Vara lokiðview
The DS18 6XL600-8 is a high-performance 6.5-inch mid-range loudspeaker designed for professional car audio systems. It delivers clear and powerful sound with a robust construction for durability and optimal acoustic performance. This speaker is engineered to provide a wide frequency response and high sensitivity, ensuring an immersive audio experience.
Hvað er í kassanum
- DS18 6XL600-8 Mid-Range Loudspeaker (1 unit)
- Leiðbeiningarhandbók
Tæknilýsing
| Fyrirmynd | 6XL600-8 |
| Tegund | Hátalari í miðjum flokki |
| Stærð | 6.5 tommur |
| RMS máttur | 300 Watt |
| MAX máttur | 600 Watt |
| Viðnám | 8 Ohm |
| Næmi (1W / 1m) | 97dB |
| Tíðni svörun | 60Hz-12.5KHz |
| Þvermál raddspólu | 2 tommur |
| Segulefni | Ferrít |
| Segulþyngd | 34 únsur |
| Uppsetningardýpt | 3.44 tommur (87.5 mm) |
| Útskorin stærð | 5.9 tommur (150 mm) |
| Efni ramma | Rauð álkörfa |
| Keiluefni | Ópressað pappírskeila |
Uppsetning og uppsetning
Proper installation is crucial for optimal performance and longevity of your DS18 6XL600-8 loudspeaker. It is recommended to have professional installation for car audio components.
Uppsetning hátalarans
Ensure the mounting location has sufficient depth (3.44 inches) and a cut-out diameter of 5.9 inches. Use appropriate mounting hardware to secure the speaker firmly, minimizing vibrations.
Mynd: Framan view of the DS18 6XL600-8 speaker, showing the non-pressed paper cone and DS18 logo.
Mynd: Aftur view of the DS18 6XL600-8 speaker, highlighting the push-to-connect terminals for wiring.
Raflögn og tengingar
Tengdu hátalarann við samhæfan amplifier. Ensure correct polarity (+ to + and - to -) to avoid phase issues. The speaker has an 8-Ohm impedance and can handle up to 300W RMS power. Match the amplifier's output impedance and power to the speaker's specifications for optimal performance and to prevent damage.
The strategically designed ventilation system helps dissipate heat, ensuring reliable performance during prolonged high-volume use.
Notkunarleiðbeiningar
Once installed and wired correctly, your DS18 6XL600-8 loudspeaker is ready for operation. Follow these guidelines for the best audio experience:
- AmpLifier Stillingar: Stilltu þitt amplifier's gain levels appropriately. Start with low gain and gradually increase it until you achieve desired volume without distortion.
- Crossover stillingar: Nýttu þér amplifier's or head unit's crossover functions. For mid-range speakers, a high-pass filter is typically recommended to prevent low frequencies from reaching the speaker, which can cause distortion and damage. Refer to your amplifier's manual for specific crossover frequency recommendations.
- Hljóðstyrkur: Avoid excessive volume levels that lead to audible distortion. Distortion can damage the speaker over time.
Viðhald og umhirða
To ensure the longevity and continued performance of your DS18 6XL600-8 loudspeaker, follow these maintenance tips:
- Þrif: Use a soft, dry cloth to gently wipe the speaker cone and frame. Avoid using harsh chemicals or abrasive materials that could damage the speaker's components.
- Umhverfisskilyrði: Protect the speaker from direct exposure to excessive moisture, extreme temperatures, and direct sunlight for prolonged periods. While the aluminum basket offers durability, consistent exposure to harsh elements can degrade performance.
- Skoðun: Periodically inspect the speaker for any signs of damage, loose connections, or wear and tear. Address any issues promptly to prevent further problems.
Úrræðaleit
If you encounter issues with your DS18 6XL600-8 loudspeaker, refer to the following common troubleshooting steps:
- Ekkert hljóð:
- Athugaðu allar raflagnatengingar frá amplifier to the speaker for secure contact and correct polarity.
- Staðfestu að ampkveikt er á lyftaranum og virkar rétt.
- Ensure the audio source (head unit, media player) is active and sending a signal.
- Bjagað hljóð:
- Dragðu úr amplifier's gain setting. Excessive gain can lead to clipping and distortion.
- Check the crossover settings. Incorrect crossover points can cause the speaker to play frequencies it's not designed for, leading to distortion.
- Inspect the speaker cone for any physical damage.
- Lágt hljóðstyrkur:
- Auka amplifier's gain gradually.
- Ensure the audio source's volume is turned up.
- Check for any loose or corroded wiring connections that might impede signal flow.
Vörumiðlar
Myndir
Image: DS18 6XL600-8 speaker shown in its retail packaging.
Image: DS18 6XL600-8 speaker with a clear view of the wiring terminals.
Mynd: Framan view of the DS18 6XL600-8 speaker, highlighting the cone and logo.
Mynd: Ofan frá og niður view of the DS18 6XL600-8 speaker.
Mynd: Hlið view of the DS18 6XL600-8 speaker, showing its profile.
Mynd: Nærmynd view of the DS18 6XL600-8 speaker's push terminals.
Mynd: Aftur view of the DS18 6XL600-8 speaker, showing the magnet and frame design.
Myndbönd
Video: DS18 Mid-Range Loudspeakers overviewÞetta myndband veitir almenna yfirsýnview of DS18's mid-range loudspeaker line, including features and design.
Video: DS18 PRO XA 6.5 10th Anniversary Series Speaker. This video showcases the 10th Anniversary edition of the DS18 PRO XA 6.5 speaker, highlighting its design and features.
Video: PRO-GM6B Midrange loudspeaker Specs. This video details the specifications of the PRO-GM6B midrange loudspeaker, providing technical insights.
Video: DS18 6.5" Pro Audio Midrange Speakers with Black Bullet Tweeter. This video features the DS18 6.5" Pro Audio Midrange Speakers, showcasing their design and the integrated black bullet tweeter.
Video: PRO-X6.4BMPK Tech Talk and Specs. This video provides a technical discussion and detailed specifications for the PRO-X6.4BMPK speaker.
Ábyrgð og stuðningur
The DS18 6XL600-8 Mid-Range Loudspeaker comes with a Limited Warranty. For detailed warranty terms, service, or technical support, please refer to the official DS18 websíðuna eða hafðu samband við þjónustuver þeirra.
Þú getur heimsótt DS18 Store fyrir fleiri vörur og upplýsingar.
