EPEVER MPPT Solar Charge Controller Tracer A 1210AN User Manual

1. Inngangur

The EPEVER Tracer A 1210AN is an advanced Maximum Power Point Tracking (MPPT) solar charge controller designed for off-grid solar systems. It efficiently manages power flow from solar panels to batteries, ensuring optimal charging and extending battery life. This manual provides essential information for the safe and effective installation, operation, and maintenance of your Tracer A 1210AN controller.

Image 1: EPEVER MPPT Solar Charge Controller Tracer A 1210AN. This image shows the front view of the solar charge controller, highlighting its display and control buttons, along with key features and typical applications such as RVs, homes, solar power systems, campog notkun sjávar.

2. Öryggisupplýsingar

Please read all instructions and warnings carefully before installation and operation.

• Gakktu úr skugga um að allar raflagnir séu rétt skautaðar og örugglega tengdar til að koma í veg fyrir skemmdir á stjórntækinu eða öðrum íhlutum.
• Tengdu alltaf rafhlöðuna fyrst, síðan sólarsella og að lokum álagið. Aftengdu í öfugri röð.
• Ekki taka stjórntækið í sundur eða reyna að gera við það sjálfur. Hafðu samband við hæft starfsfólk til að fá þjónustu.
• Setjið stjórntækið upp á vel loftræstum stað, fjarri eldfimum efnum og beinu sólarljósi.
• Use appropriate circuit breakers or fuses for all connections to protect against overcurrent.
• The controller is designed for common positive grounding.

3. Vörueiginleikar

The Tracer A 1210AN MPPT Solar Charge Controller incorporates advanced technology for efficient and reliable solar power management:

• Ítarleg MPPT tækni: Ensures high tracking efficiency, typically not less than 99.5%, and a peak conversion efficiency of 98%.
• Hraður mælingarhraði: Ultra-fast tracking speed and accurate recognition of multiple power points.
• Marg-stage Hleðsla: Er með 3-stage charging algorithm (Bulk, Boost, Float, Equalize) with PWM output for optimal battery health.
• Samhæfni rafhlöðu: Supports various battery types, including Sealed, Gel, Flooded, and Lithium batteries (LiFePO4, Li(NiCoMn)O2).
• Innsæi skjár: A multifunction LCD displays system information clearly.
• User Programmable: Parameters for battery types and load control are user-programmable via PC software or remote meter.
• Samskiptahöfn: Equipped with an RS485 port using industrial standard MODBUS protocol for external communication and monitoring.
• Comprehensive Electronic Protections: Includes protection against PV reverse polarity, PV short circuit, PV overcurrent, battery overcharge, battery over-discharge, battery reverse polarity, load short circuit, load overload, and overheating.

Image 2: Key features of the EPEVER MPPT Solar Charge Controller. This image illustrates the core functionalities such as 100% Advanced MPPT Technology, Ultra-fast tracking speed, User programmable for battery types, Charging Bulk/Constant/Boost/Equalize, Max input 100V, and Full Battery Protection.

4. Uppsetning og uppsetning

4.1 Tengifyrirmæli

Follow the correct connection sequence to ensure safe and proper operation.

1. Tengdu rafhlöðuna fyrst: Connect the battery to the charge controller. Ensure correct polarity.
2. Connect DC Load: Tengdu jafnstraumsálagið við hleðslustýringuna.
3. Connect PV Panel: Tengdu sólarplötuna við hleðslustýringuna.
4. Connect Inverter (Optional): If using an inverter, connect it to the battery bank.

Aftengingarfyrirmæli: To disconnect the system, follow the reverse order: Inverter (if applicable), PV Panel, DC Load, then Battery.

Image 3: Connection diagram for the EPEVER MPPT Solar Charge Controller. This diagram illustrates the correct wiring sequence: 1. Battery, 2. DC Load, 3. PV Panel, and 4. Inverter (optional), along with optional accessories like a temperature sensor, breaker, and communication modules (eBox-WIFI-01, MT50).

4.2 Studdar rafhlöðutegundir

The controller supports various battery types. Ensure you select the correct type for optimal charging.

• Flóð
• Gel
• Sealed/AGM
• LiFePO4 (4S/8S)
• Li(NiCoMn)O2 (3S/6S/7S)
• Notendaskilgreint

Image 4: Display interface and supported battery types. This image shows the various screens of the controller's LCD display, including real-time data for PV current, PV voltage, rafhlaða binditage, load current, and temperature. It also illustrates the different battery types supported: Flooded, Gel, Sealed/AGM, LiFePO4, Li(NiCoMn)O2, and User-defined.

