Shinko R525 Cheater Rear Tire (110/90-19 62M)

Notendahandbók fyrir Shinko R525 Cheater afturdekk

Model: Shinko R525 Cheater Rear Tire (110/90-19 62M)

Vörumerki: Shinko

1. Vöru lokiðview

The Shinko R525 Cheater Rear Tire is a specialized off-road motorcycle tire designed for extreme single track and hard enduro conditions. It combines the soft, sticky rubber compound found in trials tires with a knobby tread pattern, offering superior traction across a wider range of soil conditions compared to traditional trials tires. This hybrid design aims to improve braking performance and traction in loose soil, making it an ideal choice for challenging off-road environments.

The R525 model excels in looser, loamier soil conditions, providing enhanced confidence for riders navigating demanding terrain.

Shinko R525 Cheater Rear Tire, side view

Mynd 1.1: Hlið view of the Shinko R525 Cheater Rear Tire, showcasing its aggressive knobby tread pattern.

2. Uppsetning og uppsetning

Proper installation of the Shinko R525 Cheater Rear Tire is critical for safety and performance. It is highly recommended that tire installation be performed by a qualified professional using appropriate tools and safety procedures.

2.1 Öryggisráðstafanir

2.2 Mounting Instructions (General Guidelines)

  1. Fjarlægðu gamla dekkið: Deflate the old tire, break the beads, and carefully remove it from the rim.
  2. Inspect Rim: Thoroughly inspect the rim for any damage, cracks, or sharp edges. Clean the rim thoroughly.
  3. Smyrja: Apply a generous amount of tire mounting lubricant to both beads of the new Shinko R525 tire and the rim flanges.
  4. Position Tire: Place one bead of the tire over the rim. For the second bead, use tire irons carefully, taking small bites to avoid pinching the inner tube (if applicable) or damaging the tire bead or rim.
  5. Install Inner Tube (if applicable): If using an inner tube, slightly inflate it before inserting it into the tire to prevent pinching.
  6. Pússa í dekk: Slowly inflate the tire, ensuring both beads seat properly on the rim. Listen for two distinct "pops" as the beads seat. Do not exceed the maximum seating pressure indicated on the tire sidewall.
  7. Check Bead Seating: Visually inspect the tire around the entire circumference on both sides to ensure the beads are evenly seated. There should be a uniform line visible just above the rim flange.
  8. Stilla þrýsting: Once seated, adjust the tire pressure to the recommended operating pressure for your specific riding conditions and motorcycle.
Close-up of Shinko R525 Cheater Rear Tire tread

Mynd 2.1: Nærmynd view of the Shinko R525 Cheater Rear Tire's aggressive tread blocks, designed for maximum grip.

3. Operating Conditions and Performance

The Shinko R525 Cheater Rear Tire is engineered for optimal performance in specific off-road conditions. Understanding its design intent will help maximize its benefits.

3.1 Fyrirhuguð notkun

3.2 Árangurs einkenni

Að ofan view of Shinko R525 Cheater Rear Tire tread pattern

Mynd 3.1: Ofan frá og niður view highlighting the unique tread pattern of the Shinko R525 Cheater Rear Tire, optimized for off-road grip.

4. Viðhald

Regular maintenance extends the life of your Shinko R525 Cheater Rear Tire and ensures consistent performance.

4.1 Dekkþrýstingur

4.2 Skoðun

4.3 Hreinsun og geymsla

Full top-down view of Shinko R525 Cheater Rear Tire

Figure 4.1: Full top-down view of the Shinko R525 Cheater Rear Tire, showing the complete tread pattern from bead to bead.

5. Bilanagreining

This section addresses common issues you might encounter with your Shinko R525 Cheater Rear Tire.

ÚtgáfaMöguleg orsökLausn
Loss of Traction / Poor GripIncorrect tire pressure (too high or too low), worn tread, unsuitable terrain for tire type, suspension issues.Adjust tire pressure to recommended levels for terrain. Inspect tread wear. Ensure tire is suitable for conditions. Check motorcycle suspension.
Ójafn slit á slitfletiImproper tire pressure, unbalanced wheel, worn suspension components, aggressive riding style.Maintain correct tire pressure. Have wheel balanced. Inspect and service suspension. Adjust riding style.
Tíð stungurLow tire pressure, sharp objects in riding area, old or damaged inner tube (if applicable), rim strip issues.Maintain proper tire pressure. Avoid riding over sharp debris. Replace inner tube if damaged. Inspect and replace rim strip. Consider heavy-duty tubes or tubeless conversion if applicable.
Tire Wobble / VibrationImproperly seated bead, unbalanced wheel, damaged tire, bent rim.Re-seat tire bead. Have wheel balanced. Inspect tire for damage. Check rim for trueness. Seek professional assistance if issue persists.

