MOOER UK Gold 900 Micro Preamp Leiðbeiningarhandbók (M002)

Helstu eiginleikar

• High-quality dual-channel preamp.
• Independent 3-band EQ (Treble, Mid, Bass) for each channel.
• Independent Gain and Volume controls for each channel.
• Switchable speaker cabinet simulation.
• Two footswitch operating modes: On/Off or Channel A/B switching.
• Compact and durable metal housing.

Stýringar og tengingar

Mynd: Framan view of the MOOER UK Gold 900 Micro Preamp, showing the control knobs and footswitch.

• TRE (Treble) Knob: Stillir svörun við hátíðni.
• MID (Middle) Knob: Adjusts the mid-range frequency response.
• BASS hnappur: Stillir lágtíðnisvörunina.
• GAIN hnappur: Stýrir magni ofkeyrslu/bjögunar.
• VOL (hljóðstyrkur) hnappur: Stillir heildarúttaksstigið.
• CH/CAB Button:
  • Press to switch between Channel A and Channel B.
  • Press and hold to toggle the speaker cabinet simulation on or off.
• Fótrofi: Activates or bypasses the preamp, or switches between channels depending on the selected mode.
• Inntakstengi: Tengdu gítarinn þinn eða annað hljóðfæri.
• Útgangstengi: Tengstu við amplyftara, blöndunartæki eða hljóðviðmót.
• DC 9V aflinntak: Connect a 9V DC power adapter (center negative, 300mA minimum).

Mynd: Aftan view of the MOOER UK Gold 900 Micro Preamp, showing the 9V DC power input.

Mynd: Hlið view of the MOOER UK Gold 900 Micro Preamp, illustrating the input and output jacks.

Uppsetning

1. Rafmagnstenging: Connect a 9V DC power adapter (center negative, 300mA minimum) to the DC 9V input jack on the rear of the unit. Ensure the power supply meets these specifications to prevent damage.
2. Tækjatenging: Connect your guitar or other instrument to the INPUT jack on the right side of the preamp using a standard 1/4-inch instrument cable.
3. Úttakstenging: Connect the OUTPUT jack on the left side of the preamp til þín amplifier's input, effects loop return, or an audio interface/mixer.
4. Upphaflegar stillingar: Before powering on, set all control knobs (TRE, MID, BASS, GAIN, VOL) to their minimum positions to avoid sudden loud sounds.
5. Kveikt á: Once all connections are secure, apply power to the unit. The LED indicator will illuminate.

Notkunarleiðbeiningar

Rásarval

The UK Gold 900 features two channels, A and B, each with independent EQ, Gain, and Volume settings.

• To switch channels: Briefly press the CH/CAB button. The LED color will change to indicate the active channel (e.g., green for Channel A, red for Channel B).

Speaker Cabinet Simulation

Fyrirframamp includes an integrated speaker cabinet simulation, which is useful for direct recording or connecting to a PA system.

• To toggle cabinet simulation: Press and hold the CH/CAB button for approximately 2 seconds. The LED will flash to indicate the change.

Footswitch stillingar

The footswitch can operate in two different modes:

1. Kveikt/slökkt stilling: In this mode, the footswitch acts as a bypass, turning the preamp áhrif kveikt eða slökkt.
2. Channel A/B Mode: In this mode, the footswitch switches between Channel A and Channel B.

Refer to the product's full manual or manufacturer's website for instructions on how to switch between these footswitch modes, as this functionality is typically configured via a hidden switch or specific power-up sequence.

Tónastilling

Adjust the following controls to shape your sound:

• VINNA: Increase for more overdrive and distortion. Decrease for cleaner tones.
• BÓK: Stilltu heildarúttaksstyrkinn.
• TRE, MID, BASS: Use these three knobs to fine-tune the equalization for your desired tone.

Viðhald

• Þrif: Use a soft, dry cloth to clean the unit. Do not use liquid cleaners or solvents.
• Geymsla: Store the preamp in a dry environment, away from extreme temperatures and direct sunlight.
• Aflgjafi: Always use the specified 9V DC (center negative) power supply. Incorrect power can damage the unit.
• Tengingar: Ensure all cables are securely connected but do not overtighten. Disconnect cables when the unit is not in use for extended periods.

Úrræðaleit

• Ekkert hljóð:
  • Athugaðu allar kapaltengingar (inntak, úttak, aflgjafi).
  • Gakktu úr skugga um að aflgjafinn sé rétt tengdur og virki.
  • Verify that the volume knobs on the preamp og þitt amplifier are not set to zero.
  • Test with different cables and instruments to rule out faulty equipment.
• Undesired Noise/Buzz:
  • Ensure you are using a regulated 9V DC (center negative) power supply. Unregulated or incorrect power supplies can introduce noise.
  • Check for ground loops by trying different power outlets or isolating the power supply.
  • Reduce gain settings if the noise is excessive distortion.
  • Gakktu úr skugga um að allir kaplar séu varðir og í góðu ástandi.
• Fótrófinn svarar ekki:
  • Gakktu úr skugga um að kveikt sé á einingunni.
  • If the footswitch mode is set to Channel A/B, it will not bypass the effect.

Tæknilýsing

Ábyrgð og stuðningur

Fyrir upplýsingar um ábyrgð og tæknilega aðstoð, vinsamlegast vísið til opinberu MOOER website or contact your authorized MOOER dealer. Keep your purchase receipt as proof of purchase for warranty claims.

MOOER opinbert Websíða: www.mooeraudio.com