4.3 System Configuration Calculation

Properly sizing your solar system components is crucial for efficient operation. The following formulas and example can help determine appropriate load power consumption, battery capacity, and solar panel power.

Image 5: System Configuration Calculation. This image provides formulas and an example for calculating load power consumption (Qc), battery capacity (Cb), and solar panel power (P) for a home solar system, considering factors like continuous running days, system voltage level, discharge depth, peak sunshine hours, and derating coefficients.

5. Notkunarleiðbeiningar

5.1 LCD skjáviðmót

The controller features an intuitive LCD display to monitor system status and parameters. Use the "SELECT" and "ENTER" buttons to navigate through the interface.

Mynd 6: Ítarlegt view of the LCD display interface. This image shows various screens displaying real-time data such as PV current, PV voltage, generated energy (mWh), battery voltage, load current, and battery temperature. It also illustrates how to browse through these screens.

5.2 Setting Battery Type via LCD

It is critical to set the correct battery type on the controller to ensure proper charging and prevent battery damage.

1. Navigate to the battery type setting screen using the "SELECT" button.
2. Press "ENTER" to enter edit mode.
3. Use "SELECT" to cycle through the available battery types (Sealed, Gel, Flooded, LiFePO4, Li(NiCoMn)O2, User).
4. Ýttu á „ENTER“ til að staðfesta valið.

Image 7: Instructions for setting the battery type via the LCD. This section of the image visually guides the user through selecting different battery types like Sealed (default), Gel, Flooded, LiFePO4 (F04, F08), Li(NiCoMn)O2 (75, 65, 35), and User-defined settings.

5.3 Hleðsla Stages

Stýringin notar 3-stage charging algorithm to optimize battery charging:

• Magngjald: Gefur hámarksstraum til að hlaða rafhlöðuna hratt.
• Uppörvunargjald: Charges the battery at a higher voltage to ensure it reaches full capacity.
• Flotagjald: Heldur rafhlöðunni á öruggu spennustigitage level to prevent self-discharge and overcharging.
• Jöfnunarhleðsla (fyrir ákveðnar gerðir rafhlöðu): Ofhleður rafhlöðuna reglulega til að jafna hleðslugetu rafhlöðunnar.tagog koma í veg fyrir súlfötun.

6. Viðhald

Reglulegt viðhald tryggir langlífi og bestu mögulegu afköst sólarhleðslustýringarinnar.

• Skoðaðu tengingar: Athugið reglulega hvort allar raflagnir séu þéttar eða tærðar. Lausar tengingar geta valdið ofhitnun og skemmdum.
• Hreinsa stjórnandi: Keep the controller clean and free from dust and debris. Ensure ventilation openings are not blocked.
• Athugaðu rafhlöðu: Fylgstu með rafhlöðu voltage and electrolyte levels (for flooded batteries) regularly. Ensure the battery type setting on the controller matches your battery.
• Umhverfisskilyrði: Ensure the controller is operating within its specified temperature range and protected from moisture.

7. Bilanagreining

The Tracer A 1210AN includes various electronic protections to prevent damage. If you encounter issues, refer to the following:

7.1 Electronic Protections

• PV Reverse Polarity Protection: Prevents damage if solar panel polarity is reversed.
• PV Short Circuit Protection: Protects against short circuits from the solar panel.
• PV Overcurrent Alarm Protection: Alerts if solar panel current exceeds safe limits.
• Battery Overcharge Protection: Kemur í veg fyrir að rafhlöður skemmist vegna ofhleðslu.
• Battery Over-discharge Protection: Prevents battery damage from deep discharge.
• Rafhlaða öfug skautavörn: Protects against reversed battery connections.
• Load Short Circuit Protection: Protects the load output from short circuits.
• Load Overload Protection: Protects the load output from excessive current draw.
• Ofhitunarvörn: Shuts down or reduces power if the controller temperature becomes too high.

7.2 Algeng vandamál og lausnir

8. Tæknilýsing

Detailed technical specifications for the EPEVER Tracer A 1210AN MPPT Solar Charge Controller.

Image 8: Specifications table for EPEVER Tracer A series controllers. This table provides comparative data for models 1210AN, 2210AN, 3210AN, and 4210AN, including product model, dimensions, max power current, power terminals, MPP voltage range, battery input voltage range, max PV input power, max PV open circuit voltage, grounding type, and weight.

9. Ábyrgð og stuðningur

For warranty information and technical support, please refer to the official EPEVER websíðuna eða hafið samband við viðurkenndan söluaðila. Geymið kaupkvittunina sem sönnun fyrir kaupunum.

Framleiðandi: Epever
Vörumerki: EVER