Brandmotion FLTW-7690 Universal 4.3-inch Display Rear View Notkunarhandbók fyrir spegil

1. Inngangur

The Brandmotion FLTW-7690 Universal 4.3-inch Display Rear View Mirror is designed to enhance driving safety by providing a clear view of the area behind your vehicle when connected to an aftermarket backup camera. This mirror replaces your traditional rear view mirror and features an embedded 4.3-inch LCD color screen that automatically activates when the vehicle is in reverse. When not in reverse, the screen disappears, allowing the mirror to function as a standard rear view mirror. This manual provides essential information for proper installation, operation, and maintenance of your new display mirror.

2. Öryggisupplýsingar

• Mælt er með faglegri uppsetningu: For optimal performance and safety, professional installation is strongly recommended.
• Aftermarket Camera Required: This product is not a complete solution and requires an aftermarket backup camera (not included) for its display functionality.
• Samhæfni ökutækja: Designed for most vehicles utilizing a D-Tab Wedge mount. Some vehicles may require an adapter (e.g., Brandmotion 5000-TFAB). Verify fitment before final installation.
• Non-Dimming Mirror: This is a non-dimming display mirror.
• Not OnStar Compatible: This mirror is not compatible with OnStar systems.
• Raflögn: Ensure all wiring is correctly connected and secured to prevent interference or damage.
• Aflgjafi: Operate within the specified 9-24V operating voltage svið.

3. Innihald pakka

Please verify that all items are present before beginning installation:

• One (1) Brandmotion 4.3-inch Display Mirror (FLTW-7690)
• Wiring Harness with RCA Inputs and Trigger Wires
• Mounting Hardware (if applicable, typically for D-Tab Wedge mount)

Image: The Brandmotion FLTW-7690 display mirror shown with its included wiring harness and mounting accessories.

4. Vöru lokiðview

The Brandmotion FLTW-7690 mirror integrates a 4.3-inch LCD screen into a standard rear view mirror housing. Key features include:

• 4.3-inch Embedded LCD Screen: Provides a clear, full-color display (800x400 resolution, 420p) for backup camera feed.
• Sjálfvirk virkjun: Screen automatically turns on when the vehicle is shifted into reverse.
• Disappearing Display: Screen becomes invisible when not in use, functioning as a standard mirror.
• Two RCA Inputs: Allows connection of up to two video sources (e.g., front and rear cameras).
• Kveikja/slökkva hnappur: For manual control of the display.

Mynd: Framan view of the Brandmotion FLTW-7690 mirror showing the 4.3-inch embedded display with a backup camera feed. Note the power button below the mirror surface.

Mynd: Aftan view of the Brandmotion FLTW-7690 mirror, illustrating the mounting arm and the wiring exiting the unit.

5. Uppsetning

Áætlaður uppsetningartími: DIY: 60-90 minutes; Professional: 30-60 minutes.

5.1 Athuganir fyrir uppsetningu

• Ensure your vehicle uses a standard D-Tab Wedge mount. An adapter (Brandmotion 5000-TFAB) may be required for some vehicles.
• Confirm you have an aftermarket backup camera ready for connection.
• Aftengdu rafgeymi ökutækisins áður en hafist er handa við rafmagnsvinnu.

5.2 Uppsetning spegilsins

1. Carefully remove your vehicle's existing rear view mirror from its D-Tab Wedge mount.
2. Slide the Brandmotion FLTW-7690 mirror onto the existing D-Tab Wedge mount until it is securely seated.
3. Tighten any set screws or locking mechanisms on the mirror mount to ensure stability.

5.3 Raflagnatengingar

1. Rafmagnstenging: Connect the mirror's power wire (typically red) to a switched 12V power source in your vehicle. Connect the ground wire (typically black) to a suitable chassis ground point. Ensure the operating voltage er á bilinu 9-24V.
2. Backup Camera Video Input: Connect the RCA video output cable from your aftermarket backup camera to one of the RCA input jacks on the mirror's wiring harness. The mirror has two RCA inputs.
3. Vír fyrir afturvirka kveikju: Connect the mirror's reverse trigger wire (often purple or green) to your vehicle's reverse light circuit. This wire signals the mirror to activate the display when the vehicle is in reverse.
4. Leiðarlögn: Carefully route all wiring behind trim panels and headliner to conceal it and prevent interference with vehicle operation. Secure wiring with zip ties or electrical tape as needed.

Image: A diagram illustrating the typical wiring connections for the Brandmotion display mirror, including power, ground, video input, and reverse trigger.

5.4 Athugun eftir uppsetningu

1. Tengdu rafhlöðu ökutækisins aftur.
2. Start the vehicle and shift into reverse. The 4.3-inch display should activate and show the backup camera feed.
3. Shift out of reverse. The display should turn off and disappear.
4. Test the On/Off button for manual display control.

6. Notkunarleiðbeiningar

• Sjálfvirk skjávirkjun: When the vehicle is shifted into reverse, the 4.3-inch LCD screen embedded in the mirror will automatically activate, displaying the video feed from the connected backup camera.
• Automatic Display Deactivation: When the vehicle is shifted out of reverse, the LCD screen will automatically turn off and become invisible, allowing the mirror to function as a standard rear view spegil.
• Manual Display Control: Use the On/Off button located on the bottom of the mirror housing to manually turn the display on or off, regardless of the vehicle's gear selection.
• Parking Gridlines: This mirror does not provide parking gridline overlays. If gridlines are desired, they must be supplied by your aftermarket backup camera.

Image: The Brandmotion FLTW-7690 mirror as seen from the driver's perspective, with the backup camera display active and showing parking assist lines (if provided by the camera).

7. Viðhald

• Þrif á yfirborði spegilsins: Use a soft, lint-free cloth and a non-abrasive glass cleaner to clean the mirror surface. Do not spray cleaner directly onto the mirror; apply it to the cloth first.
• Þrif á húsnæði: Wipe the mirror housing with a damp cloth. Avoid harsh chemicals or solvents.
• Skoðun raflagna: Athugið reglulega allar tengingar raflagna til að tryggja að þær séu öruggar og lausar við skemmdir.
• Viðhald myndavélar: Refer to your aftermarket backup camera's manual for its specific cleaning and maintenance instructions.

8. Bilanagreining

9. Tæknilýsing

• Gerð: FLTW-7690
• Skjástærð: 4.3 tommur
• Skjárupplausn: 800 x 400 (420p)
• Hlutfall: 4:3
• Myndbandssnið: NTSC
• Vídeóinntak: 2 x RCA (with trigger wires)
• Operation Voltage: 9-24V
• Tegund spegils: Non-dimming display mirror
• Gerð festingar: Standard D-Tab Wedge Mount
• Stærðir (vara): 12 x 6 x 4 tommur (áætlað)
• Þyngd: 1.8 pund (um það bil)
• UPC: 858216004790

10. Ábyrgð og stuðningur

For warranty information, please refer to the documentation included with your purchase or visit the official Brandmotion website. For technical support or assistance with installation, please contact Brandmotion customer service directly.

Brandmotion Contact Information:

• Websíða: www.brandmotion.com
• (Specific contact details like phone number or email may vary and are best found on the official websíðu.)