VEVOR 6KW Sauna Heater with Internal Controller Instruction Manual

Inngangur

This manual provides essential information for the safe and efficient operation of your VEVOR 6KW Sauna Heater. Please read all instructions carefully before installation, operation, or maintenance. Retain this manual for future reference.

Mikilvægar öryggisleiðbeiningar

• Rafmagnshætta: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure proper grounding.
• Hætta á bruna: The sauna heater and stones become extremely hot during operation. Avoid direct contact. Keep children and pets away from the heater.
• Eldhætta: Do not place flammable materials near the heater. Ensure adequate clearance from walls and benches as specified in the installation section. Do not operate without sauna stones.
• Loftræsting: Proper ventilation is crucial for safe operation. Ensure the sauna room has adequate air circulation.
• Vatnsnotkun: Only pour small amounts of water onto the hot stones to create steam. Excessive water can damage the heating elements and pose a safety risk.
• Viðhald: Aftengdu rafmagnið áður en viðhald eða þrif eru framkvæmd.

Vara lokiðview

The VEVOR 6KW Sauna Heater is designed for dry steam baths in home and commercial sauna rooms. It features a durable stainless steel construction, efficient heating coils, and an internal control system for easy temperature and time adjustments.

Figure 1: VEVOR 6KW Sauna Heater with internal controls.

Helstu eiginleikar:

• Premium smíði: Stainless steel shell for durability and corrosion resistance.
• Hraðhitun: 316 stainless steel heating coils ensure rapid heat-up.
• Innra eftirlit: Integrated knobs for adjusting temperature (up to 90°C) and operating time (up to 60 minutes).
• Hönnun á vegg: Space-saving installation with pre-drilled brackets.
• Suitable Room Size: Designed for sauna rooms between 5-9m³ (176-318 cubic feet) with a height of approximately 190cm.

Figure 2: Illustration of the sauna heater's stainless steel structure and heating elements.

Figure 3: Close-up of the built-in temperature and timer controls.

Tæknilýsing

Mynd 4: Nákvæmar vöruvíddir og upplýsingar.

Uppsetning og uppsetning

Installation of the VEVOR Sauna Heater requires careful attention to electrical and safety guidelines. It is highly recommended that a qualified electrician performs the electrical wiring.

1. Athugasemdir fyrir uppsetningu:

• Ensure your sauna room meets the recommended volume and height requirements (5-9m³, approx. 190cm height).
• Verify that your electrical supply matches the heater's requirements (220-240V).
• Prepare the necessary wiring (3*10 N*mm² wire recommended).
• Tryggið nægilega loftræstingu í gufubaðinu.

2. Mounting the Heater:

1. Measure the distance of the screw holes on the back of the sauna stove.
2. Mark the corresponding positions on the sauna room wall.
3. Install screws on the wall, ensuring they are approximately 35cm (13.8 inches) above the ground.
4. Carefully hang the sauna stove onto the installed screws, ensuring it is securely in place.

Figure 5: Illustration of the wall-mounted installation process, showing the pre-drilled brackets.

3. Electrical Wiring (220-240V):

VIÐVÖRUN: Electrical installation must be performed by a licensed electrician. Ensure power is disconnected at the main breaker before starting any wiring.

• Locate the wiring terminal block inside the heater's control panel.
• Connect the L1 and L2 (live) wires from your power supply to the corresponding L1 and L2 terminals on the heater.
• Connect the ground wire to the ground terminal (marked with a ground symbol).
• Gakktu úr skugga um að allar tengingar séu þéttar og öruggar.

4. Loading Sauna Stones:

• Place approximately 18kg (35 lbs) of sauna stones into the stone compartment.
• Ensure the stones are not packed too densely to allow for proper air circulation and heat distribution.
• The stones should cover the heating elements but not obstruct the air vents.
• Note: Sauna stones are not included with the heater.

Figure 6: Sauna heater with stones in place, ready for use.

Notkunarleiðbeiningar

Once installed and wired correctly, your VEVOR Sauna Heater is ready for operation.

1. Stilling á tímamæli:

• Turn the timer knob to your desired operating time, up to a maximum of 60 minutes.
• The heater will begin to heat once the timer is set.

2. Að stilla hitastig:

• Turn the temperature knob to set the desired sauna temperature. The maximum temperature is 90°C (194°F).
• Hitarinn mun kveikja og slökkva á sér til að halda uppsettu hitastigi.

3. Creating Steam (Löyly):

• Once the stones are hot, carefully ladle small amounts of water onto them to create steam.
• Do not pour large quantities of water at once, as this can damage the heater and create excessive steam.
• Notaðu aðeins hreint vatn.

Figure 7: Enjoying a sauna session with steam generated by the heater.

Viðhald

Regular maintenance ensures the longevity and safe operation of your sauna heater.

• Þrif: Periodically wipe down the exterior of the heater with a damp klút. Ekki nota slípiefni eða leysiefni.
• Stone Inspection: Inspect sauna stones regularly for signs of crumbling or deterioration. Replace any broken or worn-out stones to ensure efficient heating and prevent damage to the elements.
• Rafmagnstengingar: Annually, have a qualified electrician inspect all electrical connections for tightness and signs of wear.
• Loftræsting: Ensure that air vents are not blocked by debris or lint.

Úrræðaleit

Ábyrgð og stuðningur

For warranty information, technical support, or replacement parts, please contact VEVOR customer service. Refer to your purchase documentation for specific warranty terms and conditions.

Framleiðandi: VEVOR

Websíða: www.vevor.com