Vara lokiðview
The Newhouse Hardware WCM120 Wireless Door Chime Kit provides a convenient and reliable solution for your home's entryway. This kit includes a wireless door chime receiver and a push-button transmitter, designed for easy installation and operation.
Helstu eiginleikar eru:
- Rekstrardrægi allt að 75 fet.
- 32 selectable codes to prevent interference from other wireless devices.
- Two selectable chime sounds: Westminster Chime and Ding-Dong.
- Includes a wireless push-button transmitter and two 3-Volt batteries for the transmitter.
Image: The Newhouse Hardware WCM120 Wireless Door Chime Kit, showing the white rectangular chime unit and the smaller white push-button transmitter.
Uppsetning og uppsetning
1. Upppakkning og uppsetning rafhlöðu
Carefully remove all components from the packaging. The kit includes the wireless door chime receiver, the wireless push-button transmitter, and two 3-Volt batteries for the transmitter. Please note that three AAA batteries for the receiver are ekki fylgir og þarf að kaupa sérstaklega.
- Receiver Battery Installation: Locate the battery compartment on the back of the door chime receiver. Insert three AAA batteries, ensuring correct polarity (+/-).
- Uppsetning rafhlöðu sendis: The two 3-Volt batteries for the transmitter are included. Open the transmitter casing and insert the batteries, observing polarity.
Image: All components of the Newhouse Hardware WCM120 Wireless Door Chime Kit laid out, including the chime unit, push-button, mounting screws, wall anchors, and adhesive strip.
2. Uppsetning móttakara
The door chime receiver can be placed on a flat surface or mounted to a wall. For optimal performance, choose a central location within 75 feet of where the push-button transmitter will be installed.
- Veggfesting: Use the provided screws and wall anchors to secure the receiver to a wall. Ensure it is mounted securely.
3. Mounting the Push-Button Transmitter
The push-button transmitter is designed for outdoor use and can be mounted near your door. It can be attached using either the included adhesive strip or screws.
- Límfesting: Clean the surface where you intend to mount the transmitter. Peel the backing from the adhesive strip and firmly press the transmitter onto the desired location.
- Skrúfafesting: For a more permanent installation, use the provided screws to attach the transmitter to the door frame or wall.
Mynd: Framan view of the Newhouse Hardware WCM120 Wireless Door Chime Kit, showing the chime unit and the push-button side-by-side.
Notkunarleiðbeiningar
1. Selecting a Chime Sound
The WCM120 offers two distinct chime sounds: Westminster Chime and Ding-Dong. To switch between these sounds, locate the sound selection button or switch on the receiver unit. Press or toggle it to cycle through the available options until you hear your preferred chime.
2. Changing Codes to Prevent Interference
Your wireless door chime kit features 32 selectable codes to help prevent interference from other wireless devices in your vicinity. If you experience false rings or inconsistent operation, you may need to change the operating code.
- Locate the code selection jumpers or switches inside both the receiver and the transmitter units.
- Using a small tool (e.g., a screwdriver), adjust the jumpers/switches in both units to a new, matching code. Both the receiver and transmitter must be set to the same code for the system to function correctly.
- Test the system after changing the code to ensure proper communication.
3. Dagleg notkun
Once installed and configured, simply press the push-button transmitter to activate the chime. The receiver will play the selected chime sound.
Viðhald
Skipt um rafhlöðu
Regular battery replacement is essential for consistent performance. The operating range and chime volume may decrease as batteries lose power.
- Móttökutæki: Replace the three AAA batteries in the receiver when the chime sound becomes faint or stops working.
- Sendandi: Replace the two 3-Volt batteries in the push-button transmitter if the chime does not activate when the button is pressed, or if the range is significantly reduced.
Fargið alltaf gömlum rafhlöðum á ábyrgan hátt í samræmi við gildandi reglur.
Úrræðaleit
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Chime does not ring when button is pressed. |
|
|
| Chime rings unexpectedly (false rings). |
|
|
| Chime sound is faint or distorted. |
|
|
Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Gerðarnúmer | WCM120 |
| Rekstrarsvið | Allt að 75 fet |
| Selectable Codes | 32 |
| Hljómar | Westminster Chime, Ding-Dong |
| Stærðir móttakara | 3"W x 4 3/8"H (approx. 7.6cm W x 11.1cm H) |
| Push Button Dimensions | 1"W x 3 5/8"H (approx. 2.5cm W x 9.2cm H) |
| Receiver Battery Requirement | 3 x AAA rafhlöður (fylgir ekki) |
| Transmitter Battery Requirement | 2 x 3-Volt batteries (included) |
| Þyngd hlutar | 4.8 aura (u.þ.b. 136 grömm) |
| Vörumál | 4.5 x 2.75 x 1.5 tommur (u.þ.b. 11.4 x 7 x 3.8 cm) |
| Litur | Hvítur |
Upplýsingar um ábyrgð
This Newhouse Hardware WCM120 Wireless Door Chime Kit comes with a 2 ára ábyrgð frá kaupdegi. Þessi ábyrgð nær til galla í efni og framleiðslu við eðlilega notkun. Vinsamlegast geymið kaupkvittunina vegna ábyrgðarkröfu.
For detailed warranty terms and conditions, or to initiate a warranty claim, please refer to the official Newhouse Hardware websíðuna eða hafðu samband við þjónustuver þeirra.
Þjónustudeild
Should you encounter any issues or have questions regarding your Newhouse Hardware WCM120 Wireless Door Chime Kit that are not covered in this manual, please contact Newhouse Hardware customer support.
Fyrir frekari aðstoð, heimsækið opinberu Newhouse Hardware Store on Amazon.
