Sérsniðin Dynamics ProBEAM 5 3/4" LED aðalljósamp Leiðbeiningarhandbók

Inngangur

This manual provides detailed instructions for the installation, operation, and maintenance of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp, model PB-575-B. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Mynd 1: Framan view of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B). This image shows the clear lens, the upper LED light bars, and the lower projector-style LED elements, along with the Custom Dynamics logo at the bottom.

Öryggisupplýsingar

Fylgdu alltaf eftirfarandi öryggisráðstöfunum:

• Aftengdu rafgeymi ökutækisins áður en nokkur rafmagnsvinna er framkvæmd.
• Gakktu úr skugga um að allar tengingar séu öruggar og rétt einangraðar til að koma í veg fyrir skammhlaup.
• Ráðfærðu þig við hæfan tæknimann ef þú ert óviss um einhver uppsetningarskref.
• Do not modify the headlamp in any way, as this may void the warranty and compromise safety.
• Notið viðeigandi persónuhlífar (PPE) við uppsetningu.

Innihald pakka

Gakktu úr skugga um að allir íhlutir séu til staðar áður en uppsetning hefst:

• 1x Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B)
• 1x Wiring Harness (if applicable, check product packaging)
• 1x Leiðbeiningarhandbók (þetta skjal)

Uppsetning og uppsetning

1. Undirbúningur: Park the vehicle on a level surface and turn off the ignition. Disconnect the negative terminal of the vehicle's battery.
2. Remove Existing Headlamp: Carefully remove the bezel or retaining ring securing the existing 5 3/4" headlamp. Disconnect the wiring harness from the old headlamp.
3. Install ProBEAM Headlamp: Connect the wiring harness of the ProBEAM LED headlamp to the vehicle's headlamp connector. Ensure the connection is secure.
4. Secure Headlamp: Place the ProBEAM LED headlamp into the headlamp bucket. Reinstall the retaining ring or bezel to secure the headlamp á sínum stað.
5. Tengdu rafhlöðuna aftur: Tengdu aftur neikvæða pól rafgeymis ökutækisins.
6. Prófvirkni: Turn on the vehicle's ignition and test the headlamp's low beam, high beam, and any integrated auxiliary functions (e.g., daytime running lights, if applicable).
7. Markmið: Stilltu hausinnamp aim according to local regulations and for optimal visibility without blinding oncoming traffic. Refer to your vehicle's service manual for specific aiming procedures.

Note: Specific installation steps may vary depending on the vehicle model. Always refer to your vehicle's service manual for detailed instructions on removing and installing headlamps.

Notkunarleiðbeiningar

The Custom Dynamics ProBEAM LED Headlamp operates in conjunction with your vehicle's existing headlamp switch. It features both low beam and high beam functions.

• Lágu ljósin: Activate your vehicle's low beam setting for standard illumination.
• Háuljós: Activate your vehicle's high beam setting for increased illumination when conditions permit.

The LED technology provides instant-on illumination and a crisp, clear light output. No special operating procedures are required beyond standard vehicle headlamp aðgerð.

Viðhald

The Custom Dynamics ProBEAM LED Headlamp er hannað til langvarandi afköst með lágmarks viðhaldi.

• Þrif: Hreinsaðu hausinnamp lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the lens.
• Skoðun: Skoðaðu hausinn reglulegaamp for any signs of damage, loose connections, or moisture ingress.
• Skipt um peru: The LED elements are designed to last the lifetime of the product and are not user-replaceable. If the headlamp malfunctions, contact Custom Dynamics support.

Úrræðaleit

Tæknilýsing

Ábyrgð og stuðningur

For warranty information, technical support, or replacement parts, please contact Custom Dynamics directly. Refer to the official Custom Dynamics website for the most current warranty policy and contact details.

Custom Dynamics Contact Information:

• Websíða: www.customdynamics.com
• Sími: Vísað er til websíða fyrir núverandi símanúmer.
• Email: Refer to websíða fyrir núverandi tengiliðsnetfang.