Vara lokiðview
The TRUE GDM-19T-LD Glass Door Merchandiser is a commercial refrigeration unit designed for displaying and storing various products. It features a single swing glass door, LED interior lighting, and adjustable wire shelves. This unit is engineered for energy efficiency and reliable temperature maintenance, typically maintaining temperatures between +33°F and +38°F.
Framan view of the TRUE GDM-19T-LD Glass Door Merchandiser, showcasing its single glass door and internal shelving.
Uppsetning og uppsetning
Proper setup is crucial for optimal performance and longevity of your merchandiser. Follow these steps carefully:
- Upptaka: Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to your carrier.
- Staðsetning: Place the merchandiser on a level, sturdy surface capable of supporting its weight when fully loaded. Ensure adequate ventilation around the unit. Avoid direct sunlight or heat sources.
- Úthreinsun: Maintain a minimum of 3 inches (7.6 cm) clearance from walls or other obstructions on the sides and rear for proper airflow.
- Rafmagnstenging: Connect the unit to a dedicated grounded electrical outlet. Refer to the specifications section for electrical requirements. Do not use extension cords.
- Upphafsþrif: Before first use, clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry.
- Efnistaka: Use a level to ensure the unit is perfectly level. Adjust the leveling feet as needed.
- Uppsetning hillna: Install the adjustable wire shelves as desired. Ensure they are securely seated on the shelf clips.
Innrétting view of the merchandiser, showing the adjustable wire shelves and LED lighting.
Notkunarleiðbeiningar
Once installed, operating your TRUE merchandiser is straightforward:
- Kveikt á: Plug the unit into the electrical outlet. The internal lighting and refrigeration system will activate.
- Hitastýring: The unit is designed to maintain a temperature between +33°F and +38°F (0.5°C and 3.3°C). The temperature control is typically located inside the unit or on the front panel. Adjust as necessary within the recommended range.
- Hleður vörur: Load products evenly on the shelves. Do not block the air vents inside the unit, as this can impede airflow and affect cooling efficiency.
- Hurðaraðgerð: Ensure the glass door closes completely after each opening to maintain internal temperature and energy efficiency. The door features a self-closing mechanism.
- Afþíðingarferill: This unit features an automatic defrost system. During defrost, the evaporator coil is warmed to melt any accumulated ice. Water drains into an evaporator pan and is evaporated.
Viðhald
Regular maintenance ensures efficient operation and extends the life of your merchandiser.
Daglegt viðhald:
- Wipe down the exterior and interior surfaces with a clean cloth and mild, non-abrasive cleaner.
- Check that the door gasket is clean and sealing properly.
Mánaðarlegt viðhald:
- Þrif á þéttispólu: The condenser coil should be cleaned monthly or more frequently in dusty environments. Unplug the unit before cleaning. Use a stiff brush or vacuum cleaner to remove dust and debris from the coil. A dirty coil reduces efficiency and can lead to compressor failure.
- Skoðaðu rafmagnssnúruna með tilliti til skemmda.
Árlegt viðhald:
- It is recommended to have a qualified refrigeration technician inspect the unit annually for optimal performance.
Úrræðaleit Guide
Áður en þú hringir í þjónustuver skaltu athuga eftirfarandi algeng vandamál:
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Eining kólnar ekki |
|
|
| Óhóflegur hávaði |
|
|
| Vatn á gólfi |
|
|
Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Vörumerki | SATT |
| Fyrirmynd | GDM-19T-HC~TSL01 |
| Getu | 19 rúmfætur |
| Gerð uppsetningar | Frjálst |
| Fjöldi hurða | 1 (Gler) |
| Upptímakerfi | Sjálfvirk |
| Tegund hillu | Wire (4 adjustable shelves) |
| Hitastig | +33°F til +38°F (0.5°C til 3.3°C) |
| Ytri frágangur | Non-chip, non-peel vinyl (Black or White) or Stainless Steel |
| Innri frágangur | NSF approved white anodized aluminum |
| Lýsing | Standard LED interior lighting |
Ábyrgð og stuðningur
For warranty information and technical support, please refer to the official TRUE Manufacturing website or contact their customer service department. Keep your purchase receipt and model number readily available when contacting support.
Verndaráætlanir eru í boði fyrir framlengda þjónustu:
- Tveggja ára verndaráætlun: $159.99
- Tveggja ára verndaráætlun: $239.99
- Algjör vernd (mánaðarlega): $16.99 á mánuði
Til að fá frekari aðstoð getur þú heimsótt TRUE verslun á Amazon.