6. Tæknilýsing

Key technical specifications for the Shinko R525 Cheater Rear Tire (110/90-19 62M):

EiginleikiGildi
VörumerkiShinko
FyrirmyndR525 Cheater Rear Tire
Stærð dekkja110/90-19
Hlaða einkunn62 (Equivalent to 584 lbs / 265 kg)
Hraði einkunnM (Up to 81 mph / 130 km/h)
Felgustærð19 tommur
HjólbarðargerðOff-road, Hybrid Hard Enduro / Extreme Single Track
UmsóknAftan
UPC644978374246
Hlutanúmer framleiðanda87-4328S

7. Upplýsingar um ábyrgð

Shinko Tires typically come with a limited warranty covering manufacturing defects. Specific warranty terms and conditions may vary by region and product. For detailed warranty information, please refer to the official Shinko Tires website or contact your authorized Shinko dealer. Keep your proof of purchase for any warranty claims.

8. Þjónustudeild

For technical assistance, product inquiries, or support regarding your Shinko R525 Cheater Rear Tire, please contact Shinko Tires customer service or your local authorized dealer. You can usually find contact information on the official Shinko Tires websíða.

When contacting support, please have your tire's model number (R525 Cheater Rear Tire), size (110/90-19), and any relevant purchase information ready.

Tengd skjöl - R525 Cheater Rear Tire (110/90-19 62M)

Preview Leiðbeiningarhandbók fyrir Shinko HR-706 Hybrid upptökutæki (punktaprentun)
Þessi ítarlega leiðbeiningarhandbók veitir ítarlegar leiðbeiningar um Shinko HR-706 Hybrid upptökutækið. Hún nær yfir nauðsynlegar upplýsingar um örugga notkun, uppsetningu, raflögn, stillingar tækisins, samskiptareglur, viðhaldsferli, bilanaleit vegna algengra vandamála og tæknilegar upplýsingar til að tryggja bestu mögulegu afköst og endingu tækisins.
Preview Shinko HR-700シリーズ ハイブリッド記録計:コンパクト、高視認性産業用デーキ
Shinko HR-700シリーズハイブリッド記録計の仕様、特徴、寸法。コンパクト設計表示、IP65準拠、産業オートメーション向けの多様な入力オプションを特長としています。
Preview Shinko SIF-600 PLC tengieining: Leiðbeiningarhandbók
Þessi ítarlega leiðbeiningarhandbók lýsir Shinko SIF-600 PLC tengieiningunni og fjallar um uppsetningu, uppsetningu, notkun og bilanaleit fyrir iðnaðarsjálfvirkni. Nauðsynlegt fyrir örugga og skilvirka notkun.
Preview Leiðbeiningarhandbók fyrir stafrænan vísistýringu Shinko ACS2
Ítarleg leiðbeiningarhandbók fyrir Shinko ACS2 stafræna vísistýringuna, sem fjallar um uppsetningu, raflögn, notkun, stillingar og bilanaleit fyrir iðnaðarhitastýringarforrit.
Preview Leiðbeiningarhandbók fyrir Shinko QMC1 samskiptaútvíkkunareiningu
Þessi leiðbeiningarhandbók veitir ítarlegar upplýsingar um Shinko QMC1 samskiptaútvíkkunareininguna, þar á meðal uppsetningu, raflögn, notkun, samskiptareglur og forskriftir fyrir iðnaðarstýrikerfi. Kynntu þér eiginleika hennar, uppsetningu og samþættingu við tölvur og PLC-stýringar.
Preview WIL-101-TU デジタル指示濁度/SS 計 取扱説明書
SHINKO WIL-101-TU デジタル指示濁度/SS計の取扱説明書。本製品の設置、機能、操作、配線、仕様、校正、通信、およびトラブルシューティングに関する詳細情報を提供します。