-151 receiver, showing the main wiring harness connector, antenna input, and RCA preamp outputs. The color-coded wires of the harness are visible, indicating connections for power, ground, speakers, and accessory functions. Ensure all connections are secure and insulated.
- Gult (stöðugt afl): Tengist við stöðuga 12V aflgjafa ökutækisins.
- Rauður (aukaafl): Connect to the vehicle's ignition-switched 12V power supply.
- Svartur (jörð): Connect to a clean metal chassis point in the vehicle.
- Blue/White (Remote Turn-On): Tengist við fjarstýrða kveikjusnúruna á utanaðkomandi tæki amprafmagnari eða rafmagnsloftnet.
- Hátalarar vír: Connect to the corresponding vehicle speaker wires (e.g., White/White-Black for Front Left, Gray/Gray-Black for Front Right, Green/Green-Black for Rear Left, Purple/Purple-Black for Rear Right).
- RCA Preamp Úttak: Tengstu við ytri amplifiers for front, rear, or subwoofer channels.
4.2 Einingin sett upp
The CDE-151 is a single-DIN unit. Use the supplied mounting sleeve and hardware to secure the unit in the vehicle's dashboard opening. Ensure the unit is firmly seated and does not vibrate. After mounting, attach the trim ring for a finished appearance.
Mynd 2: Hlið View of Receiver Chassis. Þessi mynd sýnir hliðarprófiðfile of the Alpine CDE-151 receiver, highlighting the metal chassis with ventilation holes and mounting screw points. This view is useful for understanding the unit's dimensions and how it fits into a standard single-DIN opening.
5. Upphafsuppsetning
After installation, reconnect the vehicle's negative battery terminal. The unit will power on. Follow these steps for initial setup:
- Kveikt á: Ýttu á SOURCE/⑂ hnappinn til að kveikja á einingunni.
- Stilling klukku: Access the setup menu to set the correct time. Refer to the 'System Settings' section for detailed instructions.
- Initial Audio Settings: Adjust basic audio parameters like Bass, Treble, Balance, and Fader to your preference.
6. Notkunarleiðbeiningar
This section details the functions of the front panel controls and various playback modes.
Mynd 3: Stjórntæki á framhliðinni. This image displays the front face of the Alpine CDE-151 receiver, highlighting the main rotary encoder, source button, bass button, band button, and preset buttons. The display shows 'BASS ENGINE', indicating an active audio feature. This view is essential for understanding how to operate the unit.
6.1 Grunnstýringar
- Rotary Encoder (Volume Knob): Turn to adjust volume. Press to access audio settings or confirm selections.
- SOURCE/⑂ Button: Press to switch between input sources (CD, USB, AUX, Tuner). Press and hold to turn the unit off.
- BASS hnappur: Directly access Bass Engine settings for quick bass adjustments.
- BAND Hnappur: Í útvarpsstillingu, ýttu á til að skipta á milli FM1, FM2, FM3 og AM tíðna.
- Forstilltir hnappar (1-6): Store and recall radio stations. In CD/USB mode, these may function as direct track selection or folder navigation.
- Forward/Backward Buttons (◀◀/▶▶): Skip tracks/files or seek radio stations.
6.2 Geislaspilun
- Insert a CD into the disc slot with the label side up. The unit will automatically load and begin playback.
- Use the ◀◀/▶▶ buttons to skip tracks.
- Press the Rotary Encoder to pause/play.
6.3 USB spilun
- Connect a USB storage device to the front USB input.
- Ýttu á SOURCE hnappinn til að velja USB.
- Use the ◀◀/▶▶ buttons to navigate tracks. Use the preset buttons for folder navigation if applicable.
- The unit supports MP3 and WMA audio files.
6.4 Aukainntak
- Connect an external audio device (e.g., smartphone, portable music player) to the front 3.5mm auxiliary input jack.
- Press the SOURCE button to select AUX.
- Stjórna spilun frá tengda tækinu.
6.5 Útvarpsstillir
- Press the SOURCE button to select Tuner.
- Press the BAND button to select FM1, FM2, FM3, or AM.
- Use the ◀◀/▶▶ buttons to seek for stations. Press and hold for manual tuning.
- To store a preset: Tune to the desired station, then press and hold one of the preset buttons (1-6) until you hear a beep.
- To recall a preset: Briefly press the desired preset button (1-6).
6.6 Hljóðstillingar
The CDE-151 features a 3-Band Equalizer and Bass Engine for sound customization.
- Accessing Audio Settings: Press the Rotary Encoder to enter the audio menu. Turn the encoder to navigate through options like Bass, Mid, Treble, Balance, Fader, and Subwoofer level (if connected). Press the encoder to select an option and turn to adjust.
- Bass Engine: Press the BASS button for quick access to bass enhancement features.
7. Viðhald
- Þrif á einingunni: Wipe the front panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Umhirða diska: Haltu geisladiskum á brúnunum. Haltu þeim hreinum og rispuðum.
- USB tengi: Haldið USB-tenginu lausu við ryk og óhreinindi.
8. Bilanagreining
| Vandamál | Lausn |
|---|---|
| Enginn kraftur | Check power connections (Yellow, Red, Black wires). Ensure vehicle battery is charged. Check vehicle fuses. |
| Ekkert hljóð | Check speaker wire connections. Ensure volume is not muted or too low. Verify amplifier remote turn-on (Blue/White wire) if using external amps. |
| Geisladiskur/USB spilar ekki | Ensure disc is inserted correctly and is not scratched/dirty. For USB, ensure device is formatted correctly (FAT16/32) and contains supported file gerðir (MP3/WMA). |
| Útvarpsmóttaka er léleg | Check antenna connection. Ensure antenna is fully extended (if applicable). Try tuning to a stronger station. |
9. Tæknilýsing
- Vörumál: 9.06 x 3.94 x 10.63 tommur
- Þyngd hlutar: 3.1 pund
- Úttaksstyrkur: 50 Watts x 4 Channels (Max), 18 Watts x 4 Channels (RMS)
- Fjöldi rása: 4
- Tengingartækni: Aukabúnaður, USB
- Sérstakur eiginleiki: Equalizer (3-Band EQ, Bass Engine)
- Hljóðútgangsstilling: Stereo
- Samhæf tæki: Snjallsími, hátalari
- Framleiðandi: Alpine
10. Ábyrgð og stuðningur
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Alpine webGeymið kaupkvittunina sem sönnun fyrir kaup vegna ábyrgðarkröfu.
