Moxa EDS-208 8-Port Unmanaged Ethernet Switch

1. Inngangur

This manual provides instructions for the installation, operation, and maintenance of the Moxa EDS-208 8-Port Unmanaged Ethernet Switch. The EDS-208 is designed for industrial networking applications, offering reliable 10/100BaseT(X) Ethernet connectivity in a compact, unmanaged form factor.

2. Öryggisupplýsingar

• Lesið allar leiðbeiningar vandlega áður en tækið er notað.
• Gakktu úr skugga um að aflgjafinn voltage is within the specified range for the device. A power supply is not included and must be purchased separately.
• Ekki útsetja tækið fyrir raka eða miklum hita.
• Aðeins hæft starfsfólk ætti að framkvæma uppsetningu og viðhald.
• Aftengdu rafmagnið áður en þú þrífur eða þjónustar tækið.

3. Innihald pakka

Áður en sett er upp skal ganga úr skugga um að pakkinn innihaldi eftirfarandi hluti:

• Moxa EDS-208 óstýrður Ethernet-rofi
• Leiðbeiningar um fljótlega uppsetningu (ef fylgja með)
• Ábyrgðarkort (ef innifalið)

Ef eitthvað af þessum hlutum vantar eða er skemmt, vinsamlegast hafið samband við sölufulltrúa ykkar til að fá aðstoð.

4. Vöru lokiðview

Mynd 1: Moxa EDS-208 Unmanaged Ethernet Switch. This image displays the Moxa EDS-208 unmanaged Ethernet switch. The front panel features eight 10/100BaseT(X) RJ45 ports, numbered 1 through 8. Above the ports, the Moxa logo is visible, along with a 'P' indicator and a power LED. At the top, a green removable terminal block is present for power input. The device has a dark grey plastic housing with ribbed sides for heat dissipation.

4.1. Skipulag framhliðar

• Rafmagnsinntakstengiblokk: Located at the top, a green removable terminal block for connecting the DC power supply.
• Power LED (P): Gefur til kynna orkustöðu tækisins.
• 10/100BaseT(X) Ports (1-8): Eight RJ45 ports for connecting Ethernet devices. Each port supports 10 Mbps or 100 Mbps operation.
• Hlekkur/virkni LED: Integrated into each RJ45 port, these LEDs indicate network link status and data activity.

5. Uppsetning

5.1. Rofi settur upp

The EDS-208 supports DIN-rail mounting. To mount the switch:

1. Attach the DIN-rail mounting kit (if not pre-installed) to the rear of the switch.
2. Festið efri hluta DIN-skinnaklemmunnar yfir efri brún DIN-skinunnar.
3. Press the switch firmly against the DIN rail until the clip snaps into place.

5.2. Tengja máttur

Important: A power supply is NOT included with the EDS-208 and must be purchased separately. Ensure the power supply meets the device's voltage og núverandi kröfur.

1. Gakktu úr skugga um að slökkt sé á aflgjafanum.
2. Connect the positive and negative wires from your DC power supply to the corresponding terminals on the green removable terminal block at the top of the switch. Refer to the terminal block markings for correct polarity.
3. Insert the terminal block firmly into its receptacle on the switch.
4. Turn on the power source. The 'P' LED on the front panel should illuminate, indicating power is supplied.

5.3. Tenging nettækja

Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to any of the eight RJ45 ports on the front panel of the EDS-208. The switch automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of the connected devices.

6. Notkun rofans

6.1. LED vísar

The EDS-208 features several LED indicators to provide status information:

• Power LED (P):
  • Á: Rofinn fær orku.
  • Slökkt: Rofinn fær ekki afl.
• Link/Activity LEDs (per RJ45 port):
  • Á: Gild nettenging er komin á.
  • Blikkandi: Gögnum er verið að senda eða taka á móti í gegnum tengið.
  • Slökkt: Engin nettenging er komin á.

6.2. Grunnvirkni

The EDS-208 is an unmanaged switch, meaning it operates automatically without requiring any configuration. It provides basic Ethernet switching functions, including:

• Store-and-Forward Switching: Ensures data integrity by checking for errors before forwarding frames.
• Sjálfvirk samningaviðræður: Automatically determines the best speed and duplex mode for each connected device.
• Sjálfvirkt MDI/MDI-X: Automatically detects and adjusts for straight-through or crossover Ethernet cables.
• Broadcast Storm Protection: Helps prevent network congestion caused by excessive broadcast traffic.

7. Viðhald

7.1. Þrif

To clean the switch:

1. Disconnect power to the device.
2. Notið mjúkan, þurran klút til að þurrka ytra byrði rofans.
3. Ekki nota fljótandi hreinsiefni eða úðabrúsa, þar sem þau geta skemmt tækið.

7.2. Umhverfissjónarmið

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in areas with excessive dust, vibration, or direct sunlight. Proper ventilation is crucial for optimal performance and longevity.

8. Bilanagreining

9. Tæknilýsing

10. Ábyrgð og stuðningur

10.1. Upplýsingar um ábyrgð

Moxa products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa webGeymið kaupkvittunina vegna ábyrgðarkröfu.

10.2. Tæknileg aðstoð

If you encounter any issues that cannot be resolved using this manual, please contact Moxa technical support. You can find contact information on the official Moxa webvefsvæði (www.moxa.com) eða í gegnum staðbundinn dreifingaraðila.