Notendahandbók fyrir Finder seríu 27 gerð 270182300000 rafsegulfræðilegt púlsrofa

1. Inngangur

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Finder Series 27 Type 270182300000 Electromechanical Pulse Relay. Please read this manual thoroughly before using the product and retain it for future reference.

The Finder Series 27 pulse relay is a 10 A, unipolar switch with 1 normally open (NO) contact, designed for AC 50/60 Hz systems at 230 V. It features a standard design with socket clamps for connection and is suitable for panel mounting.

2. Öryggisupplýsingar

VIÐVÖRUN: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• Aftengdu alltaf rafmagnið áður en rofinn er settur upp, þjónustaður eða fjarlægður.
• Gakktu úr skugga um rétta jarðtengingu til að koma í veg fyrir raflost.
• Staðfestu að framboð voltage and current ratings match the relay's specifications.
• Do not operate the relay in environments exceeding its specified temperature or humidity limits.
• Avoid exposing the relay to moisture or corrosive substances.

3. Vöru lokiðview

The Finder Series 27 Electromechanical Pulse Relay is designed for applications requiring sequential switching, such as lighting control. Key features include:

• Panelfesting: Designed for secure installation within electrical panels.
• AC Coils: Operates with alternating current.
• 1 NO Contact: Features one normally open contact for switching circuits.
• 3 Sequences Available: Supports various operational sequences.
• Hár orkugeta: Metið fyrir 10 Amps and 2400 Watts at 230 Volts.

Mynd 3.1: Framan view of the Finder Series 27 Electromechanical Pulse Relay, showing its transparent casing og tengiklemma.

4. Uppsetning og uppsetning

This pulse relay is designed for panel mounting. Follow these steps for proper installation:

1. Rafmagnstenging: Ensure all power to the installation area is disconnected at the main circuit breaker before beginning any work.
2. Uppsetning: Securely mount the relay within an electrical panel using appropriate fasteners. The relay dimensions are approximately 1.26 x 2.17 x 2.76 inches.
3. Raflagnatengingar:
   • Identify the three terminals on the relay.
   • Connect the control circuit wires to the coil terminals (A1, A2) as indicated on the relay. The coil voltage is 230 Volts AC.
   • Connect the load circuit wires to the contact terminals (1 NO) using the clamp-type connectors. The relay is rated for 10 Amps.
   • Gakktu úr skugga um að allar tengingar séu þéttar og öruggar til að koma í veg fyrir lausar snertingar og ofhitnun.
4. Staðfesting: Double-check all wiring against the electrical diagram for your specific application.
5. Rafmagnsendurheimt: Þegar uppsetningu er lokið og hún er staðfest skal setja rafmagn aftur á rafrásina.

Mynd 4.1: Ítarlegt view of the Finder Series 27 Relay's screw terminals, illustrating connection points for wiring.

5. Notkunarleiðbeiningar

The Finder Series 27 pulse relay operates automatically based on the control signals it receives. It is commonly used in applications where a momentary input signal triggers a change in the output state, which then remains until the next momentary input.

• When a pulse is applied to the coil terminals (A1, A2), the internal mechanism latches, changing the state of the 1 NO contact.
• The contact remains in this new state even after the control pulse is removed.
• A subsequent pulse will revert the contact to its original state.
• The relay supports three distinct operational sequences, which are determined by the specific model variant and internal configuration. Refer to your system's wiring diagram for the exact sequence implemented.

Mynd 5.1: Example of the Finder Series 27 Relay integrated into a kitchen lighting system, demonstrating its application in controlling light fixtures.

Mynd 5.2: The Finder Series 27 Relay shown in a living room setting, illustrating its use for managing multiple light sources.

6. Viðhald

The Finder Series 27 pulse relay is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended:

• Sjónræn skoðun: Periodically inspect the relay for any signs of physical damage, discoloration, or loose connections.
• Þrif: Ef nauðsyn krefur, þrífið varlega ytra byrði rofans með þurrum, mjúkum klút. Notið ekki leysiefni eða slípiefni.
• Tengingarathugun: Gakktu úr skugga um að allar raflagnatengingar séu þéttar og öruggar.
• Umhverfisskilyrði: Staðfestið að rekstrarumhverfið sé innan tilgreindra hitastigs- og rakastigsmarka.

Athugið: The relay is a sealed unit and is not user-serviceable internally. Do not attempt to open the casing.

7. Bilanagreining

If the Finder Series 27 pulse relay is not functioning as expected, consider the following troubleshooting steps:

• No Response to Control Signal:
  • Check if power is supplied to the control circuit and the relay coil (A1, A2).
  • Verify that the control signal voltage matches the relay's coil voltage (230V AC).
  • Inspect control circuit wiring for breaks or loose connections.
• Álag skiptir ekki:
  • Ensure the relay is receiving control pulses and its internal mechanism is audibly clicking or visibly changing state (if applicable).
  • Check the load circuit wiring for continuity and secure connections.
  • Verify that the load current does not exceed the relay's 10 Amp einkunn.
  • Confirm that the load itself is functional.
• Relay Overheating:
  • Ensure the load current does not exceed the relay's maximum rating.
  • Check for proper ventilation around the relay within the panel.
  • Staðfestið að umhverfishitastigið sé innan tilgreinds rekstrarsviðs.

If issues persist after performing these checks, contact a qualified electrician or Finder technical support.

8. Tæknilýsing

9. Ábyrgð og stuðningur

For information regarding warranty coverage, technical support, or service, please contact Finder directly through their official webvefsvæði eða viðurkenndir dreifingaraðilar. Geymið kaupkvittunina sem sönnun fyrir kaupunum.

Framleiðandi: FINNANDI

Hlutanúmer: 27.01.8.230.0000