JMGO Rechargeable Active 3D Shutter Glasses (Model JmGO-3DGS0704) User Manual

1. Inngangur

This manual provides essential information for the safe and effective use of your JMGO Rechargeable Active 3D Shutter Glasses. Please read these instructions thoroughly before operating the device and retain them for future reference.

2. Öryggisupplýsingar

• Do not expose the glasses to extreme temperatures, direct sunlight, or high humidity.
• Forðist að missa gleraugun eða láta þau verða fyrir hörðum höggum.
• Geymið þar sem lítil börn ná ekki til.
• Notaðu aðeins meðfylgjandi hleðslusnúru.
• If you experience discomfort, eye strain, or dizziness, discontinue use immediately.
• These glasses are designed for use with compatible JMGO DLP-Link 3D projectors and Laser TVs only.

3. Innihald pakka

• JMGO 3D Glasses
• Hleðslusnúra (USB)
• Hreinsunarklút
• Notendahandbók

4. Vöru lokiðview

The JMGO Rechargeable Active 3D Shutter Glasses are designed to enhance your 3D viewing experience with compatible JMGO projectors. They feature high-tech light-speed LCD shutter technology for bright, sharp, and high-contrast 3D images.

Figure 1: JMGO Rechargeable Active 3D Shutter Glasses

Helstu eiginleikar:

• High-tech light-speed LCD shutter technology: Provides bright, sharp, and high-contrast 3D resolution.
• Perfect support for JMGO DLP-LINK 3D Technology: Optimized for JMGO smart home projectors and ultra HD laser TVs.
• Orkunýtni: Features auto power-off, low power consumption, low battery detection, and a high-capacity rechargeable battery for up to 40 hours of use on a single charge.
• Létt hönnun: Weighing only 26g for comfortable extended wear.
• Varanlegur smíði: Double material combination of glass and liquid crystal with a high hardness polarizer for a clear picture and higher contrast.

Figure 2: DLP-Link Master Chip for smooth video synchronization.

Figure 3: One-Click 3D format automatic switching button for ease of use.

5. Uppsetning

5.1 Hleðsla glerauganna

Before first use, fully charge the 3D glasses. Connect the provided USB charging cable to the charging port on the glasses and to a standard USB power source. A full charge can last up to 40 hours.

Figure 4: Charging port location on the glasses.

5.2 Samhæfni

These 3D glasses are specifically designed to work with JMGO DLP-Link 3D Projectors and Laser TVs. Ensure your projector supports DLP-Link 3D technology for optimal performance.

6. Notkunarleiðbeiningar

6.1 Powering On/Off and Switching Modes

Locate the power button on the bridge of the glasses. Press it once to turn the glasses on. The indicator light will illuminate. To switch between left and right eye synchronization (if needed for specific content), press the button again. To turn off the glasses, press and hold the power button for approximately 3 seconds until the indicator light turns off.

6.2 Using with a Projector

1. Ensure your JMGO projector is powered on and displaying 3D content.
2. Turn on the 3D glasses by pressing the power button once.
3. The glasses should automatically synchronize with the DLP-Link signal from the projector within 6 seconds.
4. If the 3D effect is not correct (e.g., blurry or inverted depth), press the power button on the glasses again to switch the left/right eye synchronization.
5. Fyrir bestu viewing, ensure the room lighting is appropriate for 3D content.

7. Viðhald

• Þrif: Use the provided cleaning cloth to gently wipe the lenses. Do not use abrasive cleaners, alcohol, or solvents, as these can damage the lens coating.
• Geymsla: Store the glasses in a cool, dry place away from direct sunlight and extreme temperatures. Keep them in a protective case when not in use to prevent scratches.
• Umhirða rafhlöðu: To prolong battery life, avoid fully discharging the glasses frequently. Charge them regularly, even if not in constant use.

8. Bilanagreining

• No 3D Effect / Blurry Image:
  • Gakktu úr skugga um að gleraugun séu fullhlaðin og kveikt á þeim.
  • Verify your projector is outputting a DLP-Link 3D signal.
  • Press the power button on the glasses to switch the left/right eye synchronization.
  • Check that the 3D content is correctly formatted (e.g., Frame Packing, Side-by-Side, Top-and-Bottom) on your projector settings.
  • Ensure there are no obstructions between the glasses and the projector's 3D emitter.
• Glasses Not Turning On:
  • Charge the glasses for at least 30 minutes.
  • Try pressing and holding the power button for 5 seconds to reset.
• Stuttur rafhlaðaending:
  • Gakktu úr skugga um að gleraugun séu fullhlaðin fyrir notkun.
  • The glasses have an auto power-off function if no signal is detected for 30 seconds. Ensure this is functioning correctly.

9. Tæknilýsing

10. Ábyrgð og stuðningur

JMGO is confident in the quality of its smart 3D glasses, which are manufactured under strict quality standards. For any problems or inquiries, please contact JMGO customer service. We are committed to resolving all your concerns within 24 hours.

For support, please visit the official JmGO Store on Amazon or contact customer service directly via email.

• JmGO Store: Visit JmGO Store
• Netfang þjónustuvers: after-sales@jmgo.com