iHome iBT230SSC Bluetooth Bedside Dual Alarm Clock Radio User Manual

Inngangur

The iHome iBT230SSC is a versatile Bluetooth bedside dual alarm clock radio designed to enhance your daily routine. It features wireless audio streaming, a speakerphone, USB charging, and an FM radio. This manual provides essential information for proper setup, operation, and maintenance of your device.

Innihald pakka

• iHome iBT230SSC Bluetooth Bedside Dual Alarm Clock Radio
• Rafmagns millistykki
• Notendahandbók (þetta skjal)

Uppsetning

1. Rafmagnstenging

Connect the included AC power adapter to the DC jack located on the back of the iBT230SSC unit. Plug the other end of the adapter into a standard wall outlet. The unit will power on and the display will illuminate.

2. Uppsetning rafhlöðuafritunar

The iBT230SSC requires backup batteries (not included) to maintain time and alarm settings during a power outage. Locate the battery compartment on the bottom of the unit. Insert the required batteries, observing the polarity markings (+/-). Close the compartment cover securely.

3. Að stilla tímann

Við fyrstu ræsingu eða eftir að rafmagn hefur verið rofiðtage without battery backup, the time display may flash. Refer to the 'Operating Instructions' section for detailed steps on how to set the current time.

4. FM loftnet

Til að fá bestu FM útvarpsmóttöku skaltu draga innbyggða FM vírloftnetið, sem er staðsett aftan á tækinu, alveg út. Stilltu stöðu þess til að fá besta móttökuna.

Mynd: Framan view of the iHome iBT230SSC Bluetooth Bedside Dual Alarm Clock Radio, showing the digital display and control buttons.

Notkunarleiðbeiningar

1. Kveikt/slökkt

Ýttu á Kraftur hnappinn til að kveikja eða slökkva á tækinu.

2. Skjádeyfir

Ýttu á Dimmar button (often integrated with Snooze) repeatedly to cycle through different brightness levels for the display (Lo/Med/Hi) or to turn the display off completely.

3. Stilla viðvörun

The iBT230SSC features dual alarms (Alarm 1 and Alarm 2). Each alarm can be set independently.

1. Ýttu á og haltu inni viðkomandi Viðvörun 1 or Viðvörun 2 button until the alarm time flashes on the display.
2. Notaðu Time Set +/- buttons to adjust the alarm hour. Press the Viðvörun button again to confirm the hour and move to minutes.
3. Notaðu Time Set +/- buttons to adjust the alarm minutes. Press the Viðvörun hnappinn aftur til að staðfesta.
4. Select the wake source (FM Radio, Bluetooth, or Buzzer) using the Time Set +/- hnappa. Ýttu á Viðvörun hnappinn til að staðfesta.
5. Stilltu hljóðstyrk vekjaraklukkunnar með því að nota Bindi +/- hnappa. Ýttu á Viðvörun button to confirm and exit alarm setting mode.

4. Bluetooth Pairing and Audio Streaming

Til að streyma hljóði þráðlaust úr Bluetooth-tæki:

1. Ýttu á Bluetooth button on the iBT230SSC. The Bluetooth indicator will flash, indicating pairing mode.
2. Enable Bluetooth on your mobile device (e.g., smartphone, tablet) and select "iHome iBT230" from the list of available devices.
3. Once paired, the Bluetooth indicator will glow solid, and you can begin streaming audio.
4. Use the controls on your device or the iBT230SSC (Play/Pause, Track +/-) to manage playback.

5. FM útvarpsrekstur

Til að hlusta á FM útvarp:

1. Ýttu á FM útvarp hnappinn til að skipta yfir í FM-stillingu.
2. Ýttu á Stilla +/- hnappana til að stilla handvirkt á stöð.
3. Ýttu á og haltu inni Stilla +/- hnappana til að leita sjálfkrafa að næstu tiltæku stöð.
4. Til að vista forstillingu: Stilltu á stöðina sem þú vilt, haltu síðan inni Forstilling (1-5) button until the preset number flashes on the display. Press the Forstillt hnappinn aftur til að staðfesta.
5. To recall a preset: Press the desired Forstilling (1-5) hnappinn.

6. Hátalaravirkni

When a call comes in while your device is connected via Bluetooth:

• Ýttu á Svara/slíta símtali hnappinn til að svara innhringingu.
• Talaðu í innbyggða hljóðnemann á tækinu.
• Ýttu á Svara/slíta símtali hnappinn aftur til að ljúka símtalinu.

7. USB hleðsluhöfn

Connect a USB charging cable (not included) from your mobile device to the USB port on the back of the iBT230SSC to charge your device. This port provides 1-amp hleðsluútgangur.

8. Aux-in Audio

Connect an audio device (e.g., MP3 player) to the Aux-in jack on the back of the unit using a 3.5mm audio cable (not included). Press the Aux button to switch to Aux-in mode.

9. Svefntímamælir

Ýttu á Sofðu button repeatedly to cycle through sleep timer durations (e.g., 120, 90, 60, 30, 15 minutes, or Off). The unit will automatically turn off after the selected time.

Viðhald

Þrif á einingunni

Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive materials. Ensure the unit is unplugged before cleaning.

Skipt um rafhlöðu

Replace the backup batteries annually or when the low battery indicator appears. Refer to the 'Battery Backup Installation' section for instructions.

Úrræðaleit

• Enginn kraftur: Ensure the AC adapter is securely connected to both the unit and a working wall outlet. Check the power outlet with another device.
• Vandamál með Bluetooth-tengingu: Ensure Bluetooth is enabled on your device and the iBT230SSC is in pairing mode. Move your device closer to the unit. Try unpairing and re-pairing the device. If multiple Bluetooth devices are nearby, temporarily disable Bluetooth on other devices.
• Alarm Not Sounding or Too Quiet: Verify that the alarm is set correctly and the alarm volume is adjusted to an audible level. Ensure the correct wake source is selected.
• Léleg FM útvarpsmóttaka: Dragðu FM-vírsloftnetið alveg út og færðu það til. Reyndu að færa tækið á annan stað.
• Display Not Working or Too Dim: Adjust the display dimmer setting using the Dimmar hnappinn.

Tæknilýsing

Ábyrgð og stuðningur

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official iHome website. Do not attempt to service this product yourself